Drive Image 5 ou 2202 ?

Drive Image 5 ou 2202 ? - Windows & Software

Marsh Posté le 02-06-2002 à 11:32:03    

Quelle différence entre les deux ?

Reply

Marsh Posté le 02-06-2002 à 11:32:03   

Reply

Marsh Posté le 02-06-2002 à 11:33:03    

2002 et non 2202 bien sur ! Sorry !

Reply

Marsh Posté le 02-06-2002 à 11:44:48    

Ceci :
 
Drive Image 2002 includes the following new features:
 
- Native Windows version of Drive Image. Drive Image  
  runs in Windows if it can lock each partition (that is,  
  if there are no files opened on the partitions) involved  
  in the task you are performing. If Drive Image cannot  
  lock the partitions, it will go into DOS boot mode to  
  perform the operations. You do not need to enter  
  information from DOS unless you run Drive Image DOS from  
  the rescue diskettes.
 
- Limited partitioning capability to create and maintain a  
  backup location on the hard disk.
 
- CD-R and CD-R/W support. Drive Image lets you create images  
  directly to CDs (just as you can using Drive Image DOS).  
  You need no other third-party software or drivers. If Drive  
  Image cannot execute in Windows, it will burn the CD in DOS  
  boot mode.
 
- Network support. If Drive Image can execute natively in Windows  
  (in other words, if there are no open files on the partitions  
  being imaged or the location where the image is being restored),  
  you can just select the corresponding network drive letter to  
  create or restore an image on the network. The Boot Disk Builder  
  program included with Drive Image lets you create or restore  
  images to or from a network drive even when Drive Image must  
  execute in DOS boot mode (or if you run Drive Image from the  
  rescue diskettes). DOS support for network devices is dependent  
  upon the availability of DOS NIC drivers for your NIC. Drive  
  Image ships with some of the most common NIC drivers.
 
- Four new wizards:
 
 Initial Backup Wizard - Lets you create an image of  
 your system to removable media (such as a CD-R or CD-R/W)
 before modifying drives on the hard disks.
 
 Setup Wizard - Selects or creates a backup partition  
 on the hard disk for storing backup images.
 
 Create New Partition (found in the Disk Operations  
 feature) - Lets you create a new partition  
 on your hard disk.
 
 Redistribute Free Space Wizard - Assists in maintaining  
 or cleaning up your hard disk. If you run out of space to  
 store image files on your backup partition, you can use  
 this wizard to equalize free space on all the partitions  
 on the hard disk, increasing space for the backup partition.  
 If you remove the backup partition from the hard disk, you can  
 use this wizard to put the space that was in your backup  
 location back into other partitions that you are still  
 using (such as your C: drive).
 
- USB/FireWire support. Drive Image lets you create or restore images  
  to and from USB or FireWire drives if Drive Image can execute
  natively in Windows (without dropping to DOS boot mode). If Drive
  Image must execute in DOS boot mode, support for such devices is
  dependent upon the availability of DOS drivers for the drives.


---------------
~~~~~~~~~~~~~~~~~~~~~~~~
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed