portable et linux

portable et linux - Installation - Linux et OS Alternatifs

Marsh Posté le 19-04-2003 à 22:39:35    

coucou !!
 
je vien d'installer la mandrake 9.1 sur mon portable (compaq presario 716EA) et seul ombre a ce tableau merveilleux car tout marche vraiment impec ca en reste hallucinant d'ailleur c'est que le portable chauffe énormément !!!!
 
meme quand on fais rien ou pas grand chose genre surf/prog/chat... le pc est bouillant alors que sous win pour le meme genre d'occupation la température est quand meme nettement inférieure....
 
Sous Win doit surement y avoir qqch qui désactive le proc par moment pour qu'il chauffe moins  
je sais aussi que pour les athlon4 il y a un "driver" qui downclock le proc quand on fais pas grand chose mais sous linux j'ai rien trouver de tres concluant .....    
 

Reply

Marsh Posté le 19-04-2003 à 22:39:35   

Reply

Marsh Posté le 19-04-2003 à 22:43:29    

il y a une option idle dans la config du noyau si ça te tente de recompiler, mais je ne sais pas ce que ça vaut. Il y a surement des softs qui font ça. va sur freshmeat.net

Reply

Marsh Posté le 20-04-2003 à 11:28:15    

nikosaka a écrit :

il y a une option idle dans la config du noyau si ça te tente de recompiler, mais je ne sais pas ce que ça vaut. Il y a surement des softs qui font ça. va sur freshmeat.net


 
pour recompiler chui obliger de prendre un nouveau kernel ou je peut le faire avec l'existant ??
 
et sinon pour la copmmande c'est quoi ?
j'ai pas trouver  :D

Reply

Marsh Posté le 20-04-2003 à 12:20:25    

J'ai eu le même problème sur un Compaq Presario 713. En fait le portable est 100% ACPI et n'utilise l'APM que pour le power down.
Il faut que tu récupères un noyau récent (genre le 2.4.20) et que tu le patches avec le support ACPI parce que celui qui est d'origine dedans est tout moisi.
 
Tu trouveras le patch qui va bien sur  http://www.sourceforge.net/projects/acpi
 
Après coche toutes les options ACPI (sauf Toshiba) et quand tu rebootes, fais un modconf et assure-toi que les modules se sont bien chargés. Au besoin charge-les à la main. Et puis pour une meilleure utilisation de l'économie d'énergie, installe le démon qui s'en charge (packet acpid dans la Debian).
 
Voilà si tu as besoin de trucs plus précis, n'hésite pas


Message édité par Goon le 20-04-2003 à 12:21:24
Reply

Marsh Posté le 23-04-2003 à 00:05:04    

je me suis un peu documenté depuis le dernier post mais le pb est tjrs le meme :(
 
j'ai installer un rpm acpi mais il me dis que l'acpi est manquant dans le kernel (normal vu que j'y ai pas toucher...)
 
seulement d'apres ce que j'ai compris pour recompiler le kernel on peut faire un make xconfig mais quand je tape ca j'ai le message suivant : make: *** Pas de règle pour fabriquer la cible « xconfig ». Arrêt.
 
c'est la 1ere fois que je tente ce genre d'opération donc désolé si je pose des question a la noix....

Reply

Marsh Posté le 23-04-2003 à 07:21:48    

tente un make menuconfig
c est une interface en curses

Reply

Marsh Posté le 23-04-2003 à 10:02:32    

stim a écrit :

je me suis un peu documenté depuis le dernier post mais le pb est tjrs le meme :(
 
j'ai installer un rpm acpi mais il me dis que l'acpi est manquant dans le kernel (normal vu que j'y ai pas toucher...)
 
seulement d'apres ce que j'ai compris pour recompiler le kernel on peut faire un make xconfig mais quand je tape ca j'ai le message suivant : make: *** Pas de règle pour fabriquer la cible « xconfig ». Arrêt.
 
c'est la 1ere fois que je tente ce genre d'opération donc désolé si je pose des question a la noix....


n'oublie pas kil fau etre dans le repertoire ou se trouve les source de ton noyau pour taper cette commande ;)

Reply

Marsh Posté le 23-04-2003 à 10:26:11    

Voilà pour commencer mon fichier de config pour le noyau 2.4.20. Y a pas de différence de driver entre ton portable et le mien (Compaq Presario 713EA) si ce n'est que je n'ai pas de FireWire. Mais je crois que c'est encore assez expérimental sous Linux.
 
 

Code :
  1. #
  2. # Automatically generated by make menuconfig: don't edit
  3. #
  4. CONFIG_X86=y
  5. # CONFIG_SBUS is not set
  6. CONFIG_UID16=y
  8. #
  9. # Code maturity level options
  10. #
  11. CONFIG_EXPERIMENTAL=y
  13. #
  14. # Loadable module support
  15. #
  16. CONFIG_MODULES=y
  17. CONFIG_MODVERSIONS=y
  18. CONFIG_KMOD=y
  20. #
  21. # Processor type and features
  22. #
  23. # CONFIG_M386 is not set
  24. # CONFIG_M486 is not set
  25. # CONFIG_M586 is not set
  26. # CONFIG_M586TSC is not set
  27. # CONFIG_M586MMX is not set
  28. # CONFIG_M686 is not set
  29. # CONFIG_MPENTIUMIII is not set
  30. # CONFIG_MPENTIUM4 is not set
  31. # CONFIG_MK6 is not set
  32. CONFIG_MK7=y
  33. # CONFIG_MELAN is not set
  34. # CONFIG_MCRUSOE is not set
  35. # CONFIG_MWINCHIPC6 is not set
  36. # CONFIG_MWINCHIP2 is not set
  37. # CONFIG_MWINCHIP3D is not set
  38. # CONFIG_MCYRIXIII is not set
  39. CONFIG_X86_WP_WORKS_OK=y
  40. CONFIG_X86_INVLPG=y
  41. CONFIG_X86_CMPXCHG=y
  42. CONFIG_X86_XADD=y
  43. CONFIG_X86_BSWAP=y
  44. CONFIG_X86_POPAD_OK=y
  45. # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
  46. CONFIG_RWSEM_XCHGADD_ALGORITHM=y
  47. CONFIG_X86_L1_CACHE_SHIFT=6
  48. CONFIG_X86_HAS_TSC=y
  49. CONFIG_X86_GOOD_APIC=y
  50. CONFIG_X86_USE_3DNOW=y
  51. CONFIG_X86_PGE=y
  52. CONFIG_X86_USE_PPRO_CHECKSUM=y
  53. CONFIG_X86_F00F_WORKS_OK=y
  54. CONFIG_X86_MCE=y
  55. # CONFIG_TOSHIBA is not set
  56. # CONFIG_I8K is not set
  57. CONFIG_MICROCODE=m
  58. CONFIG_X86_MSR=m
  59. CONFIG_X86_CPUID=m
  60. CONFIG_NOHIGHMEM=y
  61. # CONFIG_HIGHMEM4G is not set
  62. # CONFIG_HIGHMEM64G is not set
  63. # CONFIG_HIGHMEM is not set
  64. # CONFIG_MATH_EMULATION is not set
  65. # CONFIG_MTRR is not set
  66. # CONFIG_SMP is not set
  67. # CONFIG_X86_UP_APIC is not set
  68. # CONFIG_X86_UP_IOAPIC is not set
  69. # CONFIG_X86_TSC_DISABLE is not set
  70. CONFIG_X86_TSC=y
  72. #
  73. # General setup
  74. #
  75. CONFIG_NET=y
  76. CONFIG_PCI=y
  77. # CONFIG_PCI_GOBIOS is not set
  78. # CONFIG_PCI_GODIRECT is not set
  79. CONFIG_PCI_GOANY=y
  80. CONFIG_PCI_BIOS=y
  81. CONFIG_PCI_DIRECT=y
  82. CONFIG_ISA=y
  83. CONFIG_PCI_NAMES=y
  84. # CONFIG_EISA is not set
  85. # CONFIG_MCA is not set
  86. CONFIG_HOTPLUG=y
  88. #
  89. # PCMCIA/CardBus support
  90. #
  91. CONFIG_PCMCIA=m
  92. CONFIG_CARDBUS=y
  93. # CONFIG_TCIC is not set
  94. # CONFIG_I82092 is not set
  95. # CONFIG_I82365 is not set
  97. #
  98. # PCI Hotplug Support
  99. #
  100. # CONFIG_HOTPLUG_PCI is not set
  101. # CONFIG_HOTPLUG_PCI_COMPAQ is not set
  102. # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
  103. # CONFIG_HOTPLUG_PCI_ACPI is not set
  104. CONFIG_SYSVIPC=y
  105. # CONFIG_BSD_PROCESS_ACCT is not set
  106. CONFIG_SYSCTL=y
  107. CONFIG_KCORE_ELF=y
  108. # CONFIG_KCORE_AOUT is not set
  109. CONFIG_BINFMT_AOUT=y
  110. CONFIG_BINFMT_ELF=y
  111. CONFIG_BINFMT_MISC=y
  112. CONFIG_PM=y
  113. CONFIG_APM=m
  114. # CONFIG_APM_IGNORE_USER_SUSPEND is not set
  115. # CONFIG_APM_DO_ENABLE is not set
  116. # CONFIG_APM_CPU_IDLE is not set
  117. # CONFIG_APM_DISPLAY_BLANK is not set
  118. # CONFIG_APM_RTC_IS_GMT is not set
  119. # CONFIG_APM_ALLOW_INTS is not set
  120. CONFIG_APM_REAL_MODE_POWER_OFF=y
  122. #
  123. # ACPI Support
  124. #
  125. CONFIG_ACPI=y
  126. CONFIG_ACPI_BOOT=y
  127. CONFIG_ACPI_BUS=y
  128. CONFIG_ACPI_INTERPRETER=y
  129. CONFIG_ACPI_EC=y
  130. CONFIG_ACPI_POWER=y
  131. CONFIG_ACPI_PCI=y
  132. CONFIG_ACPI_SLEEP=y
  133. CONFIG_ACPI_SYSTEM=y
  134. CONFIG_ACPI_AC=m
  135. CONFIG_ACPI_BATTERY=m
  136. CONFIG_ACPI_BUTTON=m
  137. CONFIG_ACPI_FAN=m
  138. CONFIG_ACPI_PROCESSOR=m
  139. CONFIG_ACPI_THERMAL=m
  140. # CONFIG_ACPI_TOSHIBA is not set
  141. # CONFIG_ACPI_DEBUG is not set
  143. #
  144. # Memory Technology Devices (MTD)
  145. #
  146. # CONFIG_MTD is not set
  148. #
  149. # Parallel port support
  150. #
  151. CONFIG_PARPORT=m
  152. CONFIG_PARPORT_PC=m
  153. CONFIG_PARPORT_PC_CML1=m
  154. # CONFIG_PARPORT_SERIAL is not set
  155. # CONFIG_PARPORT_PC_FIFO is not set
  156. # CONFIG_PARPORT_PC_SUPERIO is not set
  157. # CONFIG_PARPORT_PC_PCMCIA is not set
  158. # CONFIG_PARPORT_AMIGA is not set
  159. # CONFIG_PARPORT_MFC3 is not set
  160. # CONFIG_PARPORT_ATARI is not set
  161. # CONFIG_PARPORT_GSC is not set
  162. # CONFIG_PARPORT_SUNBPP is not set
  163. # CONFIG_PARPORT_OTHER is not set
  164. # CONFIG_PARPORT_1284 is not set
  166. #
  167. # Plug and Play configuration
  168. #
  169. CONFIG_PNP=m
  170. # CONFIG_ISAPNP is not set
  172. #
  173. # Block devices
  174. #
  175. CONFIG_BLK_DEV_FD=m
  176. # CONFIG_BLK_DEV_XD is not set
  177. # CONFIG_PARIDE is not set
  178. # CONFIG_BLK_CPQ_DA is not set
  179. # CONFIG_BLK_CPQ_CISS_DA is not set
  180. # CONFIG_CISS_SCSI_TAPE is not set
  181. # CONFIG_BLK_DEV_DAC960 is not set
  182. # CONFIG_BLK_DEV_UMEM is not set
  183. # CONFIG_BLK_DEV_LOOP is not set
  184. # CONFIG_BLK_DEV_NBD is not set
  185. CONFIG_BLK_DEV_RAM=m
  186. CONFIG_BLK_DEV_RAM_SIZE=4096
  187. # CONFIG_BLK_DEV_INITRD is not set
  188. CONFIG_BLK_STATS=y
  190. #
  191. # Multi-device support (RAID and LVM)
  192. #
  193. # CONFIG_MD is not set
  194. # CONFIG_BLK_DEV_MD is not set
  195. # CONFIG_MD_LINEAR is not set
  196. # CONFIG_MD_RAID0 is not set
  197. # CONFIG_MD_RAID1 is not set
  198. # CONFIG_MD_RAID5 is not set
  199. # CONFIG_MD_MULTIPATH is not set
  200. # CONFIG_BLK_DEV_LVM is not set
  202. #
  203. # Networking options
  204. #
  205. CONFIG_PACKET=y
  206. # CONFIG_PACKET_MMAP is not set
  207. # CONFIG_NETLINK_DEV is not set
  208. # CONFIG_NETFILTER is not set
  209. CONFIG_FILTER=y
  210. CONFIG_UNIX=y
  211. CONFIG_INET=y
  212. CONFIG_IP_MULTICAST=y
  213. # CONFIG_IP_ADVANCED_ROUTER is not set
  214. # CONFIG_IP_PNP is not set
  215. # CONFIG_NET_IPIP is not set
  216. # CONFIG_NET_IPGRE is not set
  217. # CONFIG_IP_MROUTE is not set
  218. # CONFIG_ARPD is not set
  219. # CONFIG_INET_ECN is not set
  220. # CONFIG_SYN_COOKIES is not set
  221. # CONFIG_IPV6 is not set
  222. # CONFIG_KHTTPD is not set
  223. # CONFIG_ATM is not set
  224. # CONFIG_VLAN_8021Q is not set
  225. # CONFIG_IPX is not set
  226. # CONFIG_ATALK is not set
  228. #
  229. # Appletalk devices
  230. #
  231. # CONFIG_DEV_APPLETALK is not set
  232. # CONFIG_DECNET is not set
  233. # CONFIG_BRIDGE is not set
  234. # CONFIG_X25 is not set
  235. # CONFIG_LAPB is not set
  236. # CONFIG_LLC is not set
  237. # CONFIG_NET_DIVERT is not set
  238. # CONFIG_ECONET is not set
  239. # CONFIG_WAN_ROUTER is not set
  240. # CONFIG_NET_FASTROUTE is not set
  241. # CONFIG_NET_HW_FLOWCONTROL is not set
  243. #
  244. # QoS and/or fair queueing
  245. #
  246. # CONFIG_NET_SCHED is not set
  248. #
  249. # Network testing
  250. #
  251. # CONFIG_NET_PKTGEN is not set
  253. #
  254. # Telephony Support
  255. #
  256. # CONFIG_PHONE is not set
  257. # CONFIG_PHONE_IXJ is not set
  258. # CONFIG_PHONE_IXJ_PCMCIA is not set
  260. #
  261. # ATA/IDE/MFM/RLL support
  262. #
  263. CONFIG_IDE=y
  265. #
  266. # IDE, ATA and ATAPI Block devices
  267. #
  268. CONFIG_BLK_DEV_IDE=y
  269. # CONFIG_BLK_DEV_HD_IDE is not set
  270. # CONFIG_BLK_DEV_HD is not set
  271. CONFIG_BLK_DEV_IDEDISK=y
  272. CONFIG_IDEDISK_MULTI_MODE=y
  273. # CONFIG_IDEDISK_STROKE is not set
  274. # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
  275. # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
  276. # CONFIG_BLK_DEV_IDEDISK_IBM is not set
  277. # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
  278. # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
  279. # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
  280. # CONFIG_BLK_DEV_IDEDISK_WD is not set
  281. # CONFIG_BLK_DEV_COMMERIAL is not set
  282. # CONFIG_BLK_DEV_TIVO is not set
  283. # CONFIG_BLK_DEV_IDECS is not set
  284. CONFIG_BLK_DEV_IDECD=m
  285. # CONFIG_BLK_DEV_IDETAPE is not set
  286. CONFIG_BLK_DEV_IDEFLOPPY=m
  287. CONFIG_BLK_DEV_IDESCSI=m
  288. # CONFIG_IDE_TASK_IOCTL is not set
  289. CONFIG_BLK_DEV_CMD640=y
  290. # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
  291. # CONFIG_BLK_DEV_ISAPNP is not set
  292. CONFIG_BLK_DEV_RZ1000=y
  293. CONFIG_BLK_DEV_IDEPCI=y
  294. CONFIG_IDEPCI_SHARE_IRQ=y
  295. CONFIG_BLK_DEV_IDEDMA_PCI=y
  296. # CONFIG_BLK_DEV_OFFBOARD is not set
  297. # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
  298. CONFIG_IDEDMA_PCI_AUTO=y
  299. # CONFIG_IDEDMA_ONLYDISK is not set
  300. CONFIG_BLK_DEV_IDEDMA=y
  301. # CONFIG_IDEDMA_PCI_WIP is not set
  302. # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
  303. # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
  304. CONFIG_BLK_DEV_ADMA=y
  305. # CONFIG_BLK_DEV_AEC62XX is not set
  306. # CONFIG_AEC62XX_TUNING is not set
  307. # CONFIG_BLK_DEV_ALI15X3 is not set
  308. # CONFIG_WDC_ALI15X3 is not set
  309. # CONFIG_BLK_DEV_AMD74XX is not set
  310. # CONFIG_AMD74XX_OVERRIDE is not set
  311. # CONFIG_BLK_DEV_CMD64X is not set
  312. # CONFIG_BLK_DEV_CMD680 is not set
  313. # CONFIG_BLK_DEV_CY82C693 is not set
  314. # CONFIG_BLK_DEV_CS5530 is not set
  315. # CONFIG_BLK_DEV_HPT34X is not set
  316. # CONFIG_HPT34X_AUTODMA is not set
  317. # CONFIG_BLK_DEV_HPT366 is not set
  318. # CONFIG_BLK_DEV_PIIX is not set
  319. # CONFIG_PIIX_TUNING is not set
  320. # CONFIG_BLK_DEV_NS87415 is not set
  321. # CONFIG_BLK_DEV_OPTI621 is not set
  322. # CONFIG_BLK_DEV_PDC202XX is not set
  323. # CONFIG_PDC202XX_BURST is not set
  324. # CONFIG_PDC202XX_FORCE is not set
  325. # CONFIG_BLK_DEV_SVWKS is not set
  326. # CONFIG_BLK_DEV_SIS5513 is not set
  327. # CONFIG_BLK_DEV_SLC90E66 is not set
  328. # CONFIG_BLK_DEV_TRM290 is not set
  329. CONFIG_BLK_DEV_VIA82CXXX=y
  330. # CONFIG_IDE_CHIPSETS is not set
  331. CONFIG_IDEDMA_AUTO=y
  332. # CONFIG_IDEDMA_IVB is not set
  333. # CONFIG_DMA_NONPCI is not set
  334. CONFIG_BLK_DEV_IDE_MODES=y
  335. # CONFIG_BLK_DEV_ATARAID is not set
  336. # CONFIG_BLK_DEV_ATARAID_PDC is not set
  337. # CONFIG_BLK_DEV_ATARAID_HPT is not set
  339. #
  340. # SCSI support
  341. #
  342. CONFIG_SCSI=m
  343. CONFIG_BLK_DEV_SD=m
  344. CONFIG_SD_EXTRA_DEVS=40
  345. # CONFIG_CHR_DEV_ST is not set
  346. # CONFIG_CHR_DEV_OSST is not set
  347. CONFIG_BLK_DEV_SR=m
  348. # CONFIG_BLK_DEV_SR_VENDOR is not set
  349. CONFIG_SR_EXTRA_DEVS=2
  350. CONFIG_CHR_DEV_SG=m
  351. CONFIG_SCSI_DEBUG_QUEUES=y
  352. CONFIG_SCSI_MULTI_LUN=y
  353. CONFIG_SCSI_CONSTANTS=y
  354. # CONFIG_SCSI_LOGGING is not set
  356. #
  357. # SCSI low-level drivers
  358. #
  359. # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
  360. # CONFIG_SCSI_7000FASST is not set
  361. # CONFIG_SCSI_ACARD is not set
  362. # CONFIG_SCSI_AHA152X is not set
  363. # CONFIG_SCSI_AHA1542 is not set
  364. # CONFIG_SCSI_AHA1740 is not set
  365. # CONFIG_SCSI_AACRAID is not set
  366. # CONFIG_SCSI_AIC7XXX is not set
  367. # CONFIG_SCSI_AIC7XXX_OLD is not set
  368. # CONFIG_SCSI_DPT_I2O is not set
  369. # CONFIG_SCSI_ADVANSYS is not set
  370. # CONFIG_SCSI_IN2000 is not set
  371. # CONFIG_SCSI_AM53C974 is not set
  372. # CONFIG_SCSI_MEGARAID is not set
  373. # CONFIG_SCSI_BUSLOGIC is not set
  374. # CONFIG_SCSI_CPQFCTS is not set
  375. # CONFIG_SCSI_DMX3191D is not set
  376. # CONFIG_SCSI_DTC3280 is not set
  377. # CONFIG_SCSI_EATA is not set
  378. # CONFIG_SCSI_EATA_DMA is not set
  379. # CONFIG_SCSI_EATA_PIO is not set
  380. # CONFIG_SCSI_FUTURE_DOMAIN is not set
  381. # CONFIG_SCSI_GDTH is not set
  382. # CONFIG_SCSI_GENERIC_NCR5380 is not set
  383. # CONFIG_SCSI_IPS is not set
  384. # CONFIG_SCSI_INITIO is not set
  385. # CONFIG_SCSI_INIA100 is not set
  386. # CONFIG_SCSI_PPA is not set
  387. # CONFIG_SCSI_IMM is not set
  388. # CONFIG_SCSI_NCR53C406A is not set
  389. # CONFIG_SCSI_NCR53C7xx is not set
  390. # CONFIG_SCSI_SYM53C8XX_2 is not set
  391. # CONFIG_SCSI_NCR53C8XX is not set
  392. # CONFIG_SCSI_SYM53C8XX is not set
  393. # CONFIG_SCSI_PAS16 is not set
  394. # CONFIG_SCSI_PCI2000 is not set
  395. # CONFIG_SCSI_PCI2220I is not set
  396. # CONFIG_SCSI_PSI240I is not set
  397. # CONFIG_SCSI_QLOGIC_FAS is not set
  398. # CONFIG_SCSI_QLOGIC_ISP is not set
  399. # CONFIG_SCSI_QLOGIC_FC is not set
  400. # CONFIG_SCSI_QLOGIC_1280 is not set
  401. # CONFIG_SCSI_SEAGATE is not set
  402. # CONFIG_SCSI_SIM710 is not set
  403. # CONFIG_SCSI_SYM53C416 is not set
  404. # CONFIG_SCSI_DC390T is not set
  405. # CONFIG_SCSI_T128 is not set
  406. # CONFIG_SCSI_U14_34F is not set
  407. # CONFIG_SCSI_ULTRASTOR is not set
  408. # CONFIG_SCSI_DEBUG is not set
  410. #
  411. # PCMCIA SCSI adapter support
  412. #
  413. # CONFIG_SCSI_PCMCIA is not set
  415. #
  416. # Fusion MPT device support
  417. #
  418. # CONFIG_FUSION is not set
  419. # CONFIG_FUSION_BOOT is not set
  420. # CONFIG_FUSION_ISENSE is not set
  421. # CONFIG_FUSION_CTL is not set
  422. # CONFIG_FUSION_LAN is not set
  424. #
  425. # IEEE 1394 (FireWire) support (EXPERIMENTAL)
  426. #
  427. # CONFIG_IEEE1394 is not set
  429. #
  430. # I2O device support
  431. #
  432. # CONFIG_I2O is not set
  433. # CONFIG_I2O_PCI is not set
  434. # CONFIG_I2O_BLOCK is not set
  435. # CONFIG_I2O_LAN is not set
  436. # CONFIG_I2O_SCSI is not set
  437. # CONFIG_I2O_PROC is not set
  439. #
  440. # Network device support
  441. #
  442. CONFIG_NETDEVICES=y
  444. #
  445. # ARCnet devices
  446. #
  447. # CONFIG_ARCNET is not set
  448. CONFIG_DUMMY=m
  449. # CONFIG_BONDING is not set
  450. # CONFIG_EQUALIZER is not set
  451. # CONFIG_TUN is not set
  452. # CONFIG_ETHERTAP is not set
  454. #
  455. # Ethernet (10 or 100Mbit)
  456. #
  457. CONFIG_NET_ETHERNET=y
  458. # CONFIG_SUNLANCE is not set
  459. # CONFIG_HAPPYMEAL is not set
  460. # CONFIG_SUNBMAC is not set
  461. # CONFIG_SUNQE is not set
  462. # CONFIG_SUNGEM is not set
  463. # CONFIG_NET_VENDOR_3COM is not set
  464. # CONFIG_LANCE is not set
  465. # CONFIG_NET_VENDOR_SMC is not set
  466. # CONFIG_NET_VENDOR_RACAL is not set
  467. # CONFIG_AT1700 is not set
  468. # CONFIG_DEPCA is not set
  469. # CONFIG_HP100 is not set
  470. # CONFIG_NET_ISA is not set
  471. CONFIG_NET_PCI=y
  472. # CONFIG_PCNET32 is not set
  473. # CONFIG_ADAPTEC_STARFIRE is not set
  474. # CONFIG_AC3200 is not set
  475. # CONFIG_APRICOT is not set
  476. # CONFIG_CS89x0 is not set
  477. # CONFIG_TULIP is not set
  478. # CONFIG_DE4X5 is not set
  479. # CONFIG_DGRS is not set
  480. # CONFIG_DM9102 is not set
  481. # CONFIG_EEPRO100 is not set
  482. # CONFIG_E100 is not set
  483. # CONFIG_LNE390 is not set
  484. # CONFIG_FEALNX is not set
  485. # CONFIG_NATSEMI is not set
  486. # CONFIG_NE2K_PCI is not set
  487. # CONFIG_NE3210 is not set
  488. # CONFIG_ES3210 is not set
  489. # CONFIG_8139CP is not set
  490. CONFIG_8139TOO=y
  491. # CONFIG_8139TOO_PIO is not set
  492. # CONFIG_8139TOO_TUNE_TWISTER is not set
  493. # CONFIG_8139TOO_8129 is not set
  494. # CONFIG_8139_OLD_RX_RESET is not set
  495. # CONFIG_SIS900 is not set
  496. # CONFIG_EPIC100 is not set
  497. # CONFIG_SUNDANCE is not set
  498. # CONFIG_SUNDANCE_MMIO is not set
  499. # CONFIG_TLAN is not set
  500. # CONFIG_TC35815 is not set
  501. # CONFIG_VIA_RHINE is not set
  502. # CONFIG_VIA_RHINE_MMIO is not set
  503. # CONFIG_WINBOND_840 is not set
  504. # CONFIG_NET_POCKET is not set
  506. #
  507. # Ethernet (1000 Mbit)
  508. #
  509. # CONFIG_ACENIC is not set
  510. # CONFIG_DL2K is not set
  511. # CONFIG_E1000 is not set
  512. # CONFIG_MYRI_SBUS is not set
  513. # CONFIG_NS83820 is not set
  514. # CONFIG_HAMACHI is not set
  515. # CONFIG_YELLOWFIN is not set
  516. # CONFIG_SK98LIN is not set
  517. # CONFIG_TIGON3 is not set
  518. # CONFIG_FDDI is not set
  519. # CONFIG_HIPPI is not set
  520. # CONFIG_PLIP is not set
  521. CONFIG_PPP=m
  522. # CONFIG_PPP_MULTILINK is not set
  523. CONFIG_PPP_FILTER=y
  524. CONFIG_PPP_ASYNC=m
  525. CONFIG_PPP_SYNC_TTY=m
  526. CONFIG_PPP_DEFLATE=m
  527. CONFIG_PPP_BSDCOMP=m
  528. # CONFIG_PPPOE is not set
  529. # CONFIG_SLIP is not set
  531. #
  532. # Wireless LAN (non-hamradio)
  533. #
  534. # CONFIG_NET_RADIO is not set
  536. #
  537. # Token Ring devices
  538. #
  539. # CONFIG_TR is not set
  540. # CONFIG_NET_FC is not set
  541. # CONFIG_RCPCI is not set
  542. # CONFIG_SHAPER is not set
  544. #
  545. # Wan interfaces
  546. #
  547. # CONFIG_WAN is not set
  549. #
  550. # PCMCIA network device support
  551. #
  552. # CONFIG_NET_PCMCIA is not set
  554. #
  555. # Amateur Radio support
  556. #
  557. # CONFIG_HAMRADIO is not set
  559. #
  560. # IrDA (infrared) support
  561. #
  562. # CONFIG_IRDA is not set
  564. #
  565. # ISDN subsystem
  566. #
  567. # CONFIG_ISDN is not set
  569. #
  570. # Old CD-ROM drivers (not SCSI, not IDE)
  571. #
  572. # CONFIG_CD_NO_IDESCSI is not set
  574. #
  575. # Input core support
  576. #
  577. CONFIG_INPUT=m
  578. CONFIG_INPUT_KEYBDEV=m
  579. CONFIG_INPUT_MOUSEDEV=m
  580. CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
  581. CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
  582. # CONFIG_INPUT_JOYDEV is not set
  583. # CONFIG_INPUT_EVDEV is not set
  585. #
  586. # Character devices
  587. #
  588. CONFIG_VT=y
  589. CONFIG_VT_CONSOLE=y
  590. CONFIG_SERIAL=y
  591. # CONFIG_SERIAL_CONSOLE is not set
  592. # CONFIG_SERIAL_EXTENDED is not set
  593. # CONFIG_SERIAL_NONSTANDARD is not set
  594. CONFIG_UNIX98_PTYS=y
  595. CONFIG_UNIX98_PTY_COUNT=256
  596. CONFIG_PRINTER=m
  597. # CONFIG_LP_CONSOLE is not set
  598. # CONFIG_PPDEV is not set
  600. #
  601. # I2C support
  602. #
  603. # CONFIG_I2C is not set
  605. #
  606. # Mice
  607. #
  608. # CONFIG_BUSMOUSE is not set
  609. CONFIG_MOUSE=m
  610. CONFIG_PSMOUSE=y
  611. # CONFIG_82C710_MOUSE is not set
  612. # CONFIG_PC110_PAD is not set
  613. # CONFIG_MK712_MOUSE is not set
  615. #
  616. # Joysticks
  617. #
  618. # CONFIG_INPUT_GAMEPORT is not set
  619. # CONFIG_INPUT_NS558 is not set
  620. # CONFIG_INPUT_LIGHTNING is not set
  621. # CONFIG_INPUT_PCIGAME is not set
  622. # CONFIG_INPUT_CS461X is not set
  623. # CONFIG_INPUT_EMU10K1 is not set
  624. # CONFIG_INPUT_SERIO is not set
  625. # CONFIG_INPUT_SERPORT is not set
  626. # CONFIG_INPUT_ANALOG is not set
  627. # CONFIG_INPUT_A3D is not set
  628. # CONFIG_INPUT_ADI is not set
  629. # CONFIG_INPUT_COBRA is not set
  630. # CONFIG_INPUT_GF2K is not set
  631. # CONFIG_INPUT_GRIP is not set
  632. # CONFIG_INPUT_INTERACT is not set
  633. # CONFIG_INPUT_TMDC is not set
  634. # CONFIG_INPUT_SIDEWINDER is not set
  635. # CONFIG_INPUT_IFORCE_USB is not set
  636. # CONFIG_INPUT_IFORCE_232 is not set
  637. # CONFIG_INPUT_WARRIOR is not set
  638. # CONFIG_INPUT_MAGELLAN is not set
  639. # CONFIG_INPUT_SPACEORB is not set
  640. # CONFIG_INPUT_SPACEBALL is not set
  641. # CONFIG_INPUT_STINGER is not set
  642. # CONFIG_INPUT_DB9 is not set
  643. # CONFIG_INPUT_GAMECON is not set
  644. # CONFIG_INPUT_TURBOGRAFX is not set
  645. # CONFIG_QIC02_TAPE is not set
  647. #
  648. # Watchdog Cards
  649. #
  650. # CONFIG_WATCHDOG is not set
  651. # CONFIG_AMD_RNG is not set
  652. # CONFIG_INTEL_RNG is not set
  653. # CONFIG_AMD_PM768 is not set
  654. # CONFIG_NVRAM is not set
  655. # CONFIG_RTC is not set
  656. # CONFIG_DTLK is not set
  657. # CONFIG_R3964 is not set
  658. # CONFIG_APPLICOM is not set
  659. # CONFIG_SONYPI is not set
  661. #
  662. # Ftape, the floppy tape device driver
  663. #
  664. # CONFIG_FTAPE is not set
  665. CONFIG_AGP=m
  666. # CONFIG_AGP_INTEL is not set
  667. # CONFIG_AGP_I810 is not set
  668. CONFIG_AGP_VIA=y
  669. # CONFIG_AGP_AMD is not set
  670. CONFIG_AGP_AMD_8151=y
  671. # CONFIG_AGP_SIS is not set
  672. # CONFIG_AGP_ALI is not set
  673. # CONFIG_AGP_SWORKS is not set
  674. # CONFIG_DRM is not set
  676. #
  677. # PCMCIA character devices
  678. #
  679. # CONFIG_PCMCIA_SERIAL_CS is not set
  680. # CONFIG_SYNCLINK_CS is not set
  681. # CONFIG_MWAVE is not set
  683. #
  684. # Multimedia devices
  685. #
  686. # CONFIG_VIDEO_DEV is not set
  688. #
  689. # File systems
  690. #
  691. # CONFIG_QUOTA is not set
  692. # CONFIG_AUTOFS_FS is not set
  693. CONFIG_AUTOFS4_FS=y
  694. # CONFIG_REISERFS_FS is not set
  695. # CONFIG_REISERFS_CHECK is not set
  696. # CONFIG_REISERFS_PROC_INFO is not set
  697. # CONFIG_ADFS_FS is not set
  698. # CONFIG_ADFS_FS_RW is not set
  699. # CONFIG_AFFS_FS is not set
  700. # CONFIG_HFS_FS is not set
  701. # CONFIG_BEFS_FS is not set
  702. # CONFIG_BEFS_DEBUG is not set
  703. # CONFIG_BFS_FS is not set
  704. CONFIG_EXT3_FS=y
  705. CONFIG_JBD=y
  706. # CONFIG_JBD_DEBUG is not set
  707. CONFIG_FAT_FS=m
  708. CONFIG_MSDOS_FS=m
  709. # CONFIG_UMSDOS_FS is not set
  710. CONFIG_VFAT_FS=m
  711. # CONFIG_EFS_FS is not set
  712. # CONFIG_JFFS_FS is not set
  713. # CONFIG_JFFS2_FS is not set
  714. CONFIG_CRAMFS=m
  715. CONFIG_TMPFS=y
  716. CONFIG_RAMFS=y
  717. CONFIG_ISO9660_FS=m
  718. CONFIG_JOLIET=y
  719. CONFIG_ZISOFS=y
  720. # CONFIG_JFS_FS is not set
  721. # CONFIG_JFS_DEBUG is not set
  722. # CONFIG_JFS_STATISTICS is not set
  723. # CONFIG_MINIX_FS is not set
  724. # CONFIG_VXFS_FS is not set
  725. # CONFIG_NTFS_FS is not set
  726. # CONFIG_NTFS_RW is not set
  727. # CONFIG_HPFS_FS is not set
  728. CONFIG_PROC_FS=y
  729. # CONFIG_DEVFS_FS is not set
  730. # CONFIG_DEVFS_MOUNT is not set
  731. # CONFIG_DEVFS_DEBUG is not set
  732. CONFIG_DEVPTS_FS=y
  733. # CONFIG_QNX4FS_FS is not set
  734. # CONFIG_QNX4FS_RW is not set
  735. # CONFIG_ROMFS_FS is not set
  736. CONFIG_EXT2_FS=y
  737. # CONFIG_SYSV_FS is not set
  738. CONFIG_UDF_FS=m
  739. # CONFIG_UDF_RW is not set
  740. # CONFIG_UFS_FS is not set
  741. # CONFIG_UFS_FS_WRITE is not set
  743. #
  744. # Network File Systems
  745. #
  746. # CONFIG_CODA_FS is not set
  747. # CONFIG_INTERMEZZO_FS is not set
  748. CONFIG_NFS_FS=m
  749. # CONFIG_NFS_V3 is not set
  750. # CONFIG_ROOT_NFS is not set
  751. CONFIG_NFSD=m
  752. # CONFIG_NFSD_V3 is not set
  753. # CONFIG_NFSD_TCP is not set
  754. CONFIG_SUNRPC=m
  755. CONFIG_LOCKD=m
  756. CONFIG_SMB_FS=m
  757. # CONFIG_SMB_NLS_DEFAULT is not set
  758. # CONFIG_NCP_FS is not set
  759. # CONFIG_NCPFS_PACKET_SIGNING is not set
  760. # CONFIG_NCPFS_IOCTL_LOCKING is not set
  761. # CONFIG_NCPFS_STRONG is not set
  762. # CONFIG_NCPFS_NFS_NS is not set
  763. # CONFIG_NCPFS_OS2_NS is not set
  764. # CONFIG_NCPFS_SMALLDOS is not set
  765. # CONFIG_NCPFS_NLS is not set
  766. # CONFIG_NCPFS_EXTRAS is not set
  767. CONFIG_ZISOFS_FS=m
  769. #
  770. # Partition Types
  771. #
  772. # CONFIG_PARTITION_ADVANCED is not set
  773. CONFIG_MSDOS_PARTITION=y
  774. CONFIG_SMB_NLS=y
  775. CONFIG_NLS=y
  777. #
  778. # Native Language Support
  779. #
  780. CONFIG_NLS_DEFAULT="iso8859-15"
  781. # CONFIG_NLS_CODEPAGE_437 is not set
  782. # CONFIG_NLS_CODEPAGE_737 is not set
  783. # CONFIG_NLS_CODEPAGE_775 is not set
  784. CONFIG_NLS_CODEPAGE_850=m
  785. # CONFIG_NLS_CODEPAGE_852 is not set
  786. # CONFIG_NLS_CODEPAGE_855 is not set
  787. # CONFIG_NLS_CODEPAGE_857 is not set
  788. # CONFIG_NLS_CODEPAGE_860 is not set
  789. # CONFIG_NLS_CODEPAGE_861 is not set
  790. # CONFIG_NLS_CODEPAGE_862 is not set
  791. # CONFIG_NLS_CODEPAGE_863 is not set
  792. # CONFIG_NLS_CODEPAGE_864 is not set
  793. # CONFIG_NLS_CODEPAGE_865 is not set
  794. # CONFIG_NLS_CODEPAGE_866 is not set
  795. # CONFIG_NLS_CODEPAGE_869 is not set
  796. # CONFIG_NLS_CODEPAGE_936 is not set
  797. # CONFIG_NLS_CODEPAGE_950 is not set
  798. # CONFIG_NLS_CODEPAGE_932 is not set
  799. # CONFIG_NLS_CODEPAGE_949 is not set
  800. # CONFIG_NLS_CODEPAGE_874 is not set
  801. # CONFIG_NLS_ISO8859_8 is not set
  802. # CONFIG_NLS_CODEPAGE_1250 is not set
  803. # CONFIG_NLS_CODEPAGE_1251 is not set
  804. CONFIG_NLS_ISO8859_1=m
  805. # CONFIG_NLS_ISO8859_2 is not set
  806. # CONFIG_NLS_ISO8859_3 is not set
  807. # CONFIG_NLS_ISO8859_4 is not set
  808. # CONFIG_NLS_ISO8859_5 is not set
  809. # CONFIG_NLS_ISO8859_6 is not set
  810. # CONFIG_NLS_ISO8859_7 is not set
  811. # CONFIG_NLS_ISO8859_9 is not set
  812. # CONFIG_NLS_ISO8859_13 is not set
  813. # CONFIG_NLS_ISO8859_14 is not set
  814. CONFIG_NLS_ISO8859_15=m
  815. # CONFIG_NLS_KOI8_R is not set
  816. # CONFIG_NLS_KOI8_U is not set
  817. CONFIG_NLS_UTF8=m
  819. #
  820. # Console drivers
  821. #
  822. CONFIG_VGA_CONSOLE=y
  823. # CONFIG_VIDEO_SELECT is not set
  824. # CONFIG_MDA_CONSOLE is not set
  826. #
  827. # Frame-buffer support
  828. #
  829. # CONFIG_FB is not set
  831. #
  832. # Sound
  833. #
  834. CONFIG_SOUND=m
  835. # CONFIG_SOUND_ALI5455 is not set
  836. # CONFIG_SOUND_BT878 is not set
  837. # CONFIG_SOUND_CMPCI is not set
  838. # CONFIG_SOUND_EMU10K1 is not set
  839. # CONFIG_MIDI_EMU10K1 is not set
  840. # CONFIG_SOUND_FUSION is not set
  841. # CONFIG_SOUND_CS4281 is not set
  842. # CONFIG_SOUND_ES1370 is not set
  843. # CONFIG_SOUND_ES1371 is not set
  844. # CONFIG_SOUND_ESSSOLO1 is not set
  845. # CONFIG_SOUND_MAESTRO is not set
  846. # CONFIG_SOUND_MAESTRO3 is not set
  847. # CONFIG_SOUND_FORTE is not set
  848. # CONFIG_SOUND_ICH is not set
  849. # CONFIG_SOUND_RME96XX is not set
  850. # CONFIG_SOUND_SONICVIBES is not set
  851. # CONFIG_SOUND_TRIDENT is not set
  852. # CONFIG_SOUND_MSNDCLAS is not set
  853. # CONFIG_SOUND_MSNDPIN is not set
  854. CONFIG_SOUND_VIA82CXXX=m
  855. CONFIG_MIDI_VIA82CXXX=y
  856. # CONFIG_SOUND_OSS is not set
  857. # CONFIG_SOUND_TVMIXER is not set
  859. #
  860. # USB support
  861. #
  862. CONFIG_USB=m
  863. # CONFIG_USB_DEBUG is not set
  864. CONFIG_USB_DEVICEFS=y
  865. # CONFIG_USB_BANDWIDTH is not set
  866. # CONFIG_USB_LONG_TIMEOUT is not set
  867. # CONFIG_USB_EHCI_HCD is not set
  868. # CONFIG_USB_UHCI is not set
  869. CONFIG_USB_UHCI_ALT=m
  870. # CONFIG_USB_OHCI is not set
  871. # CONFIG_USB_AUDIO is not set
  872. # CONFIG_USB_EMI26 is not set
  873. # CONFIG_USB_BLUETOOTH is not set
  874. # CONFIG_USB_MIDI is not set
  875. CONFIG_USB_STORAGE=m
  876. # CONFIG_USB_STORAGE_DEBUG is not set
  877. # CONFIG_USB_STORAGE_DATAFAB is not set
  878. # CONFIG_USB_STORAGE_FREECOM is not set
  879. # CONFIG_USB_STORAGE_ISD200 is not set
  880. # CONFIG_USB_STORAGE_DPCM is not set
  881. # CONFIG_USB_STORAGE_HP8200e is not set
  882. # CONFIG_USB_STORAGE_SDDR09 is not set
  883. # CONFIG_USB_STORAGE_SDDR55 is not set
  884. # CONFIG_USB_STORAGE_JUMPSHOT is not set
  885. # CONFIG_USB_ACM is not set
  886. CONFIG_USB_PRINTER=m
  887. CONFIG_USB_HID=m
  888. CONFIG_USB_HIDINPUT=y
  889. # CONFIG_USB_HIDDEV is not set
  890. CONFIG_USB_KBD=m
  891. CONFIG_USB_MOUSE=m
  892. # CONFIG_USB_AIPTEK is not set
  893. # CONFIG_USB_WACOM is not set
  894. # CONFIG_USB_DC2XX is not set
  895. # CONFIG_USB_MDC800 is not set
  896. CONFIG_USB_SCANNER=m
  897. # CONFIG_USB_MICROTEK is not set
  898. # CONFIG_USB_HPUSBSCSI is not set
  899. # CONFIG_USB_PEGASUS is not set
  900. # CONFIG_USB_RTL8150 is not set
  901. # CONFIG_USB_KAWETH is not set
  902. # CONFIG_USB_CATC is not set
  903. # CONFIG_USB_CDCETHER is not set
  904. # CONFIG_USB_USBNET is not set
  905. # CONFIG_USB_USS720 is not set
  907. #
  908. # USB Serial Converter support
  909. #
  910. # CONFIG_USB_SERIAL is not set
  911. # CONFIG_USB_RIO500 is not set
  912. # CONFIG_USB_AUERSWALD is not set
  913. # CONFIG_USB_TIGL is not set
  914. # CONFIG_USB_BRLVGER is not set
  915. # CONFIG_USB_LCD is not set
  917. #
  918. # Bluetooth support
  919. #
  920. # CONFIG_BLUEZ is not set
  922. #
  923. # Kernel hacking
  924. #
  925. # CONFIG_DEBUG_KERNEL is not set
  927. #
  928. # Library routines
  929. #
  930. CONFIG_ZLIB_INFLATE=m
  931. CONFIG_ZLIB_DEFLATE=m


Message édité par Goon le 23-04-2003 à 10:31:37
Reply

Marsh Posté le 23-04-2003 à 10:30:14    

avant tout, il faut que tu installes les sources de ton noyau : urpmi kernel-source et que tu regarde si l'ACPI n'est pas déjà dedans (les noyaux MDK sont pas mal patchés).
 
évite make menuconfig, il plante quand tu essayes de configurer ALSA


Message édité par Mjules le 23-04-2003 à 10:30:27

---------------
Celui qui pose une question est idiot 5 minutes. Celui qui n'en pose pas le reste toute sa vie. |  Membre du grand complot pharmaceutico-médico-scientifico-judéo-maçonnique.
Reply

Marsh Posté le 26-04-2003 à 11:33:04    

bon je dois vraiment etre nul pasque j'y arrive tjr pas.... :(
 
d'apres ce que j'ai compris les fichier de mon kernel se trouverais dans /boot
 
 c'est juste ou pas ?
 
 sinon meme dans ce dossier quand je fais un make xconfig j'ai droit au meme mess d'erreur:
 
 make: *** Pas de règle pour fabriquer la cible « xconfig ». Arrêt.
 
 qu'est ce que je fais de mal ??? :(

Reply

Marsh Posté le 26-04-2003 à 11:33:04   

Reply

Marsh Posté le 26-04-2003 à 12:07:47    

les fichiers sources du noyaux sont dans /usr/src/version_du_noyau
 
c'est là dedans qu'il faut faire le make xconfig  
 
pour installer les sources du noyau Mandrake (qui est déjà pas mal patché donc peut-être avec l'ACPI), urpmi kernel-sources
 
sinon, télécharges des sources officielles sur www.kernel.org
 
pour facilement recompiler un noyau, Mandrake a fait une doc très bien que tu trouveras dansle manuel de référence en ligne de commande, rubrique installation d'un nouveau noyau


---------------
Celui qui pose une question est idiot 5 minutes. Celui qui n'en pose pas le reste toute sa vie. |  Membre du grand complot pharmaceutico-médico-scientifico-judéo-maçonnique.
Reply

Marsh Posté le 26-04-2003 à 12:08:39    

Bon on va tout reprendre en détails, j'espère que l'arborescence de la Mandrake correspond à celle de la Debian. Au besoin, un Mandrakeu confirmera.
 
On va repartir from scratch, ça sera peut-être plus simple. On a besoin des fichiers suivants :
les sources du noyau linux 2.4.20  http://kernel.org/pub/linux/kernel [...] 20.tar.bz2  
le patch pour l'acpi  http://prdownloads.sourceforge.net [...] z?download  
 
Télécharge tout ça, passe en root et met ces fichiers dans /usr/src/
Va dans ce répertoire
 
On extraie le noyau avec
tar xjvf linux-2.4.20.tar.bz2
qui crée un répertoire linux-2.4.20
 
Maintenant on applique le patch ACPI
Va dans linux-2.4.20, copie le fichier patch-acpi-je-sais-plus-son-nom.gz dans ce répertoire et décompresse le avec
gunzip patch-acpi-je-sais-plus-son-nom.gz
Maintenant on applique le patch ACPI avec patch -p1 < patch-acpi-je-sais-plus-son-nom
 
OK, le noyau est près à être compilé. Récompère mon fichier de config plus haut dans le post et appelle-le config.2.4.20acpi
make menuconfig
Tu choisis en bas Load alternate configuration file et tu lui indiques ce fichier. Tu quittes en sauvant et
make dep && make clean && make bzImage && make modules && make modules_install
va compiler le noyau avec le support de l'ACPI.
 
Ne reste plus qu'à lui indiquer comment booter dessus
On copie les fichiers générés dans /boot
cp config-2.4.20acpi /boot/
cp System.map /boot/Systam.map-2.4.20acpi
cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.20acpi
 
Allez maintenant on configure lilo et c'est fini. Sous Debian le fichier de config est /etc/lilo.conf Edite-le (toujours en root)
et vers la fin du fichier tu rajoutes les lignes
image=/boot/vmlinuz-2.4.20acpi
  label=2.4.20acpi
 
Un petit "lilo" en root à la ligne de commande et tu peux rebooter en choisissant le 2.4.20acpi.
 
Ouf ! Bien sûr pour tout ça tu as besoin de make, patch, gcc, gunzip, etc. J'espère que ça ira  ;)

Reply

Marsh Posté le 26-04-2003 à 12:10:50    

L'acpi est déjà compilé dans le noyau de la Mandrake.
Simplement, il faut aussi activer l'acpi dans lilo : édite /etc/lilo.conf et remplace acpi=off par acpi=on
Ensuite relance lilo avec 'lilo'.


Message édité par zeb_ le 26-04-2003 à 12:11:45
Reply

Marsh Posté le 26-04-2003 à 12:13:15    

zeb_ a écrit :

L'acpi est déjà compilé dans le noyau de la Mandrake.
Simplement, il faut aussi activer l'acpi dans lilo : édite /etc/lilo.conf et remplace acpi=off par acpi=on
Ensuite relance lilo avec 'lilo'.

Arf bah si c'est que ça, c'est beaucoup plus simple effectivement...

Reply

Marsh Posté le 26-04-2003 à 14:02:15    

j'e l'avais vu ca et je l'ai deja changer le off en on mais c'est tjrs pareil.....
 
donc now je vais suivre les instructions a la lettre en esperant que ca foire pas ^^

Reply

Marsh Posté le 26-04-2003 à 14:11:46    

stim a écrit :

j'e l'avais vu ca et je l'ai deja changer le off en on mais c'est tjrs pareil.....
 
donc now je vais suivre les instructions a la lettre en esperant que ca foire pas ^^

Ouais la première fois ça fait un peu peur mais une fois compris ce qu'on fait, on peut plus s'en passer  :D

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed