kdelibs-common = 30000000:3.2.3-105.1.1.101mdk est nécessaire pour ...

Using vt7
 
(WW) NV(0): Failed to set up wite-combining (range 0xdc00000,0x100000000)
 
waiting for X server to shut down

XFDrake
Une erreur est survenue
essayer de changer les paramètres

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
 
Section "Module"
    # This loads the DBE extension module.
     
    Load "dbe"   # Double buffer extension
     
    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"
    Load "freetype"
     
    # Load        "xtt"
     
    # This loads the GLX module
    # Load       "glx"
    # This loads the DRI module
    # Load       "dri"
    Load "glx" # 3D layer
    Load "/usr/X11R6/lib/modules/extensions/libglx.a"
     
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
     
    Subsection "extmod"
        Option "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubsection
EndSection
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db" ).  There is normally
    # no need to change the default.
     
    RgbPath "/usr/X11R6/lib/X11/rgb"
     
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #
     
    # FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
     
    # FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
     
    # FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    # FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
     
    # The module search path.  The default path is shown here.
     
    # ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
    EndSection
# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
# Option "NoTrapSignals"
 
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.
 
# Option "DontVTSwitch"
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
# Option "DontZap"
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
 
# Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
# Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client.
 
# Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
 
# Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
# Option "AllowNonLocalModInDev"
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
    Identifier "Keyboard1"
    Driver "keyboard"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
     
    # For most OSs the protocol can be omitted (it defaults to "Standard" ).
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
     
    # Option     "Protocol"      "Xqueue"
     
    Option "AutoRepeat" "500 30"
    Option "XkbOptions" ""
     
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds"      "1 2 3"
     
    # Option "LeftAlt"     "Meta"
    # Option "RightAlt"    "ModeShift"
     
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel"    "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel"    "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout"   "de"
    # or:
    # Option "XkbLayout"   "de"
    # Option "XkbVariant"  "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions"  "ctrl:swapcaps"
     
    # These are the default XKB settings for X.Org
    # Option "XkbRules"    "__XKBDEFRULES__"
    # Option "XkbModel"    "pc101"
    # Option "XkbLayout"   "us"
    # Option "XkbVariant"  ""
    # Option "XkbOptions"  ""
     
    # Option "XkbDisable"
     
    Option "XkbRules" "xorg"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
    # Identifier and driver
     
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/psaux"
    # Mouse-speed setting for PS/2 mouse.
     
    # Option "Resolution" "256"
     
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
     
    # Option "Protocol" "Xqueue"
     
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
     
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
     
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
     
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout"    "50"
     
    # ChordMiddle is an option for some 3-button Logitech mice
     
    # Option "ChordMiddle"
EndSection
 
Section "Monitor"
    Identifier "monitor1"
    VendorName "Delta"
    ModelName "Delta DA-570"
    HorizSync 30-70
    VertRefresh 50-100
     
    # Sony Vaio C1(X,XS,VE,VN)?
    # 1024x480 @ 85.6 Hz, 48 kHz hsync
    ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
     
    # Dell D800 and few Inspiron (16/10) 1280x800
    ModeLine "1280x800"  147.89  1280 1376 1512 1744  800 801 804 848
     
    # Dell D800 and few Inspiron (16/10) 1680x1050
    ModeLine "1680x1050"  214.51  1680 1800 1984 2288  1050 1051 1054 1103
     
    # Dell D800 and few Inspiron (16/10) 1920x1200
    ModeLine "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync
     
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
     
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection
 
Section "Device"
    Identifier "device1"
    VendorName "nVidia Corp."
    BoardName "RIVA TNT"
    Driver "nv"
    Option "DPMS"
EndSection
 
Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 16
     
    Subsection "Display"
        Depth 8
        Virtual 1024 768
    EndSubsection
     
    Subsection "Display"
        Depth 15
        Virtual 1024 768
    EndSubsection
     
    Subsection "Display"
        Depth 16
        Virtual 1024 768
    EndSubsection
     
    Subsection "Display"
        Depth 24
        Virtual 1024 768
    EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
     
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
     
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    Screen "screen1"
EndSection

(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 135962511)

 Load "glx" # 3D layer
    Load "/usr/X11R6/lib/modules/extensions/libglx.a"

(WW) NV(0): Failed to set up wite-combining (range 0xdc00000,0x100000000)

(--) NV(0): Linear framebuffer at 0xDC000000
(--) NV(0): MMIO registers at 0xDE000000