Vds lots de switchs niveau 2,3

Vds lots de switchs niveau 2,3 - Hardware - Achats & Ventes

Marsh Posté le 17-03-2010 à 23:21:12    

Ayant un stock de switchs niveau 2,3, je vous propose si vous êtes intéresser les différents équipements suivants:
 
Equipements :

Nortel Networks Commutateur niveau 3 (vlan, Switching,..)

 
Bay Networks :
 
Trois switchs Bay Stack 250 12 ports 10/100 HUB
 
Description:
 
The BayStack 250 Series 10/100 Autosense Hubs deliver high-performance and flexible Ethernet connectivity for power workgroups - all at an unprecedented price-per-port value. All BayStack 250 Series 10/100 Autosense Hubs support 10/100 autosensing on all ports, enabling seamless migration from 10 Mbps to 100 Mbps connections. Equally important, they do so without requiring time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. A built-in two-port switch in the BayStack 250, 253, 254, and 255 Hubs provides high-speed connectivity between 10 Mbps users and 100 Mbps users. The built-in two-port switch allows for greater performance through segmentation. This eliminates the need for an external switch to communicate between 10 Mbps users and 100 Mbps users.Versatile and flexible, BayStack 250 Series 10/100 Autosense Hubs satisfy a range of needs: from small, unmanaged LANs to large, feature-rich managed networks. As demands grow, users can stack up to five hubs. The stack will function as a single managed unit, providing a scalable solution that enables networks to grow incrementally for a very affordable investment.
 
 
 
 
1 Bay Stack  Optivity Stack Probe model FE2400T
 
Description:
 
This probe provides simple and flexible deployment of RMON and RMON2 throughout any heterogeneous network environment. It also provides the critical information needed to proactively monitor and identify critical network traffic problems before they result in costly network downtime.
 
 
1 switch  Bay Networks BayStack 152 10baseT Hub 24 ports:

 
Description:
 
Bay Networks BayStack 152 10BaseT Hub is a multi-port hub which is ideal for creating or expanding your current network setup.
 
 

Hewlett-Packard

 
Deux switch Switch HP Procurve J2600A
 
Caractéristiques techniques :
 
Switch Hub Ethernet RJ-45 + ThinLan Coaxial BNC
IEEE 802.3 10base-T
12x RJ-45 + 1x BNC ThinLan
Interface RS232.
Possibilité d'ajouter des cartes d'extension
110/240V - 50/60 Hz - 0,6A typical - 1,0A max
offert 1 module Fiber optics 1Gbe  
 
 

Alcatel Commutateurs Ethernet de niveau 3 :

 
 
 
Un switch Alcatel Omnistack 5024

 
24 ports 10/100 ethernet + 2 ports gigabit ethernet fibre optique
 
Caractéristique :
 
24 fixed 10/100 Ethernet switch ports
 
Modular backbone connectivity options:
Fast/Gigabit Ethernet
ATM E3/DS-3, 155 Mbps, 622 Mbps
OC3c (155 Mbps)-packet over
SONET/SDH
Channelized DS-3
Clear channel T3
Frame relay
PPP
Integrated routing
LANE
Policy-based VLANs
SNMPv1/MIB-I & MIB-II management
RMON-I (four groups):
Statistics, Alarms, Events, History
Redundant power supply option
Optional hardware layer 3 switching.
 
Six switchs Alcatel Omnistack 4024C
 
Caractéristiques
24 ports 10/100 ethernet
Policy-based VLANs
rated software routing
Standards-based IP multicast switching and routing
SNMP and RMON-1
Port mirroring
Link aggregation
IEEE 802.1q (VLAN trunking / tagging)
Switched Network Services (SNS)
 
Un module ethernet Gigabit(Module pour Alcatel Omnistack)
 
 
Un Routeur Cisco 2500:

 
Description
Routeur Cisco series 2500 + Cisco ISOLATION UNIT + 1 câble console + doc adminstration
 
Me faire offre si intéresser pour ce lot.


Message édité par azlaf le 17-03-2010 à 23:33:55
Reply

Marsh Posté le 17-03-2010 à 23:21:12   

Reply

Marsh Posté le 17-03-2010 à 23:24:57    

:hello:  
 
Post non conforme au règlement du forum, pas de mail sur le post et tous ce passe ici.


---------------
|ASUS P6T Deluxe | I7 920@3,8Ghz | 3 x 2Go G.Skill Trident PC3-128000CL6T | ASUS 5870 | Corsair HX 620 Watts | WC 1A-PowerUnit 240  HK3.0 CU |
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed