You already have a LILO configuration in /etc/lilo.conf
Install a boot block using the existing /etc/lilo.conf? [Yes]
Testing lilo.conf ...
An error occurred while running lilo in test mode, a log is
available in /var/log/lilo_log.15733. Please edit /etc/lilo.conf
manually and re-run lilo, or make other arrangements to boot
your machine.
         Please hit return to continue
 
# cat /var/log/lilo_log.15733
Warning: '/proc/partitions' does not match '/dev' directory structure.
    Name change: '/dev/ide/host0/bus0/target0/lun0/disc' -> '/dev/hda'
Fatal: open /initrd.img: No such file or directory

LILO version 22.6, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2004 John Coffman
Released 02-Sep-2004, and compiled at 19:13:54 on Sep 13 2004
Debian GNU/Linux
 
Warning: LBA32 addressing assumed
Reading boot sector from /dev/sda
Warning: '/proc/partitions' does not match '/dev' directory structure.
    Name change: '/dev/ide/host0/bus0/target0/lun0/disc' -> '/dev/hda'
    Name change: '/dev/ide/host0/bus0/target0/lun0/part1' -> '/dev/hda1'
    Name change: '/dev/ide/host0/bus0/target0/lun0/part3' -> '/dev/hda3'
    Name change: '/dev/ide/host0/bus0/target0/lun0/part5' -> '/dev/hda5'
    Name change: '/dev/scsi/host0/bus0/target6/lun0/disc' -> '/dev/sda'
    Name change: '/dev/scsi/host0/bus0/target6/lun0/part1' -> '/dev/sda1'
    Name change: '/dev/scsi/host0/bus0/target6/lun0/part2' -> '/dev/sda2'
    Name change: '/dev/scsi/host0/bus0/target6/lun0/part3' -> '/dev/sda3'
Using MENU secondary loader
Calling map_insert_data
 
Boot image: /vmlinuz -> boot/vmlinuz-2.6.8
Mapping RAM disk /initrd.img
Fatal: open /initrd.img: No such file or directory

# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# ---------------       `install-mbr(8)', `/usr/share/doc/lilo/',
#                       and `/usr/share/doc/mbr/'.
 
# +---------------------------------------------------------------+
# |                        !! Reminder !!                         |
# |                                                               |
# | Don't forget to run `lilo' after you make changes to this     |
# | conffile, `/boot/bootmess.txt' (if you have created it), or   |
# | install a new kernel.  The computer will most likely fail to  |
# | boot if a kernel-image post-install script or you don't       |
# | remember to run `lilo'.                                       |
# |                                                               |
# +---------------------------------------------------------------+
 
# Specifies the boot device.  This is where Lilo installs its boot
# block.  It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/sda
 
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/sda2
 
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller.  Using `compact' is especially recommended when
# booting from a floppy disk.  It is disabled here by default
# because it doesn't always work.
#
# compact
 
# Installs the specified file as the new boot sector
# You have the choice between: text, bmp, and menu
# Look in lilo.conf(5) manpage for details
#
#install=menu
 
# Specifies the location of the map file
#
map=/boot/map
 
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration.  If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well.  Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
 
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=100
 
# You can put a customized boot message up if you like.  If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress.  `single-key' goes with the `alias' lines in the
# `image' configurations below.  eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
#       prompt
#       delay=100
#       timeout=100
 
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode> )
#
# vga=ask
# vga=9
#
vga=normal
 
# Kernel command line options that apply to all installed images go
# here.  See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""
 
# If you used a serial console to install Debian, this option should be
# enabled by default.
# serial=
 
#
# Boot up Linux by default.
#
default=Linux
timeout = 100
prompt
 
image=/vmlinuz
        label=Linux
        read-only
#       restricted
#       alias=1
 
        initrd=/initrd.img
 
image=/vmlinuz.old
        label=LinuxOLD
        read-only
        optional
#       restricted
#       alias=2
 
        initrd=/initrd.img.old
 
 
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
 
other=/dev/sda1
        label=Windows