[usb mass storage] pas de sda1 sous 2.6 :'(

pas de sda1 sous 2.6 :'( [usb mass storage] - Hardware - Linux et OS Alternatifs

Marsh Posté le 18-12-2003 à 02:54:47    

salut
depuis que je suis passé en kernel 2.6 je ne peux plus monter mon lecteur mp3 comme je faisais avant avec le bon vieux /dev/sda1 :/

Code :
  1. root@shuttle block # cat /proc/scsi/scsi
  2. Attached devices:
  3. Host: scsi0 Channel: 00 Id: 00 Lun: 00
  4.   Vendor: LITE-ON  Model: LTR-48246K       Rev: SKS7
  5.   Type:   CD-ROM                           ANSI SCSI revision: 02
  6. Host: scsi3 Channel: 00 Id: 00 Lun: 00
  7.   Vendor: iRiver   Model: iFP Mass Driver  Rev: 1.00
  8.   Type:   Direct-Access                    ANSI SCSI revision: 02
  9. root@shuttle block #


 
j'ai pourtant il me semble fait tout ce qu'il fallait, je vous donne quelques infos au cas ou vous auriez une soluce :)
 
en débranchant le machin:

Code :
  1. ehci_hcd 0000:00:02.2: GetStatus port 3 status 001002 POWER sig=se0  CSC
  2. hub 1-0:1.0: port 3, status 100, change 1, 12 Mb/s
  3. ehci_hcd 0000:00:02.2: GetStatus port 4 status 003802 POWER OWNER sig=j  CSC
  4. hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s
  5. ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS
  6. hub 3-0:1.0: port 1, status 100, change 3, 12 Mb/s
  7. usb 3-1: USB disconnect, address 3
  8. usb 3-1: usb_disable_device nuking all URBs
  9. usb 3-1: unregistering interface 3-1:1.0
  10. usb-storage: storage_disconnect() called
  11. usb-storage: usb_stor_stop_transport called
  12. usb-storage: -- dissociate_dev
  13. usb-storage: -- sending exit command to thread
  14. usb-storage: *** thread awakened.
  15. usb-storage: -- exit command received
  16. usb-storage: -- usb_stor_release_resources finished
  17. drivers/usb/core/usb.c: usb_hotplug
  18. usb 3-1: unregistering device
  19. drivers/usb/core/usb.c: usb_hotplug
  20. ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00020100 PESC PPS
  21. hub 3-0:1.0: port 1 enable change, status 100
  22. kpoman@shuttle kpoman $


 
 
en le rebranchant:

Code :
  1. (...)
  3. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
  4. usb-storage:  1e 00 00 00 00 00
  5. usb-storage: Bulk Command S 0x43425355 T 0x40 L 0 F 0 Trg 0 LUN 0 CL 6
  6. usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
  7. usb-storage: Status code 0; transferred 31/31
  8. usb-storage: -- transfer complete
  9. usb-storage: Bulk command transfer result=0
  10. usb-storage: Attempting to get CSW...
  11. usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
  12. usb-storage: Status code 0; transferred 13/13
  13. usb-storage: -- transfer complete
  14. usb-storage: Bulk status result = 0
  15. usb-storage: Bulk Status S 0x53425355 T 0x40 R 0 Stat 0x1
  16. usb-storage: -- transport indicates command failure
  17. usb-storage: Issuing auto-REQUEST_SENSE
  18. usb-storage: Bulk Command S 0x43425355 T 0x80000040 L 18 F 128 Trg 0 LUN 0 CL 6
  19. usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
  20. usb-storage: Status code 0; transferred 31/31
  21. usb-storage: -- transfer complete
  22. usb-storage: Bulk command transfer result=0
  23. usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
  24. usb-storage: Status code 0; transferred 18/18
  25. usb-storage: -- transfer complete
  26. usb-storage: Bulk data transfer result 0x0
  27. usb-storage: Attempting to get CSW...
  28. usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
  29. usb-storage: Status code 0; transferred 13/13
  30. usb-storage: -- transfer complete
  31. usb-storage: Bulk status result = 0
  32. usb-storage: Bulk Status S 0x53425355 T 0x80000040 R 0 Stat 0x0
  33. usb-storage: -- Result from auto-sense is 0
  34. usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
  35. usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
  36. usb-storage: scsi cmd done, result=0x2
  37. usb-storage: *** thread sleeping.
  38. Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
  39. Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0,  type 0
  40. usb-storage: queuecommand called
  41. usb-storage: *** thread awakened.
  42. usb-storage: Bad LUN (0:1)
  43. usb-storage: scsi cmd done, result=0x40000
  44. usb-storage: *** thread sleeping.
  45. usb-storage: queuecommand called
  46. usb-storage: *** thread awakened.
  47. usb-storage: Bad target number (1:0)
  48. usb-storage: scsi cmd done, result=0x40000
  49. usb-storage: *** thread sleeping.
  50. usb-storage: queuecommand called
  51. usb-storage: *** thread awakened.
  52. usb-storage: Bad target number (2:0)
  53. usb-storage: scsi cmd done, result=0x40000
  54. usb-storage: *** thread sleeping.
  55. usb-storage: queuecommand called
  56. usb-storage: *** thread awakened.
  57. usb-storage: Bad target number (3:0)
  58. usb-storage: scsi cmd done, result=0x40000
  59. usb-storage: *** thread sleeping.
  60. usb-storage: queuecommand called
  61. usb-storage: *** thread awakened.
  62. usb-storage: Bad target number (4:0)
  63. usb-storage: scsi cmd done, result=0x40000
  64. usb-storage: *** thread sleeping.
  65. usb-storage: queuecommand called
  66. usb-storage: *** thread awakened.
  67. usb-storage: Bad target number (5:0)
  68. usb-storage: scsi cmd done, result=0x40000
  69. usb-storage: *** thread sleeping.
  70. usb-storage: queuecommand called
  71. usb-storage: *** thread awakened.
  72. usb-storage: Bad target number (6:0)
  73. usb-storage: scsi cmd done, result=0x40000
  74. usb-storage: *** thread sleeping.
  75. usb-storage: queuecommand called
  76. usb-storage: *** thread awakened.
  77. usb-storage: Bad target number (7:0)
  78. usb-storage: scsi cmd done, result=0x40000
  79. usb-storage: *** thread sleeping.
  80. WARNING: USB Mass Storage data integrity not assured
  81. USB Mass Storage device found at 4
  82. kpoman@shuttle kpoman $


 
juste pour voir:

Code :
  1. root@shuttle block # pwd
  2. /sys/block
  3. root@shuttle block # ll
  4. total 0
  5. drwxr-xr-x    5 root     root            0 Dec 18 02:44 .
  6. drwxr-xr-x    9 root     root            0 Dec 18 02:44 ..
  7. drwxr-xr-x   10 root     root            0 Dec 18 02:44 hda
  8. drwxr-xr-x    3 root     root            0 Dec 18 02:55 sda
  9. drwxr-xr-x    3 root     root            0 Dec 18 02:44 sr0
  10. root@shuttle block #


 
 

Code :
  1. root@shuttle block # cdrecord -scanbus
  2. Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
  3. Linux sg driver version: 3.5.29
  4. Using libscg version 'schily-0.7'
  5. scsibus0:
  6.         0,0,0     0) 'LITE-ON ' 'LTR-48246K      ' 'SKS7' Removable CD-ROM
  7.         0,1,0     1) *
  8.         0,2,0     2) *
  9.         0,3,0     3) *
  10.         0,4,0     4) *
  11.         0,5,0     5) *
  12.         0,6,0     6) *
  13.         0,7,0     7) *
  14. scsibus2:
  15.         2,0,0   200) 'iRiver  ' 'iFP Mass Driver ' '1.00' Removable Disk
  16.         2,1,0   201) *
  17.         2,2,0   202) *
  18.         2,3,0   203) *
  19.         2,4,0   204) *
  20.         2,5,0   205) *
  21.         2,6,0   206) *
  22.         2,7,0   207) *
  23. root@shuttle block #


 

Code :
  1. root@shuttle block # find /dev/s*
  2. /dev/scsi
  3. /dev/scsi/host0
  4. /dev/scsi/host0/bus0
  5. /dev/scsi/host0/bus0/target0
  6. /dev/scsi/host0/bus0/target0/lun0
  7. /dev/scsi/host0/bus0/target0/lun0/cd
  8. /dev/scsi/host0/bus0/target0/lun0/generic
  9. /dev/scsi/host1
  10. /dev/scsi/host1/bus0
  11. /dev/scsi/host1/bus0/target0
  12. /dev/scsi/host2
  13. /dev/scsi/host2/bus0
  14. /dev/scsi/host2/bus0/target0
  15. /dev/scsi/host2/bus0/target0/lun0
  16. /dev/scsi/host2/bus0/target0/lun0/disc
  17. /dev/scsi/host2/bus0/target0/lun0/generic
  18. /dev/sd
  19. /dev/sd/c2b0t0u0
  20. /dev/sda
  21. /dev/sequencer
  22. /dev/sequencer2
  23. /dev/sg
  24. /dev/sg/c0b0t0u0
  25. /dev/sg/c2b0t0u0
  26. /dev/sg0
  27. /dev/sg1
  28. /dev/shm
  29. /dev/snd
  30. /dev/snd/controlC0
  31. /dev/snd/timer
  32. /dev/snd/seq
  33. /dev/snd/pcmC0D1p
  34. /dev/snd/pcmC0D0p
  35. /dev/snd/pcmC0D0c
  36. /dev/sound
  37. /dev/sound/sequencer
  38. /dev/sound/sequencer2
  39. /dev/sound/adsp
  40. /dev/sound/dsp
  41. /dev/sound/audio
  42. /dev/sound/mixer
  43. /dev/sr
  44. /dev/sr/c0b0t0u0
  45. /dev/sr0
  46. /dev/stderr
  47. /dev/stdin
  48. /dev/stdout
  49. root@shuttle block #


 
 
snif :'(
ça marchait nickel sous 2.4 et je sais pas pourqkoi la ca marche pas !
 

Code :
  1. root@shuttle block # cat /usr/src/linux/.config | grep USB
  2. # ALSA USB devices
  3. # CONFIG_SND_USB_AUDIO is not set
  4. # USB support
  5. CONFIG_USB=y
  6. CONFIG_USB_DEBUG=y
  7. # Miscellaneous USB options
  8. CONFIG_USB_DEVICEFS=y
  9. # CONFIG_USB_BANDWIDTH is not set
  10. # CONFIG_USB_DYNAMIC_MINORS is not set
  11. # USB Host Controller Drivers
  12. CONFIG_USB_EHCI_HCD=m
  13. CONFIG_USB_OHCI_HCD=m
  14. CONFIG_USB_UHCI_HCD=m
  15. # USB Device Class drivers
  16. # CONFIG_USB_AUDIO is not set
  17. # CONFIG_USB_BLUETOOTH_TTY is not set
  18. # CONFIG_USB_MIDI is not set
  19. # CONFIG_USB_ACM is not set
  20. CONFIG_USB_PRINTER=y
  21. CONFIG_USB_STORAGE=y
  22. CONFIG_USB_STORAGE_DEBUG=y
  23. CONFIG_USB_STORAGE_DATAFAB=y
  24. CONFIG_USB_STORAGE_FREECOM=y
  25. CONFIG_USB_STORAGE_ISD200=y
  26. CONFIG_USB_STORAGE_DPCM=y
  27. CONFIG_USB_STORAGE_HP8200e=y
  28. CONFIG_USB_STORAGE_SDDR09=y
  29. CONFIG_USB_STORAGE_SDDR55=y
  30. CONFIG_USB_STORAGE_JUMPSHOT=y
  31. # USB Human Interface Devices (HID)
  32. CONFIG_USB_HID=m
  33. CONFIG_USB_HIDINPUT=y
  34. CONFIG_USB_HIDDEV=y
  35. # USB HID Boot Protocol drivers
  36. CONFIG_USB_KBD=m
  37. CONFIG_USB_MOUSE=m
  38. CONFIG_USB_AIPTEK=m
  39. CONFIG_USB_WACOM=m
  40. # CONFIG_USB_KBTAB is not set
  41. # CONFIG_USB_POWERMATE is not set
  42. # CONFIG_USB_XPAD is not set
  43. # USB Imaging devices
  44. # CONFIG_USB_MDC800 is not set
  45. # CONFIG_USB_SCANNER is not set
  46. # CONFIG_USB_MICROTEK is not set
  47. # CONFIG_USB_HPUSBSCSI is not set
  48. # USB Multimedia devices
  49. # CONFIG_USB_DABUSB is not set
  50. # CONFIG_USB_VICAM is not set
  51. # CONFIG_USB_DSBR is not set
  52. # CONFIG_USB_IBMCAM is not set
  53. # CONFIG_USB_KONICAWC is not set
  54. # CONFIG_USB_OV511 is not set
  55. # CONFIG_USB_PWC is not set
  56. # CONFIG_USB_SE401 is not set
  57. # CONFIG_USB_STV680 is not set
  58. # USB Network adaptors
  59. # CONFIG_USB_CATC is not set
  60. # CONFIG_USB_KAWETH is not set
  61. # CONFIG_USB_PEGASUS is not set
  62. # CONFIG_USB_RTL8150 is not set
  63. # CONFIG_USB_USBNET is not set
  64. # USB port drivers
  65. # USB Serial Converter support
  66. CONFIG_USB_SERIAL=m
  67. CONFIG_USB_SERIAL_GENERIC=y
  68. CONFIG_USB_SERIAL_BELKIN=m
  69. CONFIG_USB_SERIAL_WHITEHEAT=m
  70. CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
  71. CONFIG_USB_SERIAL_EMPEG=m
  72. CONFIG_USB_SERIAL_FTDI_SIO=m
  73. CONFIG_USB_SERIAL_VISOR=m
  74. CONFIG_USB_SERIAL_IPAQ=m
  75. CONFIG_USB_SERIAL_IR=m
  76. CONFIG_USB_SERIAL_EDGEPORT=m
  77. CONFIG_USB_SERIAL_EDGEPORT_TI=m
  78. CONFIG_USB_SERIAL_KEYSPAN_PDA=m
  79. CONFIG_USB_SERIAL_KEYSPAN=m
  80. # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
  81. CONFIG_USB_SERIAL_KEYSPAN_USA28=y
  82. CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
  83. CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
  84. CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
  85. CONFIG_USB_SERIAL_KEYSPAN_USA19=y
  86. CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
  87. CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
  88. CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
  89. CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
  90. CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
  91. # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
  92. CONFIG_USB_SERIAL_KLSI=m
  93. # CONFIG_USB_SERIAL_KOBIL_SCT is not set
  94. CONFIG_USB_SERIAL_MCT_U232=m
  95. CONFIG_USB_SERIAL_PL2303=m
  96. # CONFIG_USB_SERIAL_SAFE is not set
  97. CONFIG_USB_SERIAL_CYBERJACK=m
  98. CONFIG_USB_SERIAL_XIRCOM=m
  99. CONFIG_USB_SERIAL_OMNINET=m
  100. CONFIG_USB_EZUSB=y
  101. # USB Miscellaneous drivers
  102. # CONFIG_USB_TIGL is not set
  103. # CONFIG_USB_AUERSWALD is not set
  104. # CONFIG_USB_RIO500 is not set
  105. # CONFIG_USB_BRLVGER is not set
  106. # CONFIG_USB_LCD is not set
  107. # CONFIG_USB_TEST is not set
  108. # CONFIG_USB_GADGET is not set
  109. root@shuttle block #
  111. root@shuttle block # cat /usr/src/linux/.config | grep STOR
  112. # CONFIG_SCSI_ULTRASTOR is not set
  113. CONFIG_USB_STORAGE=y
  114. CONFIG_USB_STORAGE_DEBUG=y
  115. CONFIG_USB_STORAGE_DATAFAB=y
  116. CONFIG_USB_STORAGE_FREECOM=y
  117. CONFIG_USB_STORAGE_ISD200=y
  118. CONFIG_USB_STORAGE_DPCM=y
  119. CONFIG_USB_STORAGE_HP8200e=y
  120. CONFIG_USB_STORAGE_SDDR09=y
  121. CONFIG_USB_STORAGE_SDDR55=y
  122. CONFIG_USB_STORAGE_JUMPSHOT=y
  123. root@shuttle block #


 
 
eske kelkun aurait une idée :)
merci !


Message édité par k666 le 18-12-2003 à 02:57:04

---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 18-12-2003 à 02:54:47   

Reply

Marsh Posté le 18-12-2003 à 07:59:07    

fdisk -l /dev/sda ?

Reply

Marsh Posté le 18-12-2003 à 23:26:59    

désolé pour l'attente
 

Code :
  1. root@shuttle kpoman # fdisk -l /dev/sda
  2.                                
  3. Disk /dev/sda: 131 MB, 131072000 bytes
  4. 5 heads, 50 sectors/track, 1024 cylinders
  5. Units = cylinders of 250 * 512 = 128000 bytes
  7.    Device Boot      Start         End      Blocks   Id  System
  8. /dev/sda1   ?      939366     8484986   943202437   64  Novell Netware 286
  9. Partition 1 has different physical/logical beginnings (non-Linux?):
  10.      phys=(32, 114, 46) logical=(939365, 4, 12)
  11. Partition 1 has different physical/logical endings:
  12.      phys=(369, 105, 51) logical=(8484985, 1, 35)
  13. Partition 1 does not end on cylinder boundary.
  14. /dev/sda2   ?     7880954    10055022   271758385+  20  Unknown
  15. Partition 2 has different physical/logical beginnings (non-Linux?):
  16.      phys=(378, 121, 37) logical=(7880953, 4, 47)
  17. Partition 2 has different physical/logical endings:
  18.      phys=(357, 117, 46) logical=(10055021, 0, 17)
  19. Partition 2 does not end on cylinder boundary.
  20. /dev/sda3   ?     7675951     8578355   112800441   20  Unknown
  21. Partition 3 has different physical/logical beginnings (non-Linux?):
  22.      phys=(370, 111, 53) logical=(7675950, 3, 1)
  23. Partition 3 has different physical/logical endings:
  24.      phys=(356, 114, 37) logical=(8578354, 0, 32)
  25. Partition 3 does not end on cylinder boundary.
  26. /dev/sda4   ?           1    13538079  1692259840    0  Empty
  27. Partition 4 has different physical/logical beginnings (non-Linux?):
  28.      phys=(0, 0, 0) logical=(0, 0, 1)
  29. Partition 4 has different physical/logical endings:
  30.      phys=(0, 0, 0) logical=(13538078, 3, 30)
  31. Partition 4 does not end on cylinder boundary.
  33. Partition table entries are not in disk order
  34. root@shuttle kpoman #


---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 18-12-2003 à 23:32:10    

hum
ca a l'air de détecter des trucs quand même car il voit bien que mon mp3 fait 128 megs
je pige pas ski spasse,
je sais pas comment faire,
j'aimerais trop le faire marcher car c la seule raison qui me fait booter sous windows des fois :/
 
enfin, si une ame charitable veut bien m'aider à dépanner le bordel :)


---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 18-12-2003 à 23:36:19    

le mieux serait de le repartitionner sous linux, la table de partition est mal vue par le noyau...
 
je sais pas comment lui faire prendre en compte la bonne table, peut-être qu'en spécifiant au boot les paramètres CHS pour sda, ça passerait... je ne sais pas s'il va les utiliser une fois le disque détecté par contre :/


Message édité par BMOTheKiller le 18-12-2003 à 23:36:49
Reply

Marsh Posté le 19-12-2003 à 00:30:17    

modprobe sd_mod ??

Reply

Marsh Posté le 19-12-2003 à 01:14:57    

sd_mod est déjà dans mon kernel :/
j'avais essayé en modprobant et c t pareil :/
 
BMO > je peux pas formater paske le truc y va pu marcher (par exemple upload de nouveau firmware sur une des partoches pour le mettre à jour)
 
:'(
 
 
help !


---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 19-12-2003 à 07:37:50    

essaye de monter sda2, sda3, et sda4, ou même sda tout court ...

Reply

Marsh Posté le 19-12-2003 à 10:02:51    

bin ya pas
ni sda1 ni 2 ni x
ya que sda
et ça marche pas en essayant de le monter
apparemment c paske le iriver (mon lecteur mp3) fait un partitionnement non standard
ca passait apparemment sur les noyeaux 2.4 car les check étaient basiques,
mais now ça ne passe plus
j'ai posté sur le forum de iriver pour qu'ils jettent un coup d'oeil, mais c plus que gênant cette histoire :'(
enfin bon chais pas trop quoi faire :/

Reply

Marsh Posté le 19-12-2003 à 10:37:24    

un bugreport ?

Reply

Marsh Posté le 19-12-2003 à 10:37:24   

Reply

Marsh Posté le 19-12-2003 à 11:57:49    

J'ai le même pb, que ce soit ma clef usb, mon iHP120 ou mon disque externe, impossible de monter quoi que ce soit :/
 
EDIT : je précise que tout marche en 2.4.23, du coup je boot en 2.4 pour attendant (en plus la molette de la souris ('fin, du touchpad...) marche pu non pu :'( )
 
Passez au 2.6.0 qu'y disais...


Message édité par cycojesus le 19-12-2003 à 12:02:32

---------------
Chết rồi ! ✍ ⌥⌘ http://github.com/gwenhael-le-moine/slackbuilds/
Reply

Marsh Posté le 19-12-2003 à 12:26:27    

udok a écrit :

un bugreport ?


 
j'en ai fait un sur le site/forum de iRiver
j'attends de voir skils me diront :/ pas trop d'espoir nénamoins :sol:
 
j'ai vu qu'il y a beaucoup de monde avec des problèmes de ce style!
apparemment le check du partitionnement est beuacoup plus violent et moins permissif sous 2.6 que 2.4 !

Reply

Marsh Posté le 19-12-2003 à 15:28:26    

yo et bin du coup je compile pas cette merde de noyau je reste sous mon 2.4 du coup ;-)

Reply

Marsh Posté le 19-12-2003 à 16:43:08    

http://forums.gentoo.org/viewtopic.php?t=107764
Ce post est bien foutu pour faire la check-list.
Il y a notamment des personnes qui ont des i-river et des lecteurs de CF sur port USB qui y ont résolu leur pb...
 
Je suis en kernel 2.6test11 et mon disque dur de 30Go sur USB2 est détecté correctement, tt comme mon baladeur mp3 sur port USB (ibead)..
 
Bon courage
 

Reply

Marsh Posté le 19-12-2003 à 16:44:33    

arko2k a écrit :

yo et bin du coup je compile pas cette merde de noyau je reste sous mon 2.4 du coup ;-)


quel respect des develos, bravo ! :o  
 :pfff:


---------------
Jotenakis
Reply

Marsh Posté le 19-12-2003 à 17:38:25    

mouahahaha :D


Message édité par k666 le 19-12-2003 à 17:38:35
Reply

Marsh Posté le 21-12-2003 à 04:40:28    

hello
bon j'ai quelques petits tests supplémentaires à poster; j'ai posté dans les google groups, j'espère qu'une âme charitable voudra bien s'intéresser:
 
 
-----
root@shuttle storage # ll /dev/sda*
lr-xr-xr-x    1 root     root           33 Dec 21 04:16 /dev/sda ->
scsi/host1/bus0/target0/lun0/disc
lr-xr-xr-x    1 root     root           34 Dec 21 04:19 /dev/sda1 ->
scsi/host1/bus0/target0/lun0/part1
lr-xr-xr-x    1 root     root           34 Dec 21 04:19 /dev/sda2 ->
scsi/host1/bus0/target0/lun0/part2
lr-xr-xr-x    1 root     root           34 Dec 21 04:19 /dev/sda3 ->
scsi/host1/bus0/target0/lun0/part3
lr-xr-xr-x    1 root     root           34 Dec 21 04:19 /dev/sda4 ->
scsi/host1/bus0/target0/lun0/part4
root@shuttle storage # mount /dev/sda
sda   sda1  sda2  sda3  sda4  
root@shuttle storage # mount /dev/sda4 /mnt/iriver/
mount: special device /dev/sda4 does not exist
root@shuttle storage # ll /dev/sda*
lr-xr-xr-x    1 root     root           33 Dec 21 04:16 /dev/sda ->
scsi/host1/bus0/target0/lun0/disc
root@shuttle storage #  
 
---------
 
 
so the devices appear when I do the fdisk listing command, but then
disappear when I try to mount them :/ this is disappointing !
 
on the same time I can see this on my dmesg:
 
when I fdisk -l /dev/sda :
---------
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda,
logical block 0
Buffer I/O error on device sda, logical block 0
ldm_validate_partition_table(): Disk read failed.
Buffer I/O error on device sda, logical block 0
 unable to read partition table
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4
----------
 
and when I try to mount the stuff:
----------
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda,
logical block 0
Buffer I/O error on device sda, logical block 0
ldm_validate_partition_table(): Disk read failed.
Buffer I/O error on device sda, logical block 0
 unable to read partition table
------------
 
 
then after this, all sda1 to 4 disappear !
 
 
 
:/


---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 21-12-2003 à 04:41:47    

pour info aussi je ne crois pas que ce soit (comme suggéré à certains endroits) un problème avec ehci_hcd car meme en le jertant ça fait ça !
help :)


---------------
mangez du mozilla c le futur, c votre DESTIN ! http://www.mozilla.org/releases/
Reply

Marsh Posté le 11-02-2004 à 17:09:53    

up au cas ou !
 
j'ai entendu parler d'un patch (comme quoi c un bug officiel)
j'ai un lien vers sourceforge, dans le forum ils citent ce patch, mais le lien est mort :/

Reply

Marsh Posté le 11-02-2004 à 17:14:57    

faut graver en IDE déjà :D
moi il me manquait juste le sd_mod quis e chargait pas hop, mon sda était là sinon

Reply

Marsh Posté le 11-02-2004 à 18:10:25    

Moi j'ai le meme problème :ouch: hier j'ai essayé de faire fonctionner une clef USB mais j'ai pas les sdax :/
 
 
 
ps:jamais testé sur 2.4 :whistle:

Reply

Marsh Posté le 11-02-2004 à 18:12:03    

arko2k a écrit :

yo et bin du coup je compile pas cette merde de noyau je reste sous mon 2.4 du coup ;-)

Mais dis donc tu dois etre hyper fort en dev pour te permettre de dire ça  [:le_pilote]

Reply

Marsh Posté le 11-02-2004 à 18:19:42    

mouahahahhahahahhah

Reply

Marsh Posté le 24-03-2004 à 10:45:32    

yo!
ca continue de pas marcher le truc :'(
 

Code :
  1. usb 1-2: new full speed USB device using address 2
  2. scsi0 : SCSI emulation for USB Mass Storage devices
  3.   Vendor: iRiver    Model: iFP Mass Driver   Rev: 1.00
  4.   Type:   Direct-Access                      ANSI SCSI revision: 02
  5. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  6. sda: assuming Write Enabled
  7. sda: assuming drive cache: write through
  8. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  9. Buffer I/O error on device sda, logical block 0
  10. ldm_validate_partition_table(): Disk read failed.
  11. Buffer I/O error on device sda, logical block 0
  12. unable to read partition table
  13. Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
  14. Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
  15. USB Mass Storage device found at 2
  16. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  17. sda: assuming Write Enabled
  18. sda: assuming drive cache: write through
  19. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  20. sda: assuming Write Enabled
  21. sda: assuming drive cache: write through
  22. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  23. Buffer I/O error on device sda, logical block 0
  24. ldm_validate_partition_table(): Disk read failed.
  25. Buffer I/O error on device sda, logical block 0
  26. unable to read partition table
  27. Buffer I/O error on device sda, logical block 0
  28. Buffer I/O error on device sda, logical block 1
  29. Buffer I/O error on device sda, logical block 2
  30. Buffer I/O error on device sda, logical block 3
  31. Buffer I/O error on device sda, logical block 4
  32. Buffer I/O error on device sda, logical block 5
  33. Buffer I/O error on device sda, logical block 6
  34. Buffer I/O error on device sda, logical block 7
  35. Buffer I/O error on device sda, logical block 8
  36. Buffer I/O error on device sda, logical block 9
  37. Buffer I/O error on device sda, logical block 10
  38. Buffer I/O error on device sda, logical block 11
  39. Buffer I/O error on device sda, logical block 12
  40. Buffer I/O error on device sda, logical block 13
  41. Buffer I/O error on device sda, logical block 14
  42. Buffer I/O error on device sda, logical block 15
  43. Buffer I/O error on device sda, logical block 8
  44. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  45. sda: assuming Write Enabled
  46. sda: assuming drive cache: write through
  47. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  48. sda: assuming Write Enabled
  49. sda: assuming drive cache: write through
  50. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  51. Buffer I/O error on device sda, logical block 0
  52. ldm_validate_partition_table(): Disk read failed.
  53. Buffer I/O error on device sda, logical block 0
  54. unable to read partition table
  55. FAT: unable to read boot sector
  56. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  57. sda: assuming Write Enabled
  58. sda: assuming drive cache: write through
  59. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  60. sda: assuming Write Enabled
  61. sda: assuming drive cache: write through
  62. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  63. Buffer I/O error on device sda, logical block 0
  64. ldm_validate_partition_table(): Disk read failed.
  65. Buffer I/O error on device sda, logical block 0
  66. unable to read partition table
  67. Buffer I/O error on device sda, logical block 0
  68. Buffer I/O error on device sda, logical block 1
  69. Buffer I/O error on device sda, logical block 2
  70. Buffer I/O error on device sda, logical block 3
  71. Buffer I/O error on device sda, logical block 4
  72. Buffer I/O error on device sda, logical block 5
  73. Buffer I/O error on device sda, logical block 6
  74. Buffer I/O error on device sda, logical block 7
  75. Buffer I/O error on device sda, logical block 8
  76. Buffer I/O error on device sda, logical block 9
  77. Buffer I/O error on device sda, logical block 10
  78. Buffer I/O error on device sda, logical block 11
  79. Buffer I/O error on device sda, logical block 12
  80. Buffer I/O error on device sda, logical block 13
  81. Buffer I/O error on device sda, logical block 14
  82. Buffer I/O error on device sda, logical block 15
  83. Buffer I/O error on device sda, logical block 8
  84. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  85. sda: assuming Write Enabled
  86. sda: assuming drive cache: write through
  87. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  88. sda: assuming Write Enabled
  89. sda: assuming drive cache: write through
  90. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  91. Buffer I/O error on device sda, logical block 0
  92. ldm_validate_partition_table(): Disk read failed.
  93. Buffer I/O error on device sda, logical block 0
  94. unable to read partition table
  95. FAT: unable to read boot sector
  96. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  97. sda: assuming Write Enabled
  98. sda: assuming drive cache: write through
  99. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  100. sda: assuming Write Enabled
  101. sda: assuming drive cache: write through
  102. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  103. Buffer I/O error on device sda, logical block 0
  104. ldm_validate_partition_table(): Disk read failed.
  105. Buffer I/O error on device sda, logical block 0
  106. unable to read partition table
  107. Buffer I/O error on device sda, logical block 0
  108. Buffer I/O error on device sda, logical block 1
  109. Buffer I/O error on device sda, logical block 2
  110. Buffer I/O error on device sda, logical block 3
  111. Buffer I/O error on device sda, logical block 4
  112. Buffer I/O error on device sda, logical block 5
  113. Buffer I/O error on device sda, logical block 6
  114. Buffer I/O error on device sda, logical block 7
  115. Buffer I/O error on device sda, logical block 8
  116. Buffer I/O error on device sda, logical block 9
  117. Buffer I/O error on device sda, logical block 10
  118. Buffer I/O error on device sda, logical block 11
  119. Buffer I/O error on device sda, logical block 12
  120. Buffer I/O error on device sda, logical block 13
  121. Buffer I/O error on device sda, logical block 14
  122. Buffer I/O error on device sda, logical block 15
  123. Buffer I/O error on device sda, logical block 8
  124. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  125. sda: assuming Write Enabled
  126. sda: assuming drive cache: write through
  127. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  128. sda: assuming Write Enabled
  129. sda: assuming drive cache: write through
  130. /dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  131. Buffer I/O error on device sda, logical block 0
  132. ldm_validate_partition_table(): Disk read failed.
  133. Buffer I/O error on device sda, logical block 0
  134. unable to read partition table
  135. FAT: unable to read boot sector
  136. usb 1-2: USB disconnect, address 2
  137. usb 1-2: new full speed USB device using address 3
  138. scsi1 : SCSI emulation for USB Mass Storage devices
  139.   Vendor: iRiver    Model: iFP Mass Driver   Rev: 1.00
  140.   Type:   Direct-Access                      ANSI SCSI revision: 02
  141. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  142. sda: assuming Write Enabled
  143. sda: assuming drive cache: write through
  144. /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  145. Buffer I/O error on device sda, logical block 0
  146. ldm_validate_partition_table(): Disk read failed.
  147. Buffer I/O error on device sda, logical block 0
  148. unable to read partition table
  149. Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
  150. Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
  151. USB Mass Storage device found at 3
  152. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  153. sda: assuming Write Enabled
  154. sda: assuming drive cache: write through
  155. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  156. sda: assuming Write Enabled
  157. sda: assuming drive cache: write through
  158. /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  159. Buffer I/O error on device sda, logical block 0
  160. ldm_validate_partition_table(): Disk read failed.
  161. Buffer I/O error on device sda, logical block 0
  162. unable to read partition table
  163. Buffer I/O error on device sda, logical block 0
  164. Buffer I/O error on device sda, logical block 1
  165. Buffer I/O error on device sda, logical block 2
  166. Buffer I/O error on device sda, logical block 3
  167. Buffer I/O error on device sda, logical block 4
  168. Buffer I/O error on device sda, logical block 5
  169. Buffer I/O error on device sda, logical block 6
  170. Buffer I/O error on device sda, logical block 7
  171. Buffer I/O error on device sda, logical block 8
  172. Buffer I/O error on device sda, logical block 9
  173. Buffer I/O error on device sda, logical block 10
  174. Buffer I/O error on device sda, logical block 11
  175. Buffer I/O error on device sda, logical block 12
  176. Buffer I/O error on device sda, logical block 13
  177. Buffer I/O error on device sda, logical block 14
  178. Buffer I/O error on device sda, logical block 15
  179. Buffer I/O error on device sda, logical block 8
  180. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  181. sda: assuming Write Enabled
  182. sda: assuming drive cache: write through
  183. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  184. sda: assuming Write Enabled
  185. sda: assuming drive cache: write through
  186. /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  187. Buffer I/O error on device sda, logical block 0
  188. ldm_validate_partition_table(): Disk read failed.
  189. Buffer I/O error on device sda, logical block 0
  190. unable to read partition table
  191. FAT: unable to read boot sector
  192. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  193. sda: assuming Write Enabled
  194. sda: assuming drive cache: write through
  195. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  196. sda: assuming Write Enabled
  197. sda: assuming drive cache: write through
  198. /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  199. Buffer I/O error on device sda, logical block 0
  200. ldm_validate_partition_table(): Disk read failed.
  201. Buffer I/O error on device sda, logical block 0
  202. unable to read partition table
  203. Buffer I/O error on device sda, logical block 0
  204. Buffer I/O error on device sda, logical block 1
  205. Buffer I/O error on device sda, logical block 2
  206. Buffer I/O error on device sda, logical block 3
  207. Buffer I/O error on device sda, logical block 4
  208. Buffer I/O error on device sda, logical block 5
  209. Buffer I/O error on device sda, logical block 6
  210. Buffer I/O error on device sda, logical block 7
  211. Buffer I/O error on device sda, logical block 8
  212. Buffer I/O error on device sda, logical block 9
  213. Buffer I/O error on device sda, logical block 10
  214. Buffer I/O error on device sda, logical block 11
  215. Buffer I/O error on device sda, logical block 12
  216. Buffer I/O error on device sda, logical block 13
  217. Buffer I/O error on device sda, logical block 14
  218. Buffer I/O error on device sda, logical block 15
  219. Buffer I/O error on device sda, logical block 8
  220. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  221. sda: assuming Write Enabled
  222. sda: assuming drive cache: write through
  223. SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
  224. sda: assuming Write Enabled
  225. sda: assuming drive cache: write through
  226. /dev/scsi/host1/bus0/target0/lun0:<3>Buffer I/O error on device sda, logical block 0
  227. Buffer I/O error on device sda, logical block 0
  228. ldm_validate_partition_table(): Disk read failed.
  229. Buffer I/O error on device sda, logical block 0
  230. unable to read partition table
  231. FAT: unable to read boot sector
  232. root@kandinsky stegmanp #

Reply

Marsh Posté le 17-04-2004 à 15:14:51    

Même problème :(
2.6.3 et pas de sdax ...

Reply

Marsh Posté le 18-04-2004 à 01:00:51    

snif :'(
j'ai vu que les lovesource avaient un patch iriver
il s'agit peut etre du truc pour que ca marche !
mais jai pas testé encore
j'espere qu'un jour ca passera dans les mm voir les officielles!

Reply

Marsh Posté le 18-04-2004 à 01:04:13    

je débarque ... z'etes sur de pas avoir oublier de charger tel ou tel module ? parce que moi du jour au lendemain, j'en ai un qui s'est plus chargé, et plus de device

Reply

Marsh Posté le 18-04-2004 à 04:24:18    

nananan c completement sur (du moins pour moi :D)
c un bug
mais ils sont pas prets de le corriger :/

Reply

Marsh Posté le    

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed