enlever du ventirad d'origine, "le thermal phase pad" si artic silver

enlever du ventirad d'origine, "le thermal phase pad" si artic silver - Carte mère - Hardware

Marsh Posté le 22-03-2003 à 13:02:36    


NOTE: The bottom of the HSF that ships with the boxed Pentium 4 comes with a thermal phase change pad installed. If you wish to use a more effective thermal interface such as Arctic Silver thermal compound then you will need to first remove the pad from the heatsink. The pad is most easily removed by using a combination of isopropyl alcohol and a flat dull object such as a old credit card. Be careful not to scratch the bottom of the heatsink too badly when removing the pad as this will decrease the thermal transfer effectiveness
 
 
si je lis bien  faut bien enlver la petite languette derriere le ventirad d'origine (intel) si on utilise del'artic silver a la place
 
c'est ca ?
 
merci
 

Reply

Marsh Posté le 22-03-2003 à 13:02:36   

Reply

Marsh Posté le 22-03-2003 à 13:07:46    

Reply

Marsh Posté le 22-03-2003 à 13:18:18    

y a quelqu'un qui a installé un p4 avec de l'artic silver ici ?
 
 :cry:

Reply

Marsh Posté le 22-03-2003 à 13:43:24    

Tu sais le multipost est pas vraiment accepté ici, pour la reponse va voir tes 2 autres posts :/

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed