salut,  
 
g installé debian recement (enfin installer est un bien gd mot), mais lorsque je tape startx, g une erreur : "screen not found"
ou plus exactemnet, a un endroit c ecrit screen found, but "aucun ne correspond " ou un truc ds le genre, j'men souviens plus exactly
donc je pense ke c paske g pas rentré exactemnet les bonne valeurs pour mon ecran, nan? masi le pb c ke je les ai pas sous la main... mais je pensais ke c t pa grave, puiske lors de l'install a un moment on choisi entre facil, moyen, avancé, et ds les 2 premiers il demande pas les taux de rafraichiessement vertical et horiz, donc il devrait bien s'en passer, en mettant d valeurs "par defaut", nan?
je sais pas si vous m'avez suivi mais en gros j'aimerai bien ne plus avoir cette erreur "screen not found"
merci d'avance

l'écran est mal configuré probablement j'avais le même pb regarde les réglages adaptés à ton écran dans la notice

donc en gros, pas de notice sous la main, pas de linux, c ca?    

bah je sais pas si tu ne trouve pas les caractéristiques tu peux surement te débrouiller mais tant que je ne les avait pas moi j'avais pas réussi
 
tu as essayé de faire une recherche avec google ou sur le site de la marque de ton écran ?

ah, g trouve kkchose, fo ke j'essaie....
mais il vo mieux ke je lance koi pour ca? paske je comprend pas, ya plusieurs trucs ki font pareil....
xf86config, c ca kil fo ke je fasse?

oui je crois et de préférence en mode texte parce que la version garphique est buggée) faut mettre -textmode derrière je crois mais je ne suis absolument pas sûr

g eu le probleme avec ma deb, meme avec xf86cfg ca foirait... g finalement pris un le XF86Config-4 de kkun d'autre, ke g adapté a mon ecran, et rulez... je c tjs pas pkoi le mien foirait... recherche un de mes anciens topic, ca t'en dira peut etre plus

pfffff g essayé, et en fait c t deja bien configuré, sur les bonnes valeurs !!!!!
ce ki est bizarre c ke qd je fais xf86cfg, c une config en mode graphique, donc la il le trouve bien l'ecran !!! enfin bref, ca menerve... je l'ai reconfiguré avec xf86config et evidement c tjrs pareil....

 
le mien aussi semblait bien configuré figure toi... c pas la premiere fois ke je le fais...
 
n'empeche que ca marchait pas et ca a marché avec un autre adapté correctement

oui g bien lu leirn, je comptes bien suivre ton conseil, merci... je precisais juste ca comme ca :-)

 
lance xf86cfg en mode texte (-textmode je crois faut vérifier sinon) chez moi en mode graphique ça ne marchai pas et en mode texte ct bon

ben de toute facon il contient les bonnes valeurs!!!
et g refait avec xf86config....
c apparemnet la mem chose que leirn..... mais o fait leirn, ds le topic ke g lu a ton sujet, t'avais tjrs pas trouvé de soluce... je me trompe?? en tout cas c exactemnet la mem erreur... pffffff....

 
pas tout a fait: g pas trouver pkoi le mien foirait, ms avec l'autre ca marchait, alors g laisser l'autre... ( le mien etait fait avec xf86config)

Bonsoir ...  
 
j'ai exactement le même problème ...
 
 
en installant la debian woody , je rentre directement en mode console et lorsque je tape startx, le message "screen not found"  
m'est retourné ...
 
je refais un dpkg-reconfigure xserver-xfree86 -> même problème.
j'ai essayé un apt-get remove --purge xserver-xfree86 puis apt-get install --reinstall xserver-xfree86 mais rien n'y fait ... toujours le même message d'erreur
 
Avec xf86config, le problème subsiste ...
j'ai essayé de prendre le X86Config posté dans le topic de leirn, mais cela ne change rien
 
ma CG est une Leadtek WinFast GeForce3 TD ...

up siouplait

Xpoulet a écrit a écrit : Bonsoir ...     j'ai exactement le même problème ...     en installant la debian woody , je rentre directement en mode console et lorsque je tape startx, le message "screen not found"   m'est retourné ...   je refais un dpkg-reconfigure xserver-xfree86 -> même problème. j'ai essayé un apt-get remove --purge xserver-xfree86 puis apt-get install --reinstall xserver-xfree86 mais rien n'y fait ... toujours le même message d'erreur   Avec xf86config, le problème subsiste ... j'ai essayé de prendre le X86Config posté dans le topic de leirn, mais cela ne change rien   ma CG est une Leadtek WinFast GeForce3 TD ...

 
le mien ou l'autre?

les 2: le foireu et celui qui à marché par la suite dans le topic ...

Xpoulet a écrit a écrit : les 2: le foireu et celui qui à marché par la suite dans le topic ...

 
tu l'avais adapté a ta situation? (le bon)
tu as nv d'installer?...

 
tu veux dire les drivers Nvidia ?

euh... non en fait,  
 
g changer nvidia par nv en le mettant sur mon pc, et g changer les frequences ecran, c tout...

 
voila, j'ai modifié  
- nvidia en nv
- les fréquences H et V que je connais de mon écran
- j'ai commenté la 2ème souris
 
Mais cela ne change rien.
 
EDIT:La ou je galère un peu est pour la config de ma carte graphique ... une geforce 3 (pas les TI200 ni les TI500) ... je ne la voit pas dans les propositions.
 
Par contre je n'ai pas non plus la souris qui fonctionne (mais je pense qu'elle n'est pas active avant le chargement de startx), donc c'est normal,ça .

 
commenter la deuxiemme souris c pas grave, elle est pas ds screen1 de ttes facons

mince j avais édité

 
alros la j'sé plus

pour la carte graphique j'ai une leadtek winfast mais je ne la trouve pas dans les propositions ... comment je fais pour valider la bonne ?

 
euh... ds winfast, ya win, non? ca pourrait jouer? (ex: winmodem)

désolé mais je n ai pas compris ...
 
quand je lance xf86config on peut accéder à une liste de carte graphique afin de choisir la bonne, et là je ne vois pas ma carte.

Xpoulet a écrit a écrit :   désolé mais je n ai pas compris ...   quand je lance xf86config on peut accéder à une liste de carte graphique afin de choisir la bonne, et là je ne vois pas ma carte.

 
320 si c un gforce

c'est une Leadtek Winfast GeForce 3 -> je privilégie le Geforce dans le choix alors ?

 
c ce ke je ferai a ta place... il me fait peur le winfast

je vais tenter cela .. ^^ merci
je testerais cela demain car je vais    
 
  bonne nuit

'nv' c'est le driver générique d'XFree.
'nvidia' si tu installe les drivers nvidia.
 
La Woody a XFree4.1.x donc pas de pb, tu dois avoir le fichier suivant :
/etc/X11/XF86config-4
Le fichier de log /var/log/XFree.log.0 te dira exactement ce qu'il se passe.
 
Voilà le mien avec les dernier drivers nvidia 3123 :
(Attention c'est long ...)
_______________________________________________
 
# File generated by xf86config.
 
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software" ),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#  
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#  
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#  
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of  
# this file.
# **********************************************************************
 
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
 
# This loads the DBE extension module.
 
    Load        "dbe"   # Double buffer extension
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
#      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
 
# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"
 
# This loads the GLX module
     Load       "glx"
 
# 4 TV
     Load       "v4l"
 
 
     Load       "freetype"
     
EndSection
 
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
 
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db" ).  There is normally
# no need to change the default.
 
    RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#  
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#  
 
     FontPath   "/usr/share/fonts/Truetype/"
     FontPath   "/usr/share/fonts/truetype/xfree86-nonfree"
 
#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
     FontPath   "/usr/X11R6/lib/X11/fonts/truetype/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
 
# The module search path.  The default path is shown here.
 
#    ModulePath "/usr/X11R6/lib/modules"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
# Uncomment this to cause a core dump at the spot where a signal is  
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
#    Option "NoTrapSignals"
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
#    Option "DontZap"
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
 
#    Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
#    Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client.  
 
#    Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.  
 
#    Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
#    Option "AllowNonLocalModInDev"
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier "Keyboard1"
    Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard" ).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
 
#    Option     "Protocol"      "Xqueue"
 
    Option "AutoRepeat" "500 30"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"
 
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
 
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
 
# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "fr"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
 
#    Option "XkbDisable"
 
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
 
EndSection
 
 
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
# Identifier and driver
 
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol"    "IMPS/2"      # Souris à roulette
    Option "Device"      "/dev/psaux"
 
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
 
#    Option "Protocol" "Xqueue"
 
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
 
#    Option "BaudRate" "9600"
#    Option "SampleRate" "150"
 
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    Option "ChordMiddle"
 
# 4 wheel mouse
 
     Option "ZAxisMapping" "4 5"
 
EndSection
 
 
# **********************************************************************
# Other input device sections  
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"  
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
 
    Identifier  "My Monitor"
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
    #HorizSync   31.5 - 82.0
 HorizSync   30-115          #Ecran 19" IIyama
 
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50  # multiple ranges of sync frequencies
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
    #VertRefresh 50-100
 VertRefresh 50-180   # Ecran 19" IIyama
 
EndSection
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
 
# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
 
#    Chipset "generic"
 
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
 
    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
 
#    BusID      "PCI:0:10:0"
 
#    VideoRam 256
 
#    Clocks 25.2 28.3
 
EndSection
 
# Device configured by xf86config:
 
Section "Device"
    Identifier  "NVIDIA GeForce"
    Driver      "nvidia"    #Mettre "nv" si driver XFree
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
 
 
 # adding this option disables AGP
 # a "1" will enable NVidia AGP (default)
       option "NVAgp" "3"    # Lire la doc des drivers Nvidia
 
    Identifier  "Screen 1"
    Device      "NVIDIA GeForce"
    Monitor     "My Monitor"
    DefaultDepth 24
 
    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600"
# "768x576"
        ViewPort    0 0
    EndSubsection
EndSection
 
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
 
# The Identifier line must be present
    Identifier  "Simple Layout"
 
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
 
    Screen "Screen 1"
 
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
 
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
 
EndSection
_______________________________________________________  
 
Pour info, la Sid vient de récupérer XFree 4.2 ce soir.
Ceux qui ont des ATI vont être heureux.

Ca ne marche toujours pas
 
Y a t il quelque chose que je ne comprends pas ?
ce sont mes 1ers pas sous la Debian, mais je ne me décourge pas
 
bon voici mon /var/log/XFree.log.0
 
_______________________________________________________________
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
 
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
 If the server is older than 6-12 months, or if your card is
 newer than the above date, look for a newer version before
 reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]  
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct  7 21:10:49 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(**) Option "XkbVariant" "fr"
(**) XKB: variant: "fr"
(**) Option "XkbOptions" "fr"
(**) XKB: options: "fr"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
 Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
 
(WW) Cannot open APM
(II) Module ABI versions:
 XFree86 ANSI C Emulation: 0.1
 XFree86 Video Driver: 0.4
 XFree86 XInput driver : 0.2
 XFree86 Server Extension : 0.1
 XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008d48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00
(II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 18 class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,3800 rev 10 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0200 card 107d,2860 rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
 [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
 [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
 [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
 [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0 0xdde00000 - 0xdfefffff (0x2100000) MX[B]
(II) Bus 1 prefetchable memory range:
 [0] -1 0 0xd5b00000 - 0xddcfffff (0x8200000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia GeForce3 rev 163, Mem @ 0xde000000/24, 0xd8000000/26, 0xddc80000/19, BIOS @ 0xdfef0000/16
(II) Addressable bus resource ranges are
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
 [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
 [0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
 [1] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
 [2] -1 0 0xddc80000 - 0xddcfffff (0x80000) MX[B](B)
 [3] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
 [4] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
 [5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
 [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [8] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
 [9] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
 [1] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
 [2] -1 0 0xddc80000 - 0xddcfffff (0x80000) MX[B](B)
 [3] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
 [4] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
 [5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
 [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [8] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
 [9] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
 [6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
 [7] -1 0 0xddc80000 - 0xddcfffff (0x80000) MX[B](B)
 [8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
 [9] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
 [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
 [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
 [16] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.1.9
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.13.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.1
 Module class: XFree86 Video Driver
 ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.2
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
 RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
 RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
 Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
 Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
 GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
 GeForce3 (rev 3)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce3 found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
 [6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
 [7] -1 0 0xddc80000 - 0xddcfffff (0x80000) MX[B](B)
 [8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
 [9] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
 [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
 [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
 [16] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
(II) resource ranges after probing:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
 [6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
 [7] -1 0 0xddc80000 - 0xddcfffff (0x80000) MX[B](B)
 [8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
 [9] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
 [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
 [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [18] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
 [19] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
 [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce3"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.4
(**) NV(0): Option "UseFBDev" "true"
(==) NV(0): Using HW cursor
(**) NV(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
 compiled for 4.1.0.1, module version = 0.0.2
 ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "nv"
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(II) UnloadModule: "int10"
(EE) Screen(s) found, but none have a usable configuration.
 
Fatal server error:
no screens found
 
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
 
_________________________________________________________________
 
 
 
et après avoir tapé startx, j'ai aussi ce message
 
 
________________________________________________________________
 
 
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remainig.
________________________________________________________________
 
 
Est ce que cela peut aider quelqu'un à me venir en aide ?
 
merci  

up svp

tu n'aurais pas un module framebuffer tournant sur ta machine ? Si oui, vire le et reteste

 
Visiblement ton fichier de conf d'XFree n'a pas l'air d'être correcte.
XFree charge des modules non utiles :
- dri
- drm
Puis, après chargement du driver 'nv' XFree charge 'fbdevhw' bref du framebuffer.
Dernière ligne intéréssante, XFree trouve ta carte et ton écran mais n'a pas
de configuration correcte.
 
Je te conseille d'installer les drivers 'nvidia' et de modifier le fichier de conf en  
t'inspirant du mien, cela devrait t'aider.

pour les drivers nvidia , je vais sur le site et je prends les GLX et le KERNEL c est bien ca ?

Tu peux chopper les src.deb via apt-get (jamais fait).
Perso, je récupère les tarballs et compile à la mano.
Il te faudras les sources de ton noyau.
 
Si tu veux pas t'ennuyer :
apt-get install nvidia-kernel-src nvidia-glx-src
Tu suis la procédure.