LG 4163b et K3b ....

LG 4163b et K3b .... - Hardware - Linux et OS Alternatifs

Marsh Posté le 23-05-2007 à 11:05:17    

bonjour,
mon graveur 4163b ne veut plus graver les cd rw  :pfff:  
j'ai ces dernier temps grave grace a lui des dvd ( R et RW ) .
k3b me "jette" ce message :
 
System
-----------------------
K3b Version: 1.0.1svn
 
KDE Version: 3.5.6
QT Version:  3.3.8
Kernel:      2.6.17-13mdv
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4163B A106 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R séquentiel, DVD-RAM, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Réinscription restreinte]
 
K3bIsoImager
-----------------------
mkisofs print size result: 32817 (67209216 bytes)
Pipe throughput: 50842624 bytes read, 50838336 bytes written.
 
Used versions
-----------------------
mkisofs: 1.1.2
cdrecord: 1.1.2
 
cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :  
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4163B'
Revision       : 'A106'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)  
Profile: 0x0011 (DVD-R sequential recording)  
Profile: 0x0014 (DVD-RW sequential recording)  
Profile: 0x0013 (DVD-RW restricted overwrite)  
Profile: 0x001A (DVD+RW)  
Profile: 0x001B (DVD+R)  
Profile: 0x002B (DVD+R/DL)  
Profile: 0x0010 (DVD-ROM)  
Profile: 0x0009 (CD-R)  
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)  
Profile: 0x0002 (Removable disk)  
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE  
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13963 kB/s 79x CD 10x DVD
FIFO size      : 52428800 = 51200 KB
Speed set to 1764 KB/s
Track 01: data    64 MB        
Total size:       73 MB (07:17.56) = 32817 sectors
Lout start:       73 MB (07:19/42) = 32817 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 327032
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 0 (Success), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 10 3C 30 00 90 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)  
resid: 63488
cmd finished after 22.634s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of   64 MB written.
Errno: 0 (Success), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)  
resid: 63488
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   27.701s
Average write speed  15.8x.
Fixating...
Fixating time:    0.004s
 
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdd speed=10 -dao driveropts=burnfree -eject fs=50m -data -tsize=32817s -  
 
mkisofs
-----------------------
32817
I: -input-charset not specified, using utf-8 (detected in locale settings)
  1.57% done, estimate finish Wed May 23 10:39:26 2007
  3.08% done, estimate finish Wed May 23 10:39:26 2007
  4.59% done, estimate finish Wed May 23 10:39:26 2007
  6.10% done, estimate finish Wed May 23 10:39:26 2007
  7.66% done, estimate finish Wed May 23 10:39:26 2007
  9.18% done, estimate finish Wed May 23 10:39:26 2007
 10.70% done, estimate finish Wed May 23 10:39:26 2007
 12.21% done, estimate finish Wed May 23 10:39:26 2007
 13.73% done, estimate finish Wed May 23 10:39:33 2007
 15.25% done, estimate finish Wed May 23 10:39:32 2007
 16.81% done, estimate finish Wed May 23 10:39:31 2007
 18.32% done, estimate finish Wed May 23 10:39:31 2007
 19.83% done, estimate finish Wed May 23 10:39:31 2007
 21.34% done, estimate finish Wed May 23 10:39:30 2007
 22.85% done, estimate finish Wed May 23 10:39:30 2007
 24.41% done, estimate finish Wed May 23 10:39:30 2007
 25.92% done, estimate finish Wed May 23 10:39:29 2007
 27.43% done, estimate finish Wed May 23 10:39:29 2007
 28.99% done, estimate finish Wed May 23 10:39:29 2007
 30.50% done, estimate finish Wed May 23 10:39:29 2007
 32.01% done, estimate finish Wed May 23 10:39:29 2007
 33.53% done, estimate finish Wed May 23 10:39:28 2007
 35.09% done, estimate finish Wed May 23 10:39:28 2007
 36.60% done, estimate finish Wed May 23 10:39:28 2007
 38.10% done, estimate finish Wed May 23 10:39:28 2007
 39.66% done, estimate finish Wed May 23 10:39:28 2007
 41.17% done, estimate finish Wed May 23 10:39:28 2007
 42.67% done, estimate finish Wed May 23 10:39:28 2007
 44.23% done, estimate finish Wed May 23 10:39:28 2007
 45.74% done, estimate finish Wed May 23 10:39:28 2007
 47.25% done, estimate finish Wed May 23 10:39:28 2007
 48.79% done, estimate finish Wed May 23 10:39:28 2007
 50.31% done, estimate finish Wed May 23 10:39:27 2007
 51.82% done, estimate finish Wed May 23 10:39:27 2007
 53.35% done, estimate finish Wed May 23 10:39:29 2007
 54.86% done, estimate finish Wed May 23 10:39:29 2007
 56.38% done, estimate finish Wed May 23 10:39:29 2007
 57.91% done, estimate finish Wed May 23 10:39:29 2007
 59.42% done, estimate finish Wed May 23 10:39:29 2007
 60.98% done, estimate finish Wed May 23 10:39:29 2007
 62.50% done, estimate finish Wed May 23 10:39:29 2007
 64.00% done, estimate finish Wed May 23 10:39:29 2007
 65.51% done, estimate finish Wed May 23 10:39:29 2007
 67.07% done, estimate finish Wed May 23 10:39:28 2007
 68.59% done, estimate finish Wed May 23 10:39:28 2007
 70.10% done, estimate finish Wed May 23 10:39:28 2007
 71.61% done, estimate finish Wed May 23 10:39:28 2007
 73.18% done, estimate finish Wed May 23 10:39:28 2007
 74.69% done, estimate finish Wed May 23 10:39:28 2007
 
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid a tirer -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -abstract  -copyright  -biblio  -volset-size 1 -volset-seqno 1 -sort /home/patrick/tmp/kde-patrick/k3bRJdJxb.tmp -rational-rock -hide-list /home/patrick/tmp/kde-patrick/k3bw8tVac.tmp -joliet -joliet-long -hide-joliet-list /home/patrick/tmp/kde-patrick/k3bRhKYxb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /home/patrick/tmp/kde-patrick/k3b1CmPcb.tmp  
 
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid a tirer -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -abstract  -copyright  -biblio  -volset-size 1 -volset-seqno 1 -sort /home/patrick/tmp/kde-patrick/k3bsOiLBb.tmp -rational-rock -hide-list /home/patrick/tmp/kde-patrick/k3b5aketc.tmp -joliet -joliet-long -hide-joliet-list /home/patrick/tmp/kde-patrick/k3bofjlAa.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /home/patrick/tmp/kde-patrick/k3bytcakb.tmp  
 
********************************************************************************************************************************************************
brasero lui aussi :(
 
imager (BraseroLocalImage) set_output
job (BraseroLocalImage) set_task
imager (BraseroLocalImage) get_track
job (BraseroLocalImage) set_task
Session starting:
 flags   = 16759  
 media type = 0
 speed  = 2
 track type  = 6
 track format = 3
 output  = none
job (BraseroMkisofs) set_source
imager (BraseroMkisofs) set_output_type
imager (BraseroMkisofs) set_output
job (BraseroMkisofs) set_task
imager (BraseroMkisofs) get_size
process (BraseroMkisofs) getting varg
mkisofs (BraseroMkisofs) set_action
mkisofs (BraseroMkisofs) start_progress
process (BraseroMkisofs) got varg:
 mkisofs
 -input-charset
 utf8
 -r
 -J
 -graft-points
 -D
 -path-list
 /home/patrick/tmp/brasero_tmp_kGo9nA/brasero_tmp_0OWQST
 -exclude-list
 /home/patrick/tmp/brasero_tmp_kGo9nA/brasero_tmp_CMWQST
 -quiet
 -print-size
process (BraseroMkisofs) launching command
process (BraseroMkisofs) stdout: 32817
process (BraseroMkisofs) stderr: HUP
process (BraseroMkisofs) stdout: HUP
job (BraseroMkisofs) asked to stop
 status = 0
iter (BraseroMkisofs) stopping
process (BraseroMkisofs) got killed
iter (BraseroMkisofs) stopped
job (BraseroMkisofs) got out of loop
job (BraseroMkisofs) set_task
imager (BraseroMkisofs) get_track_type
job (BraseroCDRecord) set_rate
recorder (BraseroCDRecord) set_drive
recorder (BraseroCDRecord) set_flags
job (BraseroCDRecord) set_source
job (BraseroCDRecord) set_task
recorder (BraseroCDRecord) record
process (BraseroCDRecord) getting varg
imager (BraseroMkisofs) get_track_type
imager (BraseroMkisofs) get_size
cdrecord (BraseroCDRecord) set_action
process (BraseroCDRecord) got varg:
 cdrecord
 -v
 dev=/dev/hdd
 gracetime=0
 speed=2
 driveropts=burnfree
 fs=4m
 tsize=32817s
 -dao
 -data
 -nopad
 -
process (BraseroMkisofs) getting varg
process (BraseroMkisofs) got varg:
 mkisofs
 -input-charset
 utf8
 -r
 -J
 -graft-points
 -D
 -path-list
 /home/patrick/tmp/brasero_tmp_kGo9nA/brasero_tmp_0OWQST
 -exclude-list
 /home/patrick/tmp/brasero_tmp_kGo9nA/brasero_tmp_CMWQST
 -V
 Disque de données (23 mai 07)
 -A
 Brasero-0.5.2
 -sysid
 LINUX
process (BraseroMkisofs) launching command
process (BraseroCDRecord) launching command
process (BraseroCDRecord) stderr: scsidev: '/dev/hdd'
process (BraseroCDRecord) stderr: devname: '/dev/hdd'
process (BraseroCDRecord) stderr: scsibus: -2 target: -2 lun: -2
process (BraseroCDRecord) stderr: Linux sg driver version: 3.5.27
process (BraseroCDRecord) stderr: Wodim version: 1.1.2
process (BraseroCDRecord) stderr: SCSI buffer size: 64512
process (BraseroCDRecord) stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
process (BraseroCDRecord) stderr: communication breaks or freezes immediately after that.
process (BraseroCDRecord) stdout: TOC Type: 1 = CD-ROM
process (BraseroCDRecord) stderr: Speed set to 1764 KB/s
process (BraseroCDRecord) stdout: Driveropts: 'burnfree'
process (BraseroCDRecord) stdout: atapi: 1
process (BraseroCDRecord) stdout: Device type    : Removable CD-ROM
process (BraseroCDRecord) stdout: Version        : 0
process (BraseroCDRecord) stdout: Response Format: 2
process (BraseroCDRecord) stdout: Capabilities   :  
process (BraseroCDRecord) stdout: Vendor_info    : 'HL-DT-ST'
process (BraseroCDRecord) stdout: Identification : 'DVDRAM GSA-4163B'
process (BraseroCDRecord) stdout: Revision       : 'A106'
process (BraseroCDRecord) stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
process (BraseroCDRecord) stdout: Current: 0x000A (CD-RW)
process (BraseroCDRecord) stdout: Profile: 0x0012 (DVD-RAM)  
process (BraseroCDRecord) stdout: Profile: 0x0011 (DVD-R sequential recording)  
process (BraseroCDRecord) stdout: Profile: 0x0014 (DVD-RW sequential recording)  
process (BraseroCDRecord) stdout: Profile: 0x0013 (DVD-RW restricted overwrite)  
process (BraseroCDRecord) stdout: Profile: 0x001A (DVD+RW)  
process (BraseroCDRecord) stdout: Profile: 0x001B (DVD+R)  
process (BraseroCDRecord) stdout: Profile: 0x002B (DVD+R/DL)  
process (BraseroCDRecord) stdout: Profile: 0x0010 (DVD-ROM)  
process (BraseroCDRecord) stdout: Profile: 0x0009 (CD-R)  
process (BraseroCDRecord) stdout: Profile: 0x000A (CD-RW) (current)
process (BraseroCDRecord) stdout: Profile: 0x0008 (CD-ROM)  
process (BraseroCDRecord) stdout: Profile: 0x0002 (Removable disk)  
process (BraseroCDRecord) stdout: Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
process (BraseroCDRecord) stdout: Driver flags   : MMC-3 SWABAUDIO BURNFREE  
process (BraseroCDRecord) stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
process (BraseroCDRecord) stdout: Drive buf size : 1053696 = 1029 KB
process (BraseroCDRecord) stdout: Drive DMA Speed: 13696 kB/s 77x CD 9x DVD
process (BraseroCDRecord) stdout: FIFO size      : 4194304 = 4096 KB
process (BraseroCDRecord) stdout: Track 01: data    64 MB        
process (BraseroCDRecord) stdout: Total size:       73 MB (07:17.56) = 32817 sectors
process (BraseroCDRecord) stdout: Lout start:       73 MB (07:19/42) = 32817 sectors
process (BraseroCDRecord) stdout: Current Secsize: 2048
process (BraseroCDRecord) stdout: ATIP info from disk:
process (BraseroCDRecord) stdout:   Indicated writing power: 2
process (BraseroCDRecord) stdout:   Reference speed: 6
process (BraseroCDRecord) stdout:   Is not unrestricted
process (BraseroCDRecord) stdout:   Is erasable
process (BraseroCDRecord) stdout:   Disk sub type: High speed Rewritable (CAV) media (1)
process (BraseroCDRecord) stdout:   ATIP start of lead in:  -11077 (97:34/23)
process (BraseroCDRecord) stdout:   ATIP start of lead out: 359849 (79:59/74)
process (BraseroCDRecord) stdout:   1T speed low:  4 1T speed high: 10
process (BraseroCDRecord) stdout:   2T speed low:  2 2T speed high: 10
process (BraseroCDRecord) stdout:   power mult factor: 2 6
process (BraseroCDRecord) stdout:   recommended erase/write power: 5
process (BraseroCDRecord) stdout:   A1 values: 24 2C DC
process (BraseroCDRecord) stdout:   A2 values: 14 A4 4A
process (BraseroCDRecord) stdout:   A3 values: 04 C4 80
process (BraseroCDRecord) stdout: Disk type:    Phase change
process (BraseroCDRecord) stdout: Manuf. index: 11
process (BraseroCDRecord) stdout: Manufacturer: Mitsubishi Chemical Corporation
process (BraseroCDRecord) stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 327032
process (BraseroCDRecord) stdout: Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
process (BraseroCDRecord) stdout: Last chance to quit, starting real write in 0 seconds. Operation starts.
process (BraseroCDRecord) stdout: Waiting for reader process to fill input buffer ... input buffer ready.
process (BraseroCDRecord) stdout: Performing OPC...
process (BraseroCDRecord) stdout: Sending CUE sheet...
imager (BraseroMkisofs) get_track_type
process (BraseroCDRecord) set_action
process (BraseroCDRecord) stderr: Errno: 0 (Success), write_g1 scsi sendcmd: no error
process (BraseroCDRecord) stderr: CDB:  2A 00 FF FF FF 6A 00 00 1F 00
process (BraseroCDRecord) stdout: Writing pregap for track 1 at -150
process (BraseroCDRecord) stderr: status: 0x2 (CHECK CONDITION)
process (BraseroCDRecord) stdout: write track pad data: error after 0 bytes
process (BraseroCDRecord) stderr: Sense Bytes: 70 00 03 00 00 00 00 10 3C 30 00 90 02 00 00 00
process (BraseroCDRecord) stdout: BFree: 1029 K BSize: 1029 K
process (BraseroCDRecord) stderr: Sense Key: 0x3 Medium Error, Segment 0
process (BraseroCDRecord) stdout: Starting new track at sector: 0
process (BraseroCDRecord) stderr: Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
process (BraseroCDRecord) stdout:  
process (BraseroCDRecord) stderr: Sense flags: Blk 0 (not valid)  
process (BraseroCDRecord) stderr: resid: 63488
process (BraseroCDRecord) stderr: cmd finished after 14.277s timeout 200s
process (BraseroCDRecord) stderr: Errno: 0 (Success), write_g1 scsi sendcmd: no error
process (BraseroCDRecord) stderr: CDB:  2A 00 00 00 00 00 00 00 1F 00
process (BraseroCDRecord) stderr: status: 0x2 (CHECK CONDITION)
process (BraseroCDRecord) stderr: Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
process (BraseroCDRecord) stderr: Sense Key: 0x5 Illegal Request, Segment 0
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroMkisofs) stopping
process (BraseroMkisofs) got killed
iter (BraseroMkisofs) stopped
iter (BraseroCDRecord) stopping
process (BraseroCDRecord) got killed
process (BraseroCDRecord) stdout: Track 01:    0 of   64 MB written.
 
process (BraseroCDRecord) stdout: write track data: error after 0 bytes
process (BraseroCDRecord) stdout: Writing  time:   19.343s
process (BraseroCDRecord) stdout: Average write speed  22.7x.
process (BraseroCDRecord) stdout: Fixating...
process (BraseroCDRecord) set_action
process (BraseroCDRecord) stdout: Fixating time:    0.004s
process (BraseroCDRecord) stdout: EOF
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0Sense flags: Blk 0 (not valid)  
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroCDRecord) stopping
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0Sense flags: Blk 0 (not valid) resid: 63488
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroCDRecord) stopping
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0Sense flags: Blk 0 (not valid) resid: 63488cmd finished after 0.002s timeout 200s
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroCDRecord) stopping
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0Sense flags: Blk 0 (not valid) resid: 63488cmd finished after 0.002s timeout 200swodim: A write error occured.
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroCDRecord) stopping
process (BraseroCDRecord) stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0Sense flags: Blk 0 (not valid) resid: 63488cmd finished after 0.002s timeout 200swodim: A write error occured.wodim: Please properly read the error message above.
job (BraseroCDRecord) asked to stop
 status = 1
 error  = 5
 message = "L'image ne semble pas être au format iso9660"
iter (BraseroCDRecord) stopping
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
iter (BraseroCDRecord) stopped
job (BraseroCDRecord) got out of loop
job (BraseroCDRecord) set_task
Session error : L'image ne semble pas être au format iso9660
 
 
 
c'est quoi ces histoire de format ?  
merci .
 

Reply

Marsh Posté le 23-05-2007 à 11:05:17   

Reply

Marsh Posté le 23-05-2007 à 11:14:13    

Il semble dire que toi tu vois une iso, mais que pour lui, c'en est pas une.
 
Essaies de la monter, voir.
De tete:
mount t -o loop /chemin/vers/mon/image.iso /mon/point/de/montage


---------------
Décentralisons Internet-Bépo-Troll Bingo - "Pour adoucir le mélange, pressez trois quartiers d’orange !"
Reply

Marsh Posté le 23-05-2007 à 11:21:47    

justement ce n'est pas un fichier iso .
un dossier , avec des photos . incomprensible .

Reply

Marsh Posté le 23-05-2007 à 11:39:00    

stderr: Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0


 
Tu serais pas entrain d'essayer de graver un cd low speed sur un graveur hi speed ou vice versa ?

Reply

Marsh Posté le 23-05-2007 à 12:13:35    

tech graveur :
 
Type de support : DVD+R DL(4x), DVD+R/RW (16x/8x), DVD-R/RW (16x/6x), DVD-RAM (5x), CD-R/RW (40x/24x)  
 
je viens de racheter des verbatim hi speed 8x 12x .
avec k3b j'ai mis vitesse auto .
avec Brasero j'ai demande 2 x .

Reply

Marsh Posté le 23-05-2007 à 14:11:31    

bah donne ça aux gens de k3b

Reply

Marsh Posté le 23-05-2007 à 16:44:42    

bizzare, je suis alle sous "fenetre" et ca me fait pareil .
il y a deux lazers dans un graveur cd / dvd non ?
pour lire et ecrire ? un serait en panne ? j'essaie de comprendre  :lol:  

Reply

Marsh Posté le 23-05-2007 à 22:02:51    

si quelqu un sait comment ca fonctionne :)
deux tetes de lecture + deux lasers pour graver ?
les cdr se lisent sans problemes .

Reply

Marsh Posté le 12-09-2007 à 09:39:35    

up ..

Reply

Marsh Posté le 13-09-2007 à 17:32:24    

oui tout a fait il y a deux lasers un pour les dvd et un pour les cd en effet sur les graveurs combo, la densité de stockage n'étant pas la même les deux lasers n'ont pas la même longueur d'onde (couleur), de plus la puissance n'est pas la même car pour graver il faut plus de puissance (désolé, je ne retrouve plus le lien la dessus).

 

edit par exemple c'est expliqué ici http://www.instructables.com/id/EW [...] /?ALLSTEPS
ps : je déconseille formellement ce hack matériel en raison des risques.


Message édité par enfoiro le 13-09-2007 à 17:35:18
Reply

Marsh Posté le 13-09-2007 à 17:32:24   

Reply

Marsh Posté le 13-09-2007 à 17:35:07    

merci . pas grave pour le lien . je dois donc avoir un lazer HS .

Reply

Marsh Posté le 13-09-2007 à 17:35:57    

j'ai retrouvé le lien ;)

Reply

Marsh Posté le 13-09-2007 à 17:37:10    

je veux bien alors .......

Reply

Marsh Posté le 13-09-2007 à 19:33:03    

regarde plus haut, message édité ;)

Reply

Marsh Posté le 13-09-2007 à 20:22:38    

merci

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed