Installation de Glib et GTK : probleme - Linux et OS Alternatifs
Marsh Posté le 26-08-2001 à 05:21:30
moi je conseille chbg. Je l'utilise en ce moment sous xfce et il est compatible E .
http://fr.rpmfind.net/linux/rpm2ht [...] query=chbg
lire ceci avant -> http://perso.wanadoo.fr/linux_wizard/howto_rpm.html
[root@bastard linux]# rpm -qa | grep libglib
libglib1.3_6-1.3.6-6mdk
libglib1.2-1.2.10-2mdk
libglib1.2-devel-1.2.10-2mdk
libglib1.3_6-devel-1.3.6-6mdk
si tu veux compiler des tar.gz qui utilisent glib, ce sont les packages -devel qu'il te faut.
[root@bastard linux]# rpm -qa | grep libgtk+
libgtk+1.2-1.2.10-9mdk
libgtk+2-1.3.6-3mdk
libgtk+1.2-devel-1.2.10-9mdk
libgtk+mdk0.1_6-0.1.6-4mdk
libgtk+mdk0.1_6-devel-0.1.6-4mdk
libgtk+2-devel-1.3.6-3mdk
libgtk+extra0-0.99.15-2mdk
idem pour gtk+ , il faut les -devel
ne met pas n'importe koi sur ton sys sinon tu auras de très mauvaises surprises. Essaie d'utiliser le plus possible des rpm, de préférence des rpm mdk.
this package requires at least version 1.1.11.
juste pour dire que cela devrait marcher avec gtk+1.2
[root@bastard linux]# urpmf glib-config
libglib1.2-devel:/usr/bin/glib-config
libglib1.2-devel:/usr/share/man/man1/glib-config.1.bz2
libglib1.3_6-devel:/usr/bin/glib-config-2.0
http://perso.wanadoo.fr/linux_wiza [...] html#urpmi
[edtdd]--Message édité par Dark_Schneider--[/edtdd]
Marsh Posté le 26-08-2001 à 12:21:26
ok.
me manque donc des librairies :
Citation : |
je les trouve pas :
libgtk+1.2-devel-1.2.10-9mdk
libgtk+2-devel-1.3.6-3mdk
note : le smile qui s'affiche il remplace quels caracteres ?
je suis sur Konkeror, là et sur le forum, je peux pas cliquer sur le smiley ou sur gras par exple pour ajouter le code dans le message.
vous aussi ?
[edtdd]--Message édité par jeep05--[/edtdd]
Marsh Posté le 26-08-2001 à 12:32:15
et ?
> urpmi libglib1.2-devel
> urpmi libgtk+1.2-devel
je te conseille FORTEMENT de relire mon howto rpm.
Marsh Posté le 26-08-2001 à 12:40:24
voila maintenant :
[root@localhost jeep05]# rpm -qa | grep libglib
libglib1.2-devel-1.2.10-1mdk
libglib1.2-1.2.10-1mdk
[root@localhost jeep05]# rpm -qa | grep libgtk+
libgtk+1.2-1.2.10-1mdk
libgtk+1.2-devel-1.2.10-1mdk
[root@localhost jeep05]#
[root@localhost jeep05]# urpmf glib-config
libglib1.2-develusr/bin/glib-config
libglib1.2-develusr/share/man/man1/glib-config.1.bz2
libglib2-develusr/bin/glib-config-2.0
libglib2-develusr/share/man/man1/glib-config-2.0.1.bz2
yen a d'inutile non dans ce qui est en gras non ?
hors sujet :
je suis sur Konkeror, là et sur le forum, je peux pas cliquer sur le smiley ou sur gras par exple pour ajouter le code dans le message.
vous aussi ?
[edtdd]--Message édité par jeep05--[/edtdd]
Marsh Posté le 26-08-2001 à 12:58:14
nous aussi, aucun browser sous linux n'y arrive. va gueuler après Joce.
question : as tu compris ce que faisait urpmf ?
http://perso.wanadoo.fr/linux_wiza [...] html#urpmi
je voudrais que tu m'explique ce que tu as compris concernant urpmf.
Marsh Posté le 26-08-2001 à 13:14:46
Dark_Schneider a écrit a écrit : nous aussi, aucun browser sous linux n'y arrive. va gueuler après Joce. question : as tu compris ce que faisait urpmf ? http://perso.wanadoo.fr/linux_wiza [...] html#urpmi je voudrais que tu m'explique ce que tu as compris concernant urpmf. |
Voilà j'ai bien lu ca, tiré de ton How To :
Avec rpmdrake on peut chercher un package précis qui serait dispo soit dans l'une des sources configurées (CD d'install, ...).
Il permet d'ajouter des packages en prenant en compte les dépendances et cela avec une jolie interface graphique.
ca :
L'autre programme intéressant s'apelle urpmf. Il permet de trouver quel package contient un fichier précis : très utile quand un rpm ne veut pas s'installer car il manque un fichier
ca :
Pour savoir si vous avez un package (installé ou disponible dans une de vos sources de packages configurées), il suffit d'utiliser urpmq
---
ok ca va mieux.
donc :
[root@localhost jeep05]# urpmf glib-config
libglib1.2-develusr/bin/glib-config
libglib1.2-develusr/share/man/man1/glib-config.1.bz2
libglib2-develusr/bin/glib-config-2.0
libglib2-develusr/share/man/man1/glib-config-2.0.1.bz2[root@localhost jeep05]#
ca veut dire que les lib ci dessus sont dispos sur les cd de mandrake (c la seule source qu'il y a de configuré pour les paquetages), c ca ?
donc j'installe celui que je veux...
bon, faisons le point :
[root@localhost jeep05]# rpm -qa | grep libgtk+
libgtk+1.2-1.2.10-1mdk
libgtk+1.2-devel-1.2.10-1mdk
[root@localhost jeep05]# rpm -qa | grep libglib
libglib1.2-devel-1.2.10-1mdk
libglib1.2-1.2.10-1mdk
il manque quoi.
[edtdd]--Message édité par jeep05--[/edtdd]
Marsh Posté le 26-08-2001 à 13:30:53
Il permet de trouver quel package contient un fichier précis
quand tu fais urpmf glib-config il renvoie les packages dont les fichiers contiennent glib-config dans leur nom.
dans ton cas il y a /usr/bin/glib-config et /usr/bin/glib-config-2.0
mais aussi les manpages de glib-config (car ils contiennent le terme glib-config dans leur nom ) : /usr/share/man/man1/glib-config.1.bz2 et /usr/share/man/man1/glib-config-2.0.1.bz2
Marsh Posté le 26-08-2001 à 14:12:03
Dark_Schneider a écrit a écrit : Il permet de trouver quel package contient un fichier précis quand tu fais urpmf glib-config il renvoie les packages dont les fichiers contiennent glib-config dans leur nom. dans ton cas il y a /usr/bin/glib-config et /usr/bin/glib-config-2.0 mais aussi les manpages de glib-config (car ils contiennent le terme glib-config dans leur nom ) : /usr/share/man/man1/glib-config.1.bz2 et /usr/share/man/man1/glib-config-2.0.1.bz2 |
donc sur le dd.
il faut ca :
libglib1.2-devel-1.2.10-2mdk
libglib1.3_6-devel-1.3.6-6mdk
libgtk+1.2-devel-1.2.10-9mdk
libgtk+2-devel-1.3.6-3mdk
j'ai ca :
libglib1.2-devel-1.2.10-1mdk
libglib1.2-1.2.10-1mdk
libgtk+1.2-1.2.10-1mdk
libgtk+1.2-devel-1.2.10-1mdk
Marsh Posté le 26-08-2001 à 15:06:10
> urpmi libglib1.3_6-devel
Marsh Posté le 26-08-2001 à 15:12:27
juste en passant une seul version de glib-devel suffit.
Moi j'en ai plusieurs car je suis sur mandrake cooker, mais toi une seule version suffit.
Marsh Posté le 26-08-2001 à 03:33:16
j'ai besoin d'installer le soft WallP (il change le fond d'écran chaque X minutes)
(au passage, si vous en connaissait un autre, je veux bien)
je cherche un soft du genre de Wallpaper Changer ss Win$$$
voici ce dont il a besoin (tiré du readme) :
------------
2. Requirements.
X11 libraries and headers.
GTK+ v1.1.11 - this is the gimp toolkit, this package requires at least
version 1.1.11. It can be obtained from ftp://ftp.gimp.org/pub/gtk.
Imlib 1.8.1 - image manipulation library, ftp://ftp.enlightenment.org
--------
Prerequisites
=============
GTK+ requires the GLIB library, available at the same location as
you got this package.
-----------------------------------
-----------------------------------
a la fin il dit que la GLIB est pas installé alors que si !
comment je fais ?
note : j'ai pas installé la "lmlib 1.8.1", je l'ai pas trouvé, mais là apparemment c problem entre Glib et Gtk
-----------------------------------
-----------------------------------
[root@localhost glib-1.1.11]# ./configure
loading cache ./config.cache
checking for a BSD compatible install... (cached) /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking host system type... i686-pc-linux-gnu
checking for ranlib... (cached) ranlib
checking for gcc... (cached) gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for ld used by GCC... (cached) /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking whether ln -s works... (cached) yes
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... yes
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking host system type... i686-pc-linux-gnu
checking whether to enable memory checking... no
checking whether to enable memory profiling... no
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for a BSD compatible install... /usr/bin/install -c
checking for extra flags to get ANSI library prototypes... none needed
checking for extra flags for POSIX compliance... none needed
checking how to run the C preprocessor... (cached) gcc -E
checking for ANSI C header files... (cached) yes
checking for vprintf... (cached) yes
checking for atexit... (cached) yes
checking for on_exit... (cached) yes
checking size of char... (cached) 1
checking size of short... (cached) 2
checking size of long... (cached) 4
checking size of int... (cached) 4
checking size of void *... (cached) 4
checking size of long long... (cached) 8
checking for working const... (cached) yes
checking for __inline... (cached) yes
checking for __inline__... (cached) yes
checking for inline... (cached) yes
checking whether byte ordering is bigendian... (cached) no
checking for float.h... (cached) yes
checking for limits.h... (cached) yes
checking for pwd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for sys/select.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/times.h... (cached) yes
checking for unistd.h... (cached) yes
checking for values.h... (cached) yes
checking for lstat... (cached) yes
checking for strerror... (cached) yes
checking for strsignal... (cached) yes
checking for memmove... (cached) yes
checking for vsnprintf... (cached) yes
checking for strcasecmp... (cached) yes
checking for strncasecmp... (cached) yes
checking for poll... (cached) yes
checking for sys_errlist... yes
checking for sys_siglist... yes
checking for fd_set... yes, found in sys/types.h
checking for wchar.h... yes
checking for wctype.h... yes
checking for iswalnum... (cached) yes
checking if iswalnum() and friends are properly defined... yes
checking for an implementation of va_copy()... (cached) yes
checking for an implementation of __va_copy()... (cached) yes
checking whether va_lists can be copied by value... (cached) yes
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking for preceeding underscore in symbols... (cached) no
checking for dlerror... (cached) yes
checking for pthread_attr_init in -lpthread... (cached) yes
checking for thread implementation... posix
checking for pthread_attr_init in -lpthread... (cached) yes
checking necessary linker options... -lpthread
checking necessary compiler options... -D_REENTRANT
checking size of pthread_mutex_t... (cached) 24
checking byte contents of pthread_mutex_t... (cached) 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
checking system definitions for POLLIN POLLOUT POLLPRI POLLERR POLLHUP POLLNVAL... done
creating ./config.status
creating Makefile
creating glib-config
creating gmodule/gmoduleconf.h
creating gmodule/Makefile
creating gthread/Makefile
creating docs/Makefile
creating config.h
config.h is unchanged
creating glibconfig.h
glibconfig.h is unchanged
[root@localhost glib-1.1.11]# make
CONFIG_FILES= CONFIG_HEADERS= CONFIG_OTHER=glibconfig.h ./config.status
creating glibconfig.h
glibconfig.h is unchanged
echo timestamp > stamp-gc-h
make all-recursive
make[1]: Entre dans le répertoire `/home/jeep05/glib-1.1.11'
Making all in gmodule
make[2]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/gmodule'
make[2]: Rien à faire pour `all'.
make[2]: Quitte le répertoire `/home/jeep05/glib-1.1.11/gmodule'
Making all in gthread
make[2]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/gthread'
make[2]: Rien à faire pour `all'.
make[2]: Quitte le répertoire `/home/jeep05/glib-1.1.11/gthread'
Making all in docs
make[2]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/docs'
make[2]: Rien à faire pour `all'.
make[2]: Quitte le répertoire `/home/jeep05/glib-1.1.11/docs'
make[1]: Quitte le répertoire `/home/jeep05/glib-1.1.11'
[root@localhost glib-1.1.11]# make install
Making install in gmodule
make[1]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/gmodule'
/bin/sh ../mkinstalldirs /usr/local/lib
/bin/sh ../libtool --mode=install /usr/bin/install -c -m 644 libgmodule.la /usr/local/lib/libgmodule.la
/usr/bin/install -c -m 644 .libs/libgmodule-1.1.so.11.0.0 /usr/local/lib/libgmodule-1.1.so.11.0.0
rm -f /usr/local/lib/libgmodule-1.1.so.11 /usr/local/lib/libgmodule.so
(cd /usr/local/lib && ln -s libgmodule-1.1.so.11.0.0 libgmodule-1.1.so.11)
(cd /usr/local/lib && ln -s libgmodule-1.1.so.11.0.0 libgmodule.so)
/usr/bin/install -c -m 644 libgmodule.la /usr/local/lib/libgmodule.la
/usr/bin/install -c -m 644 .libs/libgmodule.a /usr/local/lib/libgmodule.a
ranlib /usr/local/lib/libgmodule.a
chmod 644 /usr/local/lib/libgmodule.a
PATH="\/sbinusr/sbinbinusr/binusr/X11R6/binsbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
To link against installed libraries in a given directory, LIBDIR,
you must use the `-LLIBDIR' flag during linking.
You will also need to do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/bin/sh ../mkinstalldirs /usr/local/include
/usr/bin/install -c -m 644 gmodule.h /usr/local/include/gmodule.h
make[1]: Quitte le répertoire `/home/jeep05/glib-1.1.11/gmodule'
Making install in gthread
make[1]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/gthread'
/bin/sh ../mkinstalldirs /usr/local/lib
/bin/sh ../libtool --mode=install /usr/bin/install -c -m 644 libgthread.la /usr/local/lib/libgthread.la
/usr/bin/install -c -m 644 .libs/libgthread-1.1.so.11.0.0 /usr/local/lib/libgthread-1.1.so.11.0.0
rm -f /usr/local/lib/libgthread-1.1.so.11 /usr/local/lib/libgthread.so
(cd /usr/local/lib && ln -s libgthread-1.1.so.11.0.0 libgthread-1.1.so.11)
(cd /usr/local/lib && ln -s libgthread-1.1.so.11.0.0 libgthread.so)
/usr/bin/install -c -m 644 libgthread.la /usr/local/lib/libgthread.la
/usr/bin/install -c -m 644 .libs/libgthread.a /usr/local/lib/libgthread.a
ranlib /usr/local/lib/libgthread.a
chmod 644 /usr/local/lib/libgthread.a
PATH="\/sbinusr/sbinbinusr/binusr/X11R6/binsbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
To link against installed libraries in a given directory, LIBDIR,
you must use the `-LLIBDIR' flag during linking.
You will also need to do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[1]: Quitte le répertoire `/home/jeep05/glib-1.1.11/gthread'
Making install in docs
make[1]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/docs'
/bin/sh ../mkinstalldirs /usr/local/info
/usr/bin/install -c -m 644 ./glib.info /usr/local/info/glib.info
install-info --info-dir=/usr/local/info /usr/local/info/glib.info
make install-man1
make[2]: Entre dans le répertoire `/home/jeep05/glib-1.1.11/docs'
/bin/sh ../mkinstalldirs /usr/local/man/man1
/usr/bin/install -c -m 644 ./glib-config.1 /usr/local/man/man1/glib-config.1
make[2]: Quitte le répertoire `/home/jeep05/glib-1.1.11/docs'
make[1]: Quitte le répertoire `/home/jeep05/glib-1.1.11/docs'
/bin/sh ./mkinstalldirs /usr/local/lib
/bin/sh ./libtool --mode=install /usr/bin/install -c -m 644 libglib.la /usr/local/lib/libglib.la
/usr/bin/install -c -m 644 .libs/libglib-1.1.so.11.0.0 /usr/local/lib/libglib-1.1.so.11.0.0
rm -f /usr/local/lib/libglib-1.1.so.11 /usr/local/lib/libglib.so
(cd /usr/local/lib && ln -s libglib-1.1.so.11.0.0 libglib-1.1.so.11)
(cd /usr/local/lib && ln -s libglib-1.1.so.11.0.0 libglib.so)
/usr/bin/install -c -m 644 libglib.la /usr/local/lib/libglib.la
/usr/bin/install -c -m 644 .libs/libglib.a /usr/local/lib/libglib.a
ranlib /usr/local/lib/libglib.a
chmod 644 /usr/local/lib/libglib.a
PATH="\/sbinusr/sbinbinusr/binusr/X11R6/binsbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
To link against installed libraries in a given directory, LIBDIR,
you must use the `-LLIBDIR' flag during linking.
You will also need to do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/bin/sh ./mkinstalldirs /usr/local/bin
/usr/bin/install -c glib-config /usr/local/bin/glib-config
/bin/sh ./mkinstalldirs /usr/local/lib/glib/include
/usr/bin/install -c -m 644 ./glibconfig.h /usr/local/lib/glib/include/glibconfig.h
/bin/sh ./mkinstalldirs /usr/local/share/aclocal
/usr/bin/install -c -m 644 ./glib.m4 /usr/local/share/aclocal/glib.m4
/bin/sh ./mkinstalldirs /usr/local/include
/usr/bin/install -c -m 644 glib.h /usr/local/include/glib.h
[root@localhost glib-1.1.11]# cd /home/jeep05/gtk+-1.1.11
[root@localhost gtk+-1.1.11]# ./configure
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking host system type... i686-pc-linux-gnu
checking for ranlib... ranlib
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... yes
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking host system type... i686-pc-linux-gnu
checking whether build environment is sane... yes
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for POSIXized ISC... no
checking for gcc option to accept ANSI C... none needed
checking for a BSD compatible install... /usr/bin/install -c
checking whether make sets ${MAKE}... (cached) yes
checking for mawk... no
checking for gawk... gawk
checking for perl5... perl5
checking for indent... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for working const... yes
checking for inline... inline
checking for off_t... yes
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for unistd.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for argz.h... yes
checking for limits.h... yes
checking for locale.h... yes
checking for nl_types.h... yes
checking for malloc.h... yes
checking for string.h... yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getcwd... yes
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for strchr... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for __argz_count... yes
checking for __argz_stringify... yes
checking for __argz_next... yes
checking for stpcpy... yes
checking for LC_MESSAGES... yes
checking whether NLS is requested... yes
checking for libintl.h... yes
checking for gettext in libc... yes
checking for msgfmt... no
checking whether catgets can be used... no
found xgettext program is not GNU xgettext; ignore it
checking for catalogs to be installed... de fr nl pt ja sv pl no
checking for gettext... yes
checking for extra flags to get ANSI library prototypes... none needed
checking for extra flags for POSIX compliance... none needed
checking for glib-config... no
checking for GLIB - version >= 1.1.11... no
*** The glib-config script installed by GLIB could not be found
*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GLIB_CONFIG environment variable to the
*** full path to glib-config.
configure: error:
*** GLIB 1.1.11 or better is required. The latest version of GLIB
*** is always available from ftp://ftp.gtk.org.
[root@localhost gtk+-1.1.11]# make
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.