Can't locate module snd-card-1, Can't locate module ... [résolu]

Can't locate module snd-card-1, Can't locate module ... [résolu] - Multimédia - Linux et OS Alternatifs

Marsh Posté le 16-03-2003 à 00:27:41    

J'ai ça au démarrage et lorsque j'éteins mon PC...
 


Can't locate module snd-card-1
Can't locate module snd-card-2
Can't locate module snd-card-3
Can't locate module snd-card-4
Can't locate module snd-card-5
Can't locate module snd-card-6
Can't locate module snd-card-7


 
 
Voici mon /etc/modules.conf :
 


### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
 
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off            # Unix
# alias net-pf-2 off            # IPv4
# alias net-pf-3 off            # Amateur Radio AX.25
# alias net-pf-4 off            # IPX
# alias net-pf-5 off            # DDP / appletalk
# alias net-pf-6 off            # Amateur Radio NET/ROM
# alias net-pf-9 off            # X.25
# alias net-pf-10 off           # IPv6
# alias net-pf-11 off           # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off           # Acorn Econet
 
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81     bttv
alias char-major-108    ppp_generic
alias /dev/ppp          ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate
 
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3       loop_fish2
alias loop-xfer-gen-10  loop_gen
alias cipher-2          des
alias cipher-3          fish2
alias cipher-4          blowfish
alias cipher-6          idea
alias cipher-7          serp6f
alias cipher-8          mars6
alias cipher-11         rc62
alias cipher-15         dfc2
alias cipher-16         rijndael
alias cipher-17         rc5
 
# Support for i2c and lm_sensors
alias char-major-89    i2c-dev
 
 
### modules-update: end processing /etc/modules.d/aliases
 
### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc,v 1.1 2002/12/21 06:31:52 agenkin Exp $
 
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
 
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
alias snd-card-0 snd-via82xx
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
 
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
 
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
 
# Set this to the correct number of cards.
options snd_cards_limit=1
 
### modules-update: end processing /etc/modules.d/alsa
 
### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
 
alias char-major-10-135 rtc
 
### modules-update: end processing /etc/modules.d/i386
 
### modules-update: start processing /etc/modules.d/nvidia
alias char-major-195 NVdriver
 
### modules-update: end processing /etc/modules.d/nvidia

 
 
 
C'est pas cette ligne qui doit limité à une carte et donc charger juste pour snd0 ? De toute façon elle est correcte en plus ?
 
# Set this to the correct number of cards.
options snd_cards_limit=1
 
 
 
 
 
 :??:


Message édité par Z-Axis le 16-03-2003 à 14:12:07
Reply

Marsh Posté le 16-03-2003 à 00:27:41   

Reply

Marsh Posté le 16-03-2003 à 09:46:40    

:bounce:

Reply

Marsh Posté le 16-03-2003 à 12:31:10    

Mais personne ne sait ?  :??:  :??:

Reply

Marsh Posté le 16-03-2003 à 14:11:37    


### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
 
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off            # Unix
# alias net-pf-2 off            # IPv4
# alias net-pf-3 off            # Amateur Radio AX.25
# alias net-pf-4 off            # IPX
# alias net-pf-5 off            # DDP / appletalk
# alias net-pf-6 off            # Amateur Radio NET/ROM
# alias net-pf-9 off            # X.25
# alias net-pf-10 off           # IPv6
# alias net-pf-11 off           # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off           # Acorn Econet
 
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81     bttv
alias char-major-108    ppp_generic
alias /dev/ppp          ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate
 
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3       loop_fish2
alias loop-xfer-gen-10  loop_gen
alias cipher-2          des
alias cipher-3          fish2
alias cipher-4          blowfish
alias cipher-6          idea
alias cipher-7          serp6f
alias cipher-8          mars6
alias cipher-11         rc62
alias cipher-15         dfc2
alias cipher-16         rijndael
alias cipher-17         rc5
 
# Support for i2c and lm_sensors
alias char-major-89    i2c-dev
 
 
### modules-update: end processing /etc/modules.d/aliases
 
### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc,v 1.1 2002/12/21 06:31:52 agenkin Exp $
 
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
 
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
alias snd-card-0 snd-via82xx
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
 
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
 
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
 
# Set this to the correct number of cards.
options snd cards_limit=1
 
### modules-update: end processing /etc/modules.d/alsa
 
### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
 
### modules-update: end processing /etc/modules.d/i386
 
### modules-update: start processing /etc/modules.d/nvidia
alias char-major-195 NVdriver
 
### modules-update: end processing /etc/modules.d/nvidia

 
 
 
options snd cards_limit=1 != options snd_cards_limit=1  
 
Donc faut faire attention au tiret ;)

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed