Bonjour,
 
Je possède un GX700 dont j'essaye de mettre le Bios à jour...mise à jour EC selon le site de chez MSI.
 
Le fichier downloader chez msi contient 3 fichiers:
-A1719IMS.116
-AFU414sD
-flash
 
Quand je lance flash, un fenetre DOS s'ouvre une fraction de secondes et se referme...rien ne s'est passé.
 
Merci de votre à aide à tous car je ne trouve aucune solution.

Voici 2 liens pour répondre à la question:  
- http://support.msicomputer.co.uk/i [...] ticleid=24  
- http://support.msicomputer.co.uk/i [...] id=0&nav=0  
 
et l'explication de MSI:  
 
MSI Notebooks BIOS Update.  
*Please update the BIOS only when your NoteBook is running  
on mains/adaptor. Do not proceed if the NoteBook is running on  
battery only.*  
*If you are not sure of the correct BIOS for your notebook  
model please do not update it. Updating wrong BIOS will damage  
your notebook and such damage is not covered by warranty*  
1. Please go to global.msi.com.tw, (or asia.msi.com.tw) find your  
notebook, go to the BIOS tab, choose the correct BIOS (there are  
different BIOS versions for Windows Vista and Windows XP, please  
choose carefuly)and download it. The ‘zip’ fille will contain 2-3 files.  
(The below instructions are for updating the BIOS using a bootable  
CD/DVD but if you have any other bootable device you can use is as  
well)  
2. Using a CD/DVD writing software please create a Booteable  
CD/DVD with the 2-3 unzipped files in main/root directory.  
3. Please insert the created CD/DVD to your CD Device.  
4. Switch the Notebook off.  
5. Switch the Notebook on.  
6. Straight after powering the unit on please start pressing ‘F11’  
key. A boot menu will show up. Using arrow keys scroll on to your  
CD/DVD device and hit ‘Enter’ key.  
7. Once booted up from your CD/DVD please enter your CD/DVD  
by typing:  
‘X:’ (where X is your CD/DVD assigned drive letter, normally is D  
or E)  
Confirm by pressing the ‘Enter’ button.  
Then type:  
‘flash’ or ‘update’ (depends on the name of one of the files  
downloaded)  
Confirm by pressing the ‘Enter’ button.  
The BIOS will update automatically. When prompted: ‘Program  
ended normally’ please remove the CD/DVD and switch off your  
Notebook.  
8 Switch your Notebook on.  
9 Press ‘F1’ when prompted on the bottom of the screen.  
10. Using arrow keys: Go to ‘EXIT’, choose ‘Load Optimal Defaults’,  
Press Enter, Choose [OK] and Press Enter, go to ‘Save Changes and  
Exit’, Press Enter, Choose [OK] and Press Enter.  
Unit will now log in to windows as per normal with updated BIOS.

Bonjour.
J'ai fait un cd avec les 3 fichiers en question, mais rien ne se passe à la mise en route.....
J'ai même me créer un cd avec les fichiers d'une disquette de démarrage et le 3 fichiers du bios...  
Rien non plus avec une clef USB et FreeDos.