Basse résolution avec une Asus P5K-VM

Basse résolution avec une Asus P5K-VM - Carte mère - Hardware

Marsh Posté le 27-10-2007 à 19:10:28    

Bonjour,
 
J'ai installé une P5K-VM (chipset G33/ICH9) sous Debian AMD64 (Lenny), noyau 2.6.22. J'utilise la vidéo intégrée mais je n'arrive à atteindre qu'une seule résolution pour mon écran : 1024x768. C'est un Viewsonic P95f (1920x1440, 77Hz). Sauriez-vous me dire d'où peut venir le pb ?
Même sans indiquer la moindre fréquence horizontale ou verticale, j'ai ça dans les logs :

Code :
  1. (II) intel(0): Output VGA disconnected
  2. (II) intel(0): EDID for output VGA
  3. (II) intel(0): Output VGA-1 connected
  4. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
  5. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" removed.
  6. (II) intel(0): EDID for output VGA-1
  7. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
  8. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
  9. (II) intel(0): EDID for output VGA
  11. (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
  12. (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
  13. (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
  14. (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
  15. (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
  16. (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
  17. (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
  18. (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
  19. (II) intel(0): Not using default mode "832x624" (vrefresh out of range)
  20. (II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
  21. (II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
  22. (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
  23. (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
  24. (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
  25. (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
  26. (II) intel(0): Not using default mode "1440x900" (hsync out of range)
  27. (II) intel(0): Not using default mode "1600x1024" (hsync out of range)
  28. (II) intel(0): Not using default mode "1680x1050" (hsync out of range)
  29. (II) intel(0): Not using default mode "1920x1200" (hsync out of range)
  30. (II) intel(0): Not using default mode "1920x1200" (vrefresh out of range)
  31. (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
  32. (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
  33. (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
  34. (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
  35. (II) intel(0): Printing probed modes for output VGA-1
  36. (II) intel(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 (49.7 kHz)
  37. (II) intel(0): Modeline "1280x768"x60.0   80.14  1280 1344 1480 1680  768 769 772 795 (47.7 kHz)
  38. (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
  39. (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
  40. (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
  41. (II) intel(0): Output VGA disconnected
  42. (II) intel(0): Output VGA-1 connected
  43. (II) intel(0): Output VGA-1 using initial mode 1280x768


 
Sauriez-vous me dire d'où peut venir le pb ? Merci ;)


Message édité par bluenotee le 27-10-2007 à 19:11:03
Reply

Marsh Posté le 27-10-2007 à 19:10:28   

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed