pbm gravure DVD avec nero

pbm gravure DVD avec nero - Stockage/Sauvegarde - Windows & Software

Marsh Posté le 17-05-2005 à 21:18:38    

Bonjour,
 
Depuis quelques jours, a chaque fois que j'essaye de graver un DVD de données, avec Nero, il me flingue un DVD.
DVD : ritek DVD-R 4X
graveur : liteon ldw851s (firmware a jour)
nero : 6.6.0.13
 
voici le log (pour les experts):
 
-------------------------------------------------------------------------  
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 23/04/2005 15:17:32  
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34  
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
 (Nero Express)
Recorder:             <LITE-ON DVDRW LDW-851S>  Version: GS0P - HA 1 TA 1 - 6.6.0.13
 Adapter driver:      <nvidesm>                 HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI  
CD-ROM:               <JLMS     XJ-HD166S       >Version: DS1E - HA 1 TA 0 - 6.6.0.13
 Adapter driver:      <nvidesm>                 HA 1
 
=== Scsi-Device-Map ===
DiskPeripheral       : ST3120026AS             3.18   SI3112r Port 0 ID 0  DMA: Off
DiskPeripheral       : HDS722525VLSA80         V36O   SI3112r Port 0 ID 0  DMA: Off
DiskPeripheral       : ST340016A               3.10   nvidesm Port 1 ID 0  DMA: Off
CdRomPeripheral      : LITE-ON DVDRW LDW-851S  GS0P   nvidesm Port 1 ID 1  DMA: Off
CdRomPeripheral      : JLMS    XJ-HD166S       DS1E   nvidesm Port 1 ID 0  DMA: Off
 
=== CDRom-Device-Map ===
JLMS XJ-HD166S             E:   CDRom1
LITE-ON DVDRW LDW-851S     D:   CDRom0
=======================
 
AutoRun : 1
Excluded drive IDs:  
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1048048kB)
Free physical memory: 534MB (547232kB)
Memory in use       : 47 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)  
 
17.5.2005
ISO compilation
21:09:25 #1 Text 0 File Isodoc.cpp, Line 6194
 Iso document burn settings
 ------------------------------------------
 Determine maximum speed : FALSE
 Simulate                : FALSE
 Write                   : TRUE
 Finalize CD             : TRUE
 Multisession            : FALSE
 Burning mode            : DAO
 Mode                    : 1
 ISO Level               : 1 (Max. of 11 = 8 + 3 char)
 Character set           : ISO 9660
 Joliet                  : TRUE
 Allow pathdepth more than 8 directories : TRUE
 Allow more than 255 characters in path  : TRUE
 Write ISO9660 ;1 file extensions        : TRUE
 
21:09:25 #2 Text 0 File Reader.cpp, Line 127
 Reader running
 
21:09:25 #3 Text 0 File Writer.cpp, Line 122
 Writer LITE-ON  DVDRW LDW-851S   running
 
21:09:25 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
 First writeable address = 0 (0x00000000)
 
21:09:25 #5 Text 0 File Burncd.cpp, Line 3167
 Turn on Disc-At-Once, using DVD media
 
21:09:26 #6 Text 0 File DlgWaitCD.cpp, Line 260
 Last possible write address on media:  2298495 (510:46.45, 4489MB)
 Last address to be written:            2117903 (470:38.53, 4136MB)
 
21:09:26 #7 Text 0 File DlgWaitCD.cpp, Line 272
 Write in overburning mode: NO (enabled: CD)
 
21:09:26 #8 Text 0 File DlgWaitCD.cpp, Line 2339
 Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
  Disc Manufacturer: RITEKG - 04
  Disc Application Code: 64, Disc Physical Code: 193
 
21:09:26 #9 Text 0 File DlgWaitCD.cpp, Line 438
 >>> Protocol of DlgWaitCD activities: <<<
 =========================================
 
21:09:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 ()
     2 indices, index0 (150) not provided
     original disc pos #0 + 2117904 (2117904) = #2117904/470:38.54
     relocatable, disc pos for caching/writing not required/ required, no patch infos
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2117904 blocks [LITE-ON  DVDRW LDW-851S]
 --------------------------------------------------------------
 
21:09:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
 Prepare recorder [LITE-ON  DVDRW LDW-851S] for write in CUE-sheet-DAO
 DAO infos:
 ==========
  MCN: ""
  TOCType: 0x00; Session Closed, disc fixated
  Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4337467392, ISRC ""
 DAO layout:
 ===========
  __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
        0 |  lead-in |   0 |    0x41 | 0x00
        0 |        1 |   0 |    0x41 | 0x00
        0 |        1 |   1 |    0x41 | 0x00
  2117904 | lead-out |   1 |    0x41 | 0x00
 
21:09:26 #12 Phase 24 File dlgbrnst.cpp, Line 1832
 Caching of files started
 
21:09:26 #13 Text 0 File Burncd.cpp, Line 4051
 Cache writing successful.
 
21:09:26 #14 Phase 25 File dlgbrnst.cpp, Line 1832
 Caching of files completed
 
21:09:26 #15 Phase 36 File dlgbrnst.cpp, Line 1832
 Burn process started at 4x (5 540 KB/s)
 
21:09:26 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
 
21:09:26 #17 Text 0 File DVDR.cpp, Line 2267
 Recording mode: Sequential Recording Mode
 
21:09:26 #18 Text 0 File Mmc.cpp, Line 21469
 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
 
21:09:26 #19 Text 0 File DVDR.cpp, Line 2421
 Start write address at LBA 0
 DVD high compatibility mode: Yes
 
21:09:26 #20 Text 0 File Cdrdrv.cpp, Line 8438
 ---- DVD Structure: Physical Format Information (00h) ----
 Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
  Book Type: DVD-R   (2), Part Version: 5
  Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
  Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
  Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
  Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
  End Physical Sector Number of Data Area:      0 h
  End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
  Data in Burst Cutting Area (BCA) does not exist
   Start sector number of the current Border-Out: 0 h
   Start sector number of the next Border-In:     0 h
  Media Specific [16..63]:
       00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
       00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
       00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
 
21:09:38 #21 SCSI -500 File Cdrdrv.cpp, Line 1436
 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06900000
 Status:     0x02 (0x03, SCSI_ABORTED)
 HA-Status   0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x26
 Sense Qual: 0x02
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00  
 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x26 0x02  
 
21:09:43 #22 Text 0 File Cdrdrv.cpp, Line 1288
 21:09:43.000 - LITE-ON DVDRW LDW-851S\H1 T1 : Queue again later
 
21:09:59 #23 SCSI -1076 File Cdrdrv.cpp, Line 1436
 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06E90600
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x06 (KEY_UNIT_ATTENTION)
 Sense Code: 0x28
 Sense Qual: 0x00
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00  
 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A  
             0x00 0x00 0x00 0x00 0x28 0x00  
 
21:09:59 #24 CDR -1076 File Writer.cpp, Line 311
 Disc changed
 
21:09:59 #25 Text 0 File ThreadedTransfer.cpp, Line 228
 all writers idle, stopping conversion
 
21:09:59 #26 Text 0 File ThreadedTransfer.cpp, Line 222
 conversion idle, stopping reader
 
21:09:59 #27 Text 0 File DVDR.cpp, Line 2658
 EndDAO: Last written address was -1
 
21:09:59 #28 Phase 38 File dlgbrnst.cpp, Line 1832
 Burn process failed at 4x (5 540 KB/s)
 
 
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 13:33:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13/11/2002 09:10:00 (Adapter driver for rec)
 
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)  
 
-------------------------------------------------------------------------  

Reply

Marsh Posté le 17-05-2005 à 21:18:38   

Reply

Marsh Posté le 18-05-2005 à 19:22:25    

UP  :bounce:

Reply

Marsh Posté le 24-05-2005 à 22:09:54    

UP
 
 :bounce:  :bounce:  :bounce:

Reply

Marsh Posté le 24-05-2005 à 23:44:06    

il n'est pas en dma !!!
 
va dans le gestionnair de peipherique
ensuite va dans controlleur ATA/ATAPI ide
ensuite double clic sur canal ide principal
puis parametre avancé, et met les deux choix a DMA si possible.
 
fait pareil pour le canal ide secondaire !!!
et re tente un gravage...
 
tu utilise bien des nappes UDMA ??

Reply

Marsh Posté le 25-05-2005 à 01:01:22    

Le DMA Off dans nero est normal sur du nforce

Reply

Marsh Posté le 25-05-2005 à 19:34:14    

je m'incruste  :hello:  
est ce que les derniers drivers nforce corrige le probleme ou bien il ne faut jamais installer les drivers ide nforce quand on veut graver ?

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed