Disque dur WD3200AAJS - Démarre puis s'arrête tout seul

Disque dur WD3200AAJS - Démarre puis s'arrête tout seul - Disque dur - Hardware

Marsh Posté le 12-02-2012 à 22:07:58    

Salut à tous,
 
Voilà, je viens de retrouver un vieux disque externe Western Digital de 320Go qui traînait et qui, auparavant, n'avait jamais eu de problème (mais il n'a pas eu à fonctionner depuis au moins 2 ans).
 
Quand je l'allume (que l'USB soit branché ou non à l'ordinateur), il se met à tourner sans, me semble-t-il, de bruit bizarre ou autre click of death mais au bout de 2 ou 3 "essais" (je sais pas comment appeler ça autrement) pour lire ou se positionner, il s'arrête tout seul et ne tourne plus (comme s'il revenait à sa position d'arrêt).
 
Il est invisible dans les périphériques mais sous Gsmartcontrol (je travaille sous Ubuntu 11.10), il apparaît sous le sigle "no information found".
 
J'imagine qu'il est mort ou pas loin mais si malgré tout vous avez une piste, n'hésitez pas.
 
Merci
 
Bye
 
Fish

Reply

Marsh Posté le 12-02-2012 à 22:07:58   

Reply

Marsh Posté le 13-02-2012 à 07:15:36    

Essaies le éventuellement en interne : si idem, il est HS.


---------------
Logiciels Automatisés, Mises à jour et paramétrages de Windows automatisés, Logiciels maisons et tutoriels
Reply

Marsh Posté le 13-02-2012 à 14:25:54    

Aïe, rien pour le brancher en interne (je n'ai qu'un laptop sous la main).
 
Est-ce qu'il y aurait d'autres moyens de diagnostiquer ?
 
J'ai essayé dmesg :
 

Code :
  1. [107479.682583] ohci_hcd 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  2. [107479.696120] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xd0447000-0xd04470ff] (PCI address [0xd0447000-0xd04470ff])
  3. [107479.696145] ehci_hcd 0000:00:12.2: restoring config space at offset 0xf (was 0x200, writing 0x203)
  4. [107479.696179] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  5. [107479.696251] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x100, writing 0x104)
  6. [107479.696285] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
  7. [107479.696379] ohci_hcd 0000:00:14.5: restoring config space at offset 0xf (was 0x300, writing 0x30b)
  8. [107479.696690] ohci_hcd 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  9. [107479.712173] ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0xd0444000-0xd04440ff] (PCI address [0xd0444000-0xd04440ff])
  10. [107479.712196] ehci_hcd 0000:00:16.2: restoring config space at offset 0xf (was 0x200, writing 0x203)
  11. [107479.712230] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  12. [107479.712525] rts_pstor 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
  13. [107479.712560] rts_pstor 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0300000)
  14. [107479.712572] rts_pstor 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  15. [107479.712587] rts_pstor 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  16. [107479.712659] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107)
  17. [107479.712684] r8169 0000:06:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd010000c)
  18. [107479.712699] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd010400c)
  19. [107479.712713] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
  20. [107479.712725] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  21. [107479.712739] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
  22. [107479.712847] rtl8192ce 0000:07:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
  23. [107479.712878] rtl8192ce 0000:07:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xd0200004)
  24. [107479.712893] rtl8192ce 0000:07:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
  25. [107479.712906] rtl8192ce 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  26. [107479.712921] rtl8192ce 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  27. [107479.713173] PM: early resume of devices complete after 30.904 msecs
  28. [107479.713388] radeon 0000:00:01.0: setting latency timer to 64
  29. [107479.713666] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  30. [107479.713742] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  31. [107479.713783] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  32. [107479.713898] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  33. [107479.713965] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  34. [107479.714038] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  35. [107479.714076] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  36. [107479.714132] Ready to resume
  37. [107479.714165] rts_pstor 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  38. [107479.714177] rts_pstor 0000:02:00.0: setting latency timer to 64
  39. [107479.714186] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  40. [107479.714241] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
  41. [107479.714253] r8169 0000:06:00.0: PME# disabled
  42. [107479.714542] rtl8192ce 0000:07:00.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  43. [107479.714558] rtlwifi: wireless switch is on
  44. [107479.715412] sd 0:0:0:0: [sda] Starting disk
  45. [107479.748202] radeon 0000:00:01.0: WB enabled
  46. [107479.764576] [drm] ring test succeeded in 1 usecs
  47. [107479.764607] [drm] ib test succeeded in 0 usecs
  48. [107479.821467] PM: resume of drv:hub dev:4-0:1.0 complete after 106.350 msecs
  49. [107479.821488] PM: resume of drv: dev:ep_00 complete after 106.299 msecs
  50. [107479.821500] PM: resume of drv:hub dev:5-0:1.0 complete after 106.230 msecs
  51. [107479.821517] PM: resume of drv: dev:ep_81 complete after 106.368 msecs
  52. [107479.821528] PM: resume of drv: dev:ep_81 complete after 106.217 msecs
  53. [107479.821557] PM: resume of drv: dev:ep_00 complete after 106.204 msecs
  54. [107479.821569] PM: resume of drv: dev:ep_00 complete after 106.544 msecs
  55. [107479.821581] PM: resume of drv:hub dev:3-0:1.0 complete after 106.640 msecs
  56. [107479.821598] PM: resume of drv: dev:ep_81 complete after 106.615 msecs
  57. [107479.901178] PM: resume of drv:r8169 dev:0000:06:00.0 complete after 186.942 msecs
  58. [107479.901321] PM: resume of drv:net dev:eth0 complete after 158.661 msecs
  59. [107479.916244] PM: resume of drv:rts_pstor dev:0000:02:00.0 complete after 202.100 msecs
  60. [107479.916282] PM: resume of drv:scsi dev:host2 complete after 200.727 msecs
  61. [107479.916304] PM: resume of drv:scsi_host dev:host2 complete after 200.709 msecs
  62. [107479.916318] PM: resume of drv:scsi dev:target2:0:0 complete after 200.683 msecs
  63. [107479.916347] PM: resume of drv:sd dev:2:0:0:0 complete after 200.668 msecs
  64. [107479.916364] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 200.644 msecs
  65. [107479.936294] usb 2-2: reset high speed USB device number 8 using ehci_hcd
  66. [107479.980285] PM: resume of drv:radeon dev:0000:00:01.0 complete after 266.910 msecs
  67. [107480.128238] PM: resume of drv:uvcvideo dev:2-2:1.1 complete after 412.343 msecs
  68. [107480.128258] PM: resume of drv: dev:ep_00 complete after 412.320 msecs
  69. [107480.128310] PM: resume of drv:uvcvideo dev:2-2:1.0 complete after 412.508 msecs
  70. [107480.128362] PM: resume of drv: dev:ep_83 complete after 412.518 msecs
  71. [107480.204292] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  72. [107480.210224] ata2.00: configured for UDMA/100
  73. [107481.832308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  74. [107481.836320] ata1.00: configured for UDMA/100
  75. [107481.869760] PM: resume of drv:sd dev:0:0:0:0 complete after 2154.340 msecs
  76. [107481.869905] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1968.558 msecs
  77. [107481.872224] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2156.716 msecs
  78. [107481.883140] PM: resume of devices complete after 2169.826 msecs
  79. [107481.883377] PM: resume devices took 2.168 seconds
  80. [107481.883470] PM: Finishing wakeup.
  81. [107481.883475] Restarting tasks ... done.
  82. [107481.955163] video LNXVIDEO:00: Restoring backlight state
  83. [107481.957926] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
  84. [107484.417092] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  85. [107484.436483] EXT4-fs (sda3): re-mounted. Opts: commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=0,commit=0
  86. [107484.719012] r8169 0000:06:00.0: eth0: link down
  87. [107484.719664] ADDRCONF(NETDEV_UP): eth0: link is not ready
  88. [107484.726869] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin
  89. [107485.176856] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  90. [107485.308546] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin
  91. [107487.319966] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin
  92. [107488.427737] wlan0: authenticate with 00:1a:70:d6:f1:ca (try 1)
  93. [107488.429604] wlan0: authenticated
  94. [107488.430142] wlan0: associate with 00:1a:70:d6:f1:ca (try 1)
  95. [107488.432574] wlan0: RX AssocResp from 00:1a:70:d6:f1:ca (capab=0x411 status=0 aid=2)
  96. [107488.432584] wlan0: associated
  97. [107488.433730] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  98. [107498.856231] wlan0: no IPv6 routers present
  99. [108888.113428] wlan0: deauthenticating from 00:1a:70:d6:f1:ca by local choice (reason=3)
  100. [108888.130911] cfg80211: All devices are disconnected, going to restore regulatory settings
  101. [108888.130933] cfg80211: Restoring regulatory settings
  102. [108888.130949] cfg80211: Calling CRDA to update world regulatory domain
  103. [108888.164889] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  104. [108888.164904] cfg80211: World regulatory domain updated:
  105. [108888.164910] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  106. [108888.164920] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  107. [108888.164929] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  108. [108888.164938] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  109. [108888.164946] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  110. [108888.164954] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  111. [108889.047094] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
  112. [108889.073733] EXT4-fs (sda3): re-mounted. Opts: commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=0,commit=0,commit=600
  113. [108889.945131] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  114. [108889.964246] EXT4-fs (sda3): re-mounted. Opts: commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=0,commit=0,commit=600,commit=0
  115. [108891.968366] PM: Syncing filesystems ... done.
  116. [108891.982591] PM: Preparing system for mem sleep
  117. [108892.303700] Freezing user space processes ... (elapsed 0.01 seconds) done.
  118. [108892.320363] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  119. [108892.336427] PM: Entering mem sleep
  120. [108892.336931] Suspending console(s) (use no_console_suspend to debug)
  121. [108892.352605] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  122. [108892.352870] sd 0:0:0:0: [sda] Stopping disk
  123. [108892.412126] rtl8192ce 0000:07:00.0: PCI INT A disabled
  124. [108892.412258] Ready to suspend
  125. [108892.412420] ohci_hcd 0000:00:16.0: PCI INT A disabled
  126. [108892.412630] ohci_hcd 0000:00:14.5: PCI INT C disabled
  127. [108892.412740] ehci_hcd 0000:00:12.2: PCI INT B disabled
  128. [108892.412758] ohci_hcd 0000:00:12.0: PCI INT A disabled
  129. [108892.428180] ehci_hcd 0000:00:16.2: PCI INT B disabled
  130. [108892.516182] HDA Intel 0000:00:14.2: PCI INT A disabled
  131. [108892.532076] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.372 msecs
  132. [108892.608051] PM: suspend of drv:radeon dev:0000:00:01.0 complete after 195.199 msecs
  133. [108892.939014] PM: suspend of drv:sd dev:0:0:0:0 complete after 586.420 msecs
  134. [108892.939048] PM: suspend of drv:scsi dev:target0:0:0 complete after 586.370 msecs
  135. [108892.939078] PM: suspend of drv:scsi dev:host0 complete after 585.838 msecs
  136. [108892.939288] ahci 0000:00:11.0: PCI INT A disabled
  137. [108892.939298] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 526.531 msecs
  138. [108893.412225] rts_pstor 0000:02:00.0: PCI INT A disabled
  139. [108893.428108] PM: suspend of drv:rts_pstor dev:0000:02:00.0 complete after 1015.852 msecs
  140. [108893.428167] PM: suspend of drv:pcieport dev:0000:00:15.0 complete after 1015.622 msecs
  141. [108893.428204] PM: suspend of drv: dev:pci0000:00 complete after 1015.251 msecs
  142. [108893.428228] PM: suspend of devices complete after 1075.883 msecs
  143. [108893.428236] PM: suspend devices took 1.092 seconds
  144. [108893.428701] r8169 0000:06:00.0: PME# enabled
  145. [108893.428724] pcieport 0000:00:15.1: wake-up capability enabled by ACPI
  146. [108893.476195] PM: late suspend of devices complete after 47.950 msecs
  147. [108893.476273] ACPI: Preparing to enter system sleep state S3
  148. [108893.478517] PM: Saving platform NVS memory
  149. [108893.498601] Disabling non-boot CPUs ...
  150. [108893.500314] CPU 1 is now offline
  151. [108893.500977] ACPI: Low-level resume complete
  152. [108893.500977] PM: Restoring platform NVS memory
  153. [108893.500977] Enabling non-boot CPUs ...
  154. [108893.500977] Booting Node 0 Processor 1 APIC 0x1
  155. [108893.500977] smpboot cpu 1: start_ip = 9b000
  156. [108893.500274] Initializing CPU#1
  157. [108893.613174] CPU1 is up
  158. [108893.616051] Switched to NOHz mode on CPU #1
  159. [108893.616992] ACPI: Waking up from system sleep state S3
  160. [108893.810394] radeon 0000:00:01.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  161. [108893.810425] radeon 0000:00:01.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
  162. [108893.810526] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
  163. [108893.810560] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)
  164. [108893.810590] ohci_hcd 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  165. [108893.824080] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xd0447000-0xd04470ff] (PCI address [0xd0447000-0xd04470ff])
  166. [108893.824105] ehci_hcd 0000:00:12.2: restoring config space at offset 0xf (was 0x200, writing 0x203)
  167. [108893.824139] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  168. [108893.824212] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x100, writing 0x104)
  169. [108893.824246] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
  170. [108893.824340] ohci_hcd 0000:00:14.5: restoring config space at offset 0xf (was 0x300, writing 0x30b)
  171. [108893.824651] ohci_hcd 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  172. [108893.840086] ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0xd0444000-0xd04440ff] (PCI address [0xd0444000-0xd04440ff])
  173. [108893.840110] ehci_hcd 0000:00:16.2: restoring config space at offset 0xf (was 0x200, writing 0x203)
  174. [108893.840144] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
  175. [108893.840437] rts_pstor 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
  176. [108893.840472] rts_pstor 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0300000)
  177. [108893.840484] rts_pstor 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  178. [108893.840499] rts_pstor 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  179. [108893.840571] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107)
  180. [108893.840597] r8169 0000:06:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd010000c)
  181. [108893.840611] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd010400c)
  182. [108893.840626] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
  183. [108893.840637] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  184. [108893.840652] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
  185. [108893.840760] rtl8192ce 0000:07:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
  186. [108893.840792] rtl8192ce 0000:07:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xd0200004)
  187. [108893.840807] rtl8192ce 0000:07:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
  188. [108893.840820] rtl8192ce 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  189. [108893.840835] rtl8192ce 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  190. [108893.841087] PM: early resume of devices complete after 30.810 msecs
  191. [108893.841299] radeon 0000:00:01.0: setting latency timer to 64
  192. [108893.841431] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  193. [108893.841512] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  194. [108893.841557] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  195. [108893.842020] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  196. [108893.842088] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  197. [108893.842159] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  198. [108893.842216] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  199. [108893.842274] Ready to resume
  200. [108893.842307] rts_pstor 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  201. [108893.842319] rts_pstor 0000:02:00.0: setting latency timer to 64
  202. [108893.842328] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  203. [108893.842381] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
  204. [108893.842393] r8169 0000:06:00.0: PME# disabled
  205. [108893.842716] rtl8192ce 0000:07:00.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  206. [108893.842732] rtlwifi: wireless switch is on
  207. [108893.843896] sd 0:0:0:0: [sda] Starting disk
  208. [108893.876261] radeon 0000:00:01.0: WB enabled
  209. [108893.892636] [drm] ring test succeeded in 1 usecs
  210. [108893.892666] [drm] ib test succeeded in 0 usecs
  211. [108893.944391] PM: resume of drv:hub dev:3-0:1.0 complete after 101.146 msecs
  212. [108893.944411] PM: resume of drv: dev:ep_00 complete after 101.059 msecs
  213. [108893.944424] PM: resume of drv: dev:ep_81 complete after 101.130 msecs
  214. [108894.029294] PM: resume of drv:r8169 dev:0000:06:00.0 complete after 186.916 msecs
  215. [108894.029424] PM: resume of drv:net dev:eth0 complete after 158.609 msecs
  216. [108894.044256] PM: resume of drv:rts_pstor dev:0000:02:00.0 complete after 201.970 msecs
  217. [108894.044375] PM: resume of drv:scsi dev:host2 complete after 200.252 msecs
  218. [108894.044503] PM: resume of drv:scsi dev:target2:0:0 complete after 200.260 msecs
  219. [108894.044540] PM: resume of drv:scsi_host dev:host2 complete after 200.366 msecs
  220. [108894.044651] PM: resume of drv:sd dev:2:0:0:0 complete after 200.348 msecs
  221. [108894.044771] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 200.411 msecs
  222. [108894.064346] usb 2-2: reset high speed USB device number 8 using ehci_hcd
  223. [108894.092480] PM: resume of drv:radeon dev:0000:00:01.0 complete after 251.195 msecs
  224. [108894.256400] PM: resume of drv: dev:ep_00 complete after 411.752 msecs
  225. [108894.256429] PM: resume of drv:uvcvideo dev:2-2:1.1 complete after 411.850 msecs
  226. [108894.256443] PM: resume of drv:uvcvideo dev:2-2:1.0 complete after 411.979 msecs
  227. [108894.256545] PM: resume of drv: dev:ep_83 complete after 412.013 msecs
  228. [108894.332275] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  229. [108894.338352] ata2.00: configured for UDMA/100
  230. [108895.956308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  231. [108895.960338] ata1.00: configured for UDMA/100
  232. [108895.997097] PM: resume of drv:sd dev:0:0:0:0 complete after 2153.193 msecs
  233. [108895.997243] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1967.793 msecs
  234. [108895.999760] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2155.757 msecs
  235. [108896.010232] PM: resume of devices complete after 2169.009 msecs
  236. [108896.010470] PM: resume devices took 2.168 seconds
  237. [108896.010562] PM: Finishing wakeup.
  238. [108896.010567] Restarting tasks ... done.
  239. [108896.115691] video LNXVIDEO:00: Restoring backlight state
  240. [108896.123420] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
  241. [108898.514813] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
  242. [108898.532236] EXT4-fs (sda3): re-mounted. Opts: commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600
  243. [108898.823172] r8169 0000:06:00.0: eth0: link down
  244. [108898.823958] ADDRCONF(NETDEV_UP): eth0: link is not ready
  245. [108898.834347] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin
  246. [108899.298844] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  247. [108901.092015] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin
  248. [108902.198992] wlan0: authenticate with 00:25:3c:23:0e:79 (try 1)
  249. [108902.205665] wlan0: authenticated
  250. [108902.229263] wlan0: associate with 00:25:3c:23:0e:79 (try 1)
  251. [108902.231745] wlan0: RX AssocResp from 00:25:3c:23:0e:79 (capab=0x431 status=0 aid=1)
  252. [108902.231757] wlan0: associated
  253. [108902.235811] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  254. [108902.236031] cfg80211: Calling CRDA for country: US
  255. [108902.269620] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  256. [108902.269635] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  257. [108902.269644] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  258. [108902.269653] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  259. [108902.269661] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  260. [108902.269669] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  261. [108902.269677] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  262. [108902.269685] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  263. [108902.269692] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  264. [108902.269701] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  265. [108902.269708] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  266. [108902.269716] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  267. [108902.269723] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  268. [108902.269731] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  269. [108902.269738] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  270. [108902.269746] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  271. [108902.269754] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  272. [108902.269762] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  273. [108902.269769] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  274. [108902.269777] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  275. [108902.269784] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  276. [108902.269793] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
  277. [108902.269799] cfg80211: Disabling freq 2467 MHz
  278. [108902.269804] cfg80211: Disabling freq 2472 MHz
  279. [108902.269809] cfg80211: Disabling freq 2484 MHz
  280. [108902.269823] cfg80211: Regulatory domain changed to country: US
  281. [108902.269829] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  282. [108902.269838] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  283. [108902.269846] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  284. [108902.269854] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  285. [108902.269862] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  286. [108902.269870] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  287. [108902.269878] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  288. [108912.384194] wlan0: no IPv6 routers present
  289. [108924.890169] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
  290. [108924.911598] EXT4-fs (sda3): re-mounted. Opts: commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=600,commit=0,commit=0,commit=0,commit=0,commit=600,commit=600,commit=0,commit=0,commit=0,commit=600,commit=0,commit=600,commit=0
  291. [109072.856296] usb 1-3: new high speed USB device number 13 using ehci_hcd
  292. [109072.993775] usb-storage 1-3:1.0: Quirks match for vid 152d pid 2329: 8020
  293. [109072.993969] scsi13 : usb-storage 1-3:1.0
  294. [109083.560751] scsi 13:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
  295. [109083.620844] sd 13:0:0:0: Attached scsi generic sg3 type 0
  296. [109083.625599] sd 13:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  297. [109083.625975] sd 13:0:0:0: [sdc] 72057594037927936 512-byte logical blocks: (0 B/0 B)
  298. [109083.626734] sd 13:0:0:0: [sdc] Write Protect is off
  299. [109083.626748] sd 13:0:0:0: [sdc] Mode Sense: 28 00 00 00
  300. [109083.627601] sd 13:0:0:0: [sdc] No Caching mode page present
  301. [109083.627614] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  302. [109083.629341] sd 13:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  303. [109083.631218] sd 13:0:0:0: [sdc] No Caching mode page present
  304. [109083.631231] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  305. [109083.631429]  sdc: unknown partition table
  306. [109083.633597] sd 13:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  307. [109083.635469] sd 13:0:0:0: [sdc] No Caching mode page present
  308. [109083.635483] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  309. [109083.635493] sd 13:0:0:0: [sdc] Attached SCSI disk
  310. [109232.736666] usb 1-3: USB disconnect, device number 13
  311. [109364.876254] usb 1-3: new high speed USB device number 14 using ehci_hcd
  312. [109365.012697] usb-storage 1-3:1.0: Quirks match for vid 152d pid 2329: 8020
  313. [109365.012792] scsi14 : usb-storage 1-3:1.0
  314. [109375.441090] scsi 14:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
  315. [109375.556613] sd 14:0:0:0: Attached scsi generic sg3 type 0
  316. [109375.561184] sd 14:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  317. [109375.561654] sd 14:0:0:0: [sdc] 72057594037927936 512-byte logical blocks: (0 B/0 B)
  318. [109375.562395] sd 14:0:0:0: [sdc] Write Protect is off
  319. [109375.562405] sd 14:0:0:0: [sdc] Mode Sense: 28 00 00 00
  320. [109375.563150] sd 14:0:0:0: [sdc] No Caching mode page present
  321. [109375.563160] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  322. [109375.564675] sd 14:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  323. [109375.569450] sd 14:0:0:0: [sdc] No Caching mode page present
  324. [109375.569465] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  325. [109375.569627]  sdc: unknown partition table
  326. [109375.571396] sd 14:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
  327. [109375.574396] sd 14:0:0:0: [sdc] No Caching mode page present
  328. [109375.574409] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  329. [109375.574418] sd 14:0:0:0: [sdc] Attached SCSI disk
  330. [109381.515136] usb 1-3: USB disconnect, device number 14
  331. [109383.692319] usb 1-3: new high speed USB device number 15 using ehci_hcd
  332. [109383.838239] usb-storage 1-3:1.0: Quirks match for vid 152d pid 2329: 8020
  333. [109383.838385] scsi15 : usb-storage 1-3:1.0


 
et hdparm -g
 

Code :
  1. /dev/sdc:
  2. geometry      = 1431923114/255/63, sectors = 72057594037927936, start = 0


 
Merci
 
Fish

Reply

Marsh Posté le 14-02-2012 à 08:38:25    

Cela reste le plus pratique en interne, et permettra d'être sûr ;)


---------------
Logiciels Automatisés, Mises à jour et paramétrages de Windows automatisés, Logiciels maisons et tutoriels
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed