Messagerie : mail disparaissent, se décallent, vont dans spam....

Marsh Posté le 05-09-2007 à 09:42:09

Bonjour à toutes et à tous,

Je suis en stage dans une entreprise et j'entends depuis quelques temps qu'il y a un problème de mail que personne n'arrive à résoudre.
Voilà la description :

Serveur : Postfix + DSPAM
Client : Outlook express

Le problème : attention ce problème n'arrive pas à tous les clients mais totalement au hasard, de même que les conséquences

- les mails de clients vont dans le dossier spam même lorsque on dit au filtre que tel ou tel mail n'est pas un spam
- les mails sont simplement supprimer des clients mais sont toujours présents sur le serveur
- il y a un décallage dans les mails : je m'explique, quand on clique sur un mail dans le client, le contenu de ce mail de correspond pas à l'objet. Il y a comme un décallage entre les objets et le contenu des mails

PS : je précise que cela vaut aussi bien pour les mails internes qu'externes

Je ne suis pas en charge de ce dossier, mais ca pourrait bien m'aider si je pouvais leur apporter une solution....la société qui s'occupe du serveur de mail est apparement incapable... -_-.

voilà merci à vous

Message édité par headquaker le 05-09-2007 à 09:43:04

Reply

Marsh Posté le 05-09-2007 à 09:42:09

Reply

Marsh Posté le 05-09-2007 à 09:44:32

Ton client vient d'envoyer ce message dans la mauvaise catégorie du forum.

---------------
Décentralisons Internet-Bépo-Troll Bingo - "Pour adoucir le mélange, pressez trois quartiers d’orange !"

Reply

Marsh Posté le 05-09-2007 à 09:44:51

pour t'aider il faudrait la conf complete et des logs.

postconf -n
master.cf
la conf de dspam

Message édité par toniotonio le 05-09-2007 à 09:45:05

---------------
Messagerie dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Reply

Marsh Posté le 05-09-2007 à 09:54:25

je vais voir si je peux fournir les infos. merci

Reply

Marsh Posté le 05-09-2007 à 10:05:40

Code :

postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
biff = no
config_directory = /etc/postfix
inet_interfaces = all
inet_protocols = all
mailbox_size_limit = 0
mydestination = localhost, localhost.localdomain, localhost
myhostname = srv-xmail
mynetworks = 127.0.0.0/8 x.x.x.x/8 y.y.y.y/24
recipient_delimiter = +
relayhost = [x.x.x.x]
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)

Master.cf

Code :

127.0.0.1:smtp inet n - - - - smtpd
x.x.x.x:smtp inet n - - - - smtpd -o conten t_filter
x.x.x.x2:smtp inet n - - - - smtpd
#
# SMTP Utilisant le filtre d'ajout des pieds-de-page
#smtp inet n - - - - smtpd #-o content_filte r=dfilt:
#submission inet n - - - - smtpd
# -o smtpd_etrn_restrictions=reject
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - - 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
relay unix - - - - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -d -t$nexthop -f$sender $recipi ent
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
# only used by postfix-tls
#tlsmgr fifo - - n 300 1 tlsmgr
#smtps inet n - n - - smtpd -o smtpd_tls_wrapp ermode=yes -o smtpd_sasl_auth_enable=yes
#587 inet n - n - - smtpd -o smtpd_enforce_t ls=yes -o smtpd_sasl_auth_enable=yes
tlsmgr unix - - - 1000? 1 tlsmgr
scache unix - - - - 1 scache
discard unix - - - - - discard
# Ma défintion de mon filter d'ajout de pied-de-page
#
dfilt unix - n n - - pipe flags=Rq user=filte r argv=/etc/postfix/disclaimer -f ${sender} -- ${recipient}

dspam.conf

Code :

## $Id: dspam.conf.in,v 1.72 2006/05/14 15:40:42 jonz Exp $
## dspam.conf -- DSPAM configuration file
##
#
# DSPAM Home: Specifies the base directory to be used for DSPAM storage
#
Home /var/spool/dspam
#
# StorageDriver: Specifies the storage driver backend (library) to use.
# You'll only need to set this if you are using dynamic storage driver plugins.
# The default when one storage driver is specified is to statically link. Be
# sure to include the path to the library if necessary, and some systems may
# use an extension other than .so.
#
# Options include:
#
# libmysql_drv.so libpgsql_drv.so libsqlite_drv.so
# libsqlite3_drv.so libora_drv.so libhash_drv.so
#
# IMPORTANT: Switching storage drivers requires more than merely changing
# this option. If you do not wish to lose all of your data, you will need to
# migrate it to the new backend before making this change.
#
#StorageDriver /usr/lib/dspam/libhash_drv.so
StorageDriver /usr/lib/dspam/libmysql_drv.so
#
# Trusted Delivery Agent: Specifies the local delivery agent DSPAM should call
# when delivering mail as a trusted user. Use %u to specify the user DSPAM is
# processing mail for. It is generally a good idea to allow the MTA to specify
# the pass-through arguments at run-time, but they may also be specified here.
#
# Most operating system defaults:
#TrustedDeliveryAgent "/usr/bin/procmail" # Linux
#TrustedDeliveryAgent "/usr/bin/mail" # Solaris
#TrustedDeliveryAgent "/usr/libexec/mail.local" # FreeBSD
#TrustedDeliveryAgent "/usr/bin/procmail" # Cygwin
#
# Other popular configurations:
#TrustedDeliveryAgent "/usr/cyrus/bin/deliver" # Cyrus
#TrustedDeliveryAgent "/bin/maildrop" # Maildrop
#TrustedDeliveryAgent "/usr/local/sbin/exim -oMr spam-scanned" # Exim
#
#TrustedDeliveryAgent "/usr/bin/procmail -m %u"
#TrustedDeliveryAgent "/usr/bin/maildrop -d %u"
#TrustedDeliveryAgent "/usr/sbin/deliverquota -c -w 90 /home/%u/Maildir/ 10000"
#
# Untrusted Delivery Agent: Specifies the local delivery agent and arguments
# DSPAM should use when delivering mail and running in untrusted user mode.
# Because DSPAM will not allow pass-through arguments to be specified to
# untrusted users, all arguments should be specified here. Use %u to specify
# the user DSPAM is processing mail for. This configuration parameter is only
# necessary if you plan on allowing untrusted processing.
#
TrustedDeliveryAgent "/usr/sbin/sendmail"
# AU début, Untrusted...
#UntrustedDeliveryAgent "/usr/bin/maildrop -d %u"
#UntrustedDeliveryAgent "/usr/sbin/deliverquota -c -w 90 /home/%u/Maildir/ 10000"
#
# SMTP or LMTP Delivery: Alternatively, you may wish to use SMTP or LMTP
# delivery to deliver your message to the mail server. You will need to
# configure with --enable-daemon to use host delivery, however you do not need
# to operate in daemon mode. Specify an IP address or UNIX path to a domain
# socket below as a host.
#
# If you would like to set up DeliveryHost's on a per-domain basis, use
# the syntax: DeliveryHost.domain.com 1.2.3.4
#
#DeliveryHost 127.0.0.1
#DeliveryPort 24
#DeliveryIdent localhost
#DeliveryProto LMTP
#
# FallbackDomains: If you want to specify certain domains as fallback domains,
# enable this option. For example, you could create a user @domain.com, and
# if bob@domain.com does not resolve to a known user on the system, the user
# could default to your @domain.com user. NOTE: This also requires designating
# fallbackDomain for the domain name;
# e.g. dspam_admin ch pref domain.com fallbackDomain on
#
#FallbackDomains on
#
# Quarantine Agent: DSPAM's default behavior is to quarantine all mail it
# thinks is spam. If you wish to override this behavior, you may specify
# a quarantine agent which will be called with all messages DSPAM thinks is
# spam. Use %u to specify the user DSPAM is processing mail for.
#
QuarantineAgent "/usr/bin/procmail -p -m /etc/dspam/rc-quarantine %u"
#
# DSPAM can optionally process "plused users" (addresses in the user+detail
# form) by truncating the username just before the "+", so all internal
# processing occurs for "user", but delivery will be performed for
# "user+detail". This is only useful if the LDA can handle "plused users"
# (for example Cyrus IMAP) and when configured for LMTP delivery above
#
#EnablePlusedDetail on
#
# Quarantine Mailbox: DSPAM's LMTP code can send spam mail using LMTP to a
# "plused" mailbox (such as user+quarantine) leaving quarantine processing
# for retraining or deletion to be performed by the LDA and the mail client.
# "plused" mailboxes are supported by Cyrus IMAP and possibly other LDAs.
# The mailbox name must have the +
#
#QuarantineMailbox +quarantine
#
# OnFail: What to do if local delivery or quarantine should fail. If set
# to "unlearn", DSPAM will unlearn the message prior to exiting with an
# un successful return code. The default option, "error" will not unlearn
# the message but return the appropriate error code. The unlearn option
# is use-ful on some systems where local delivery failures will cause the
# message to be requeued for delivery, and could result in the message
# being processed multiple times. During a very large failure, however,
# this could cause a significant load increase.
#
OnFail error
# Trusted Users: Only the users specified below will be allowed to perform
# administrative functions in DSPAM such as setting the active user and
# accessing tools. All other users attempting to run DSPAM will be restricted;
# their uids will be forced to match the active username and they will not be
# able to specify delivery agent privileges or use tools.
#
Trust root
Trust dspam
Trust mail
Trust mailnull
Trust smmsp
Trust daemon
#Trust nobody
#Trust majordomo
#
# Debugging: Enables debugging for some or all users. IMPORTANT: DSPAM must
# be compiled with debug support in order to use this option. DSPAM should
# never be running in production with debug active unless you are
# troubleshooting problems.
#
# DebugOpt: One or more of: process, classify, spam, fp, inoculation, corpus
# process standard message processing
# classify message classification using --classify
# spam error correction of missed spam
# fp error correction of false positives
# inoculation message inoculations (source=inoculation)
# corpus corpusfed messages (source=corpus)
#
#Debug *
#Debug bob bill
#
#DebugOpt process spam fp
#Debug *
#DebugOpt process spam fp classify
#
# ClassAlias: Alias a particular class to spam/nonspam. This is useful if
# classifying things other than spam.
#ClassAliasSpam badstuff
#ClassAliasNonspam goodstuff
#
# Training Mode: The default training mode to use for all operations, when
# one has not been specified on the commandline or in the user's preferences.
# Acceptable values are: toe, tum, teft, notrain
#
TrainingMode teft
#
# TestConditionalTraining: By default, dspam will retrain certain errors
# until the condition is no longer met. This usually accelerates learning.
# Some people argue that this can increase the risk of errors, however.
#
TestConditionalTraining on
#
# Features: Specify features to activate by default; can also be specified
# on the commandline. See the documentation for a list of available features.
# If _any_ features are specified on the commandline, these are ignored.
#
# NOTE: For standard "CRM114" Markovian weighting, use sbph
#
#Feature sbph
#Feature noise
Feature chained
Feature whitelist
# Training Buffer: The training buffer waters down statistics during training.
# It is designed to prevent false positives, but can also dramatically reduce
# dspam's catch rate during initial training. This can be a number from 0
# (no buffering) to 10 (maximum buffering). If you are paranoid about false
# positives, you should probably enable this option.
#Feature tb=5
Feature tb=5
#
# Algorithms: Specify the statistical algorithms to use, overriding any
# defaults configured in the build. The options are:
# naive Naive-Bayesian (All Tokens)
# graham Graham-Bayesian ("A Plan for Spam" )
# burton Burton-Bayesian (SpamProbe)
# robinson Robinson's Geometric Mean Test (Obsolete)
# chi-square Fisher-Robinson's Chi-Square Algorithm
#
# You may have multiple algorithms active simultaneously, but it is strongly
# recommended that you group Bayesian algorithms with other Bayesian
# algorithms, and any use of Chi-Square remain exclusive.
#
# NOTE: For standard "CRM114" Markovian weighting, use 'naive', or consider
# using 'burton' for slightly better accuracy
#
# Don't mess with this unless you know what you're doing
#
#Algorithm chi-square
#Algorithm naive
Algorithm graham burton
#
# PValue: Specify the technique used for calculating PValues, overriding any
# defaults configured in the build. These options are:
# graham Graham's Technique ("A Plan for Spam" )
# robinson Robinson's Technique
# markov Markovian Weighted Technique
#
# Unlike algorithms, you may only have one of these defined. Use of the
# chi-square algorithm automatically changes this to robinson.
#
# Don't mess with this unless you know what you're doing.
#
#PValue robinson
#PValue markov
PValue graham
#
# SupressWebStats: Enable this if you are not using the CGI, and don't want
# .stats files written.
#SupressWebStats on
#
# ImprobabilityDrive: Calculate odds-ratios for ham/spam, and add to
# X-DSPAM-Improbability headers
ImprobabilityDrive on
statisticalSedation off
#
# Preferences: Specify any preferences to set by default, unless otherwise
# overridden by the user (see next section) or a default.prefs file.
# If user or default.prefs are found, the user's preferences will override any
# defaults.
#
Preference "spamAction=tag"
#Preference "signatureLocation=message" # 'message' or 'headers'
Preference "signatureLocation=message" # 'message' or 'headers'
#Preference "showFactors=on"
#Preference "spamAction=tag"
Preference "spamSubject=[SPAM]"
#
# Overrides: Specifies the user preferences which may override configuration
# and commandline defaults. Any other preferences supplied by an untrusted user
# will be ignored.
#
AllowOverride trainingMode
AllowOverride spamAction spamSubject
AllowOverride statisticalSedation
AllowOverride enableBNR
AllowOverride enableWhitelist
AllowOverride signatureLocation
AllowOverride showFactors
AllowOverride optIn optOut
AllowOverride whitelistThreshold
# --- Oracle ---
#OraServer "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=PROD)))"
#OraUser dspam
#OraPass changeme
#OraSchema dspam
# --- SQLite ---
#SQLitePragma "synchronous = OFF"
# --- Hash ---
# HashRecMax: Default number of records to create in the initial segment when
# building hash files. 100,000 yields files 1.6MB in size, but can fill up
# fast, so be sure to increase this (to a million or more) if you're not using
# autoextend.
#
# Primes List:
# 53, 97, 193, 389, 769, 1543, 3079, 6151, 12289, 24593, 49157, 98317, 196613,
# 393241, 786433, 1572869, 3145739, 6291469, 12582917, 25165843, 50331653,
# 100663319, 201326611, 402653189, 805306457, 1610612741, 3221225473,
# 4294967291
#
HashRecMax 98317
# HashAutoExtend: Autoextend hash databases when they fill up. This allows
# them to continue to train by adding extents (extensions) to the file. There
# will be a small delay during the growth process, as everything needs to be
# closed and remapped.
#
HashAutoExtend on
# HashMaxExtents: The maximum number of extents that may be created in a single
# hash file. Set this to zero for unlimited
#
HashMaxExtents 0
# HashExtentSize: The record size for newly created extents. Creating this too
# small could result in many extents being created. Creating this too large
# could result in excessive disk space usage.
#
HashExtentSize 49157
# HashMaxSeek: The maximum number of records to seek to insert a new record
# before failing or adding a new extent. Setting this too high will exhaustively
# scan each segment and kill performance. Typically, a low value is acceptable
# as even older extents will continue to fill over time.
#
HashMaxSeek 100
# HashConcurrentUser: If you are using a single, stateful hash database in
# daemon mode, specifying a concurrent user will cause the user to be
# permanently mapped into memory and shared via rwlocks.
#
#HashConcurrentUser user
# HashConnectionCache: If running in daemon mode, this is the max # of
# concurrent connections that will be supported. NOTE: If you are using
# HashConcurrentUser, this option is ignored, as all connections are read-
# write locked instead of mutex locked.
HashConnectionCache 10
# LDAP: Perform various LDAP functions depending on LDAPMode variable.
# Presently, the only mode supported is 'verify', which will verify the existence
# of an unknown user in LDAP prior to creating them as a new user in the system.
# This is useful on some systems acting as gateway machines.
#
#LDAPMode verify
#LDAPHost ldaphost.mydomain.com
#LDAPFilter "(mail=%u)"
#LDAPBase ou=people,dc=domain,dc=com
#LDAPMode verify
#LDAPHost stoeffler-ad.local
#LDAPFilter "(mail=%u@stoeffler.com)"
#LDAPBase dc=stoeffler-ad,dc=local
#LDAPRootDN CN=squid,OU=Administrateurs,OU=ObernaiUSR,DC=stoeffler-ad,DC=local
#LDAPDNPass squid
# Optionally, you can specify storage profiles, and specify the server to
# use on the commandline with --profile. For example:
#
#Profile DECAlpha
#MySQLServer.DECAlpha 10.0.0.1
#MySQLPort.DECAlpha 3306
#MySQLUser.DECAlpha dspam
#MySQLPass.DECAlpha changeme
#MySQLDb.DECAlpha dspam
#MySQLCompress.DECAlpha true
#
#Profile Sun420R
#MySQLServer.Sun420R 10.0.0.2
#MySQLPort.Sun420R 3306
#MySQLUser.Sun420R dspam
#MySQLPass.Sun420R changeme
#MySQLDb.Sun420R dspam
#MySQLCompress.Sun420R false
#
#DefaultProfile DECAlpha
#
# If you're using storage profiles, you can set failovers for each profile.
# Of course, if you'll be failing over to another database, that database
# must have the same information as the first. If you're using a global
# database with no training, this should be relatively simple. If you're
# configuring per-user data, however, you'll need to set up some type of
# replication between databases.
#
#Failover.DECAlpha SUN420R
#Failover.Sun420R DECAlpha
# If the storage fails, the agent will follow each profile's failover up to
# a maximum number of failover attempts. This should be set to a maximum of
# the number of profiles you have, otherwise the agent could loop and try
# the same profile multiple times (unless this is your desired behavior).
#
#FailoverAttempts 1
#
# Ignored headers: If DSPAM is behind other tools which may add a header to
# incoming emails, it may be beneficial to ignore these headers - especially
# if they are coming from another spam filter. If you are _not_ using one of
# these tools, however, leaving the appropriate headers commented out will
# allow DSPAM to use them as telltale signs of forged email.
#
#IgnoreHeader X-Spam-Status
#IgnoreHeader X-Spam-Scanned
#IgnoreHeader X-Virus-Scanner-Result
#
# Lookup: Perform lookups on streamlined blackhole list servers (see
# http://www.nuclearelephant.com/projects/sbl/). The streamlined blacklist
# server is machine-automated, unsupervised blacklisting system designed to
# provide real-time and highly accurate blacklisting based on network spread.
# When performing a lookup, DSPAM will automatically learn the inbound message
# as spam if the source IP is listed. Until an official public RABL server is
# available, this feature is only useful if you are running your own
# streamlined blackhole list server for internal reporting among multiple mail
# servers. Provide the name of the lookup zone below to use.
#
# This function performs standard reverse-octet.domain lookups, and while it
# will function with many RBLs, it's strongly discouraged to use those
# maintained by humans as they're often inaccurate and could hurt filter
# learning and accuracy.
#
#Lookup "sbl.yourdomain.com"
#
# RBLInoculate: If you want to inoculate the user from RBL'd messages it would
# have otherwise missed, set this to on.
#
#RBLInoculate off
#
# Notifications: Enable the sending of notification emails to users (first
# message, quarantine full, etc.)
#
Notifications off
#
# Purge configuration: Set dspam_clean purge default options, if not otherwise
# specified on the commandline
#
PurgeSignatures 14 # Stale signatures
PurgeNeutral 90 # Tokens with neutralish probabilities
PurgeUnused 90 # Unused tokens
PurgeHapaxes 30 # Tokens with less than 5 hits (hapaxes)
PurgeHits1S 15 # Tokens with only 1 spam hit
PurgeHits1I 15 # Tokens with only 1 innocent hit
#
# Purge configuration for SQL-based installations using purge.sql
#
#PurgeSignature off # Specified in purge.sql
#PurgeNeutral 90
#PurgeUnused off # Specified in purge.sql
#PurgeHapaxes off # Specified in purge.sql
#PurgeHits1S off # Specified in purge.sql
#PurgeHits1I off # Specified in purge.sql
#
# Local Mail Exchangers: Used for source address tracking, tells DSPAM which
# mail exchangers are local and therefore should be ignored in the Received:
# header when tracking the source of an email. Note: you should use the address
# of the host as appears between brackets [ ] in the Received header.
#
LocalMX 127.0.0.1
#
# Logging: Disabling logging for users will make usage graphs unavailable to
# them. Disabling system logging will make admin graphs unavailable.
#
SystemLog on
UserLog on
#
# TrainPristine: for systems where the original message remains server side
# and can therefore be presented in pristine format for retraining. This option
# will cause DSPAM to cease all writing of signatures and DSPAM headers to the
# message, and deliver the message in as pristine format as possible. This mode
# REQUIRES that the original message in its pristine format (as of delivery)
# be presented for retraining, as in the case of webmail, imap, or other
# applications where the message is actually kept server-side during reading,
# and is preserved. DO NOT use this switch unless the original message can be
# presented for retraining with the ORIGINAL HEADERS and NO MODIFICATIONS.
#
#TrainPristine on
#
# Opt: in or out; determines DSPAM's default filtering behavior. If this value
# is set to in, users must opt-in to filtering by dropping a .dspam file in
# /var/dspam/opt-in/user.dspam (or if you have homedirs configured, a .dspam
# folder in their home directory). The default is opt-out, which means all
# users will be filtered unless a .nodspam file is dropped in
# /var/dspam/opt-out/user.nodspam
#
Opt out
#
# TrackSources: specify which (if any) source addresses to track and report
# them to syslog (mail.info). This is useful if you're running a firewall or
# blacklist and would like to use this information. Spam reporting also drops
# RABL blacklist files (see http://www.nuclearelephant.com/projects/rabl/).
#
#TrackSources spam nonspam
#
# ParseToHeaders: In lieu of setting up individual aliases for each user,
# DSPAM can be configured to automatically parse the To: address for spam and
# false positive forwards. From there, it can be configured to either set the
# DSPAM user based on the username specified in the header and/or change the
# training class and source accordingly. The options below can be used to
# customize most common types of header parsing behavior to avoid the need for
# multiple aliases, or if using LMTP, aliases entirely..
#
# ParseToHeader: Parse the To: headers of an incoming message. This must be
# set to 'on' to use either of the following features.
#
# ChangeModeOnParse: Automatically change the class (to spam or innocent)
# depending on whether spam- or notspam- was specified, and change the source
# to 'error'. This is convenient if you're not using aliases at all, but
# are delivering via LMTP.
#
# ChangeUserOnParse: Automatically change the username to match that specified
# in the To: header. For example, spam-bob@domain.tld will set the username
# to bob, ignoring any --user passed in. This may not always be desirable if
# you are using virtual email addresses as usernames. Options:
# on or user take the portion before the @ sign only
# full take everything after the initial {spam,notspam}-.
#
#ParseToHeaders on
#ChangeModeOnParse on
#ChangeUserOnParse on
#
# Broken MTA Options: Some MTAs don't support the proper functionality
# necessary. In these cases you can activate certain features in DSPAM to
# compensate. 'returnCodes' causes DSPAM to return an exit code of 99 if
# the message is spam, 0 if not, or a negative code if an error has occured.
# Specifying 'case' causes DSPAM to force the input usernames to lowercase.
# Spceifying 'lineStripping' causes DSPAM to strip ^M's from messages passed
# in.
#
#Broken returnCodes
#Broken case
#Broken lineStripping
#
# MaxMessageSize: You may specify a maximum message size for DSPAM to process.
# If the message is larger than the maximum size, it will be delivered
# without processing. Value is in bytes.
#
#MaxMessageSize 4194304
#
# Virus Checking: If you are running clamd, DSPAM can perform stream-based
# virus checking using TCP. Uncomment the values below to enable virus
# checking.
#
# ClamAVResponse: reject (reject or drop the message with a permanent failure)
# accept (accept the message and quietly drop the message)
# spam (treat as spam and quarantine/tag/whatever)
#
ClamAVPort 3310
ClamAVHost 127.0.0.1
ClamAVResponse spam
#
# Daemonized Server: If you are running DSPAM as a daemonized server using
# --daemon, the following parameters will override the default. Use the
# ServerPass option to set up accounts for each client machine. The DSPAM
# server will process and deliver the message based on the parameters
# specified. If you want the client machine to perform delivery, use
# the --stdout option in conjunction with a local setup.
#
#ServerPort 24
#ServerQueueSize 32
#ServerPID /var/run/dspam.pid
#
# ServerMode specifies the type of LMTP server to start. This can be one of:
# dspam: DSPAM-proprietary DLMTP server, for communicating with dspamc
# standard: Standard LMTP server, for communicating with Postfix or other MTA
# auto: Speak both DLMTP and LMTP; auto-detect by ServerPass.IDENT
#
#ServerMode dspam
# If supporting DLMTP (dspam) mode, dspam clients will require authentication
# as they will be passing in parameters. The idents below will be used to
# determine which clients will be speaking DLMTP, so if you will be using
# both LMTP and DLMTP from the same host, be sure to use something other
# than the server's hostname below (which will be sent by the MTA during a
# standard LMTP LHLO).
#
#ServerPass.Relay1 "secret"
#ServerPass.Relay2 "password"
# If supporting standard LMTP mode, server parameters will need to be specified
# here, as they will not be passed in by the mail server. The ServerIdent
# specifies the 250 response code ident sent back to connecting clients and
# should be set to the hostname of your server, or an alias.
#
# NOTE: If you specify --user in ServerParameters, the RCPT TO will be
# used only for delivery, and not set as the active user for processing.
#
#ServerParameters "--deliver=innocent -d %u"
#ServerIdent "localhost.localdomain"
# If you wish to use a local domain socket instead of a TCP socket, uncomment
# the following. It is strongly recommended you use local domain sockets if
# you are running the client and server on the same machine, as it eliminates
# much of the bandwidth overhead.
#
#ServerDomainSocketPath "/tmp/dspam.sock"
#
# Client Mode: If you are running DSPAM in client/server mode, uncomment and
# set these variables. A ClientHost beginning with a / will be treated as
# a domain socket.
#
#ClientHost /tmp/dspam.sock
#ClientIdent "secret@Relay1"
#
#ClientHost 127.0.0.1
#ClientPort 24
#ClientIdent "secret@Relay1"
# RABLQueue: Touch files in the RABL queue
# If you are a reporting streamlined blackhole list participant, you can
# touch ip addresses within the directory the rabl_client process is watching.
#
#RABLQueue /var/spool/rabl
# DataSource: If you are using any type of data source that does not include
# email-like headers (such as documents), uncomment the line below. This
# will cause the entire input to be treated like a message "body"
#
#DataSource document
# ProcessorWordFrequency: By default, words are only counted once per message.
# If you are classifying large documents, however, you may wish to count once
# per occurrence instead.
#
#ProcessorWordFrequency occurrence
# ProcessorBias: Bias causes the filter to lean more toward 'innocent', and
# usually greatly reduces false positives. It is the default behavior of
# most Bayesian filters (including dspam).
#
# NOTE: You probably DONT want this if you're using Markovian Weighting, unless
# you are paranoid about false positives.
#
ProcessorBias on
#Tentative d'augmenter la whitelist
#
#Preference whitelistThreshold=1000
# le 29 aout 2007
Preference whitelistThreshold=10
# Include a directory with configuration items.
Include /etc/dspam/dspam.d/
## EOF

Message édité par headquaker le 05-09-2007 à 11:00:50

Reply

Marsh Posté le 05-09-2007 à 10:21:23

postes tes conf avec la balise code ce sera plus lisible

---------------
Messagerie dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Reply

Marsh Posté le 05-09-2007 à 10:45:16

voilou

Reply

Marsh Posté le 05-09-2007 à 10:47:38

comment les mails sont ils transmis a ton antispam ? (SA ou Dspam alors ?)

Message édité par toniotonio le 05-09-2007 à 10:48:02

---------------
Messagerie dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Reply

Marsh Posté le 05-09-2007 à 10:52:29

c'est bien DSPAM je vais voir la config...
voila j'ai mis la config en haut

Message édité par headquaker le 05-09-2007 à 11:05:40

Reply

Marsh Posté le 05-09-2007 à 11:06:58

ok mais comment les mails sont envoyés a DSPAM ?

par procmail ?

---------------
Messagerie dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Reply

Marsh Posté le 05-09-2007 à 11:06:58

Reply

Marsh Posté le 05-09-2007 à 11:08:49

oui

Reply

Marsh Posté le 05-09-2007 à 11:14:01

tu peux montrer la conf de procmail ?

---------------
Messagerie dédiée, Relais Mail Antispam/Antivirus, Infogérance 24/7: http://www.eole-its.com

Reply

Marsh Posté le 05-09-2007 à 11:22:28

Heu remarque surement sans intéret, mais le monsieur à un problème d'accès, je ne suis pas sûr de bien saisir ce que postfix vient faire dans l'histoire.

Tu accèdes comment aux mails : IMAP ou POP ?
Le problème de décallage entre le corps et le sujet se fait il seulement avec outlook express ou avec tous les types de clients ?

As tu essayé de désactiver DSPAM pour voir si le probleme persiste ?

---------------
Relax. Take a deep breath !

Reply

Marsh Posté le 05-09-2007 à 11:23:39

c'est quoi le fichier de config de procmail ?

Reply

Marsh Posté le 05-09-2007 à 11:24:49

on utilise uniquement outlook

c'est en IMAP

Reply

Marsh Posté le 05-09-2007 à 11:26:57

Teste avec un autre client...

L'objectif est de trouver la cause, il faut donc supprimer un part un les différents éléments:
- le serveur SMTP (je doute)
- l'antispam (possible)
- le serveur IMAP (fort probable pour la désynchro sujet/corps)
- le client (fort probable pour tous vos problèmes) sauf que vous tourner sous windows donc faut aller voir la partie du forum qui traite de windows pour ce cas la) ainsi que les deux catégories "Réseau"

Mais teste avec un nouveau client.

Message édité par o'gure le 05-09-2007 à 11:29:39

---------------
Relax. Take a deep breath !

Reply

Marsh Posté le 05-09-2007 à 11:45:06

je peux pas vraiment vu que ca arrive totalement au hasard...je vais leur en parler déjà merci

Message édité par headquaker le 05-09-2007 à 11:45:51

Reply

Messagerie : mail disparaissent, se décallent, vont dans spam....

Sujets relatifs:

Leave a Replay