iNET
x
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx
 
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
Nero Version: 5.5.6.4
Recorder:             <PLEXTOR CD-R PX-R820T>   Version: 1.07 - HA 0 TA 0 - 5.5.6.4
Adapter driver:      <symc8xx>                 HA 0
Drive buffer  :      4096kB
Bus Type      :      default (0) -> SCSI
CD-ROM:               <PLEXTOR  CD-ROM PX-40TS> Version: 1.10 - HA 0 TA 3 - 5.5.6.4
Adapter driver:      <symc8xx>                 HA 0
Bus Type      :      default (0) -> SCSI
PLEXTOR CD-R   PX-R820T (Target 0, G : Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
PLEXTOR CD-ROM PX-40TS (Target 3, H : Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:  
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 255MB (261616kB)
Free physical memory: 0MB (28kB)
Memory in use       : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Wizard: Off
 
CD-ROM (ISO)
28.1.2002
 
14:39:04 #1 Text 0 File Reader.cpp, Line 117
Reader running
 
14:39:04 #2 Text 0 File Writer.cpp, Line 127
Writer PLEXTOR  CD-R   PX-R820T  running
 
14:39:04 #3 ISO9660GEN -11 File geniso.cpp, Line 4307
First writeable address = 0 (0x00000000)
 
14:39:04 #4 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
 0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 332065 (332065) = #332065/73:47.40
    relocatable, CD pos for caching/writing not required/required, no patch infos  
--------------------------------------------------------------
 
14:39:06 #5 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media:   359848 (79:59.73)
Last address to be written:             332067 (73:49.42)
 
14:39:07 #6 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder:  PLEXTOR CD-R PX-R820T;
   CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
   ATIP Data:
     Special    Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4F 3B 4A (LO 79:59.74)
     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
 
14:39:10 #7 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR  CD-R   PX-R820T  for write in TAO
DAO infos:
==========
MCN:  
TOCTYPE: 0x0   Close Session
Tracks 1 to 1:
   TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 680376320
 
14:39:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
 
14:39:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
 0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 332065 (332065) = #332065/73:47.40
    relocatable, CD pos for caching/writing not required/required, no patch infos  
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 332063 blocks [PLEXTOR  CD-R   PX-R820T ]
--------------------------------------------------------------
 
14:39:10 #10 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started
 
14:39:10 #11 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed
 
14:39:10 #12 Phase 28 File dlgbrnst.cpp, Line 1436
Speed measurement started
 
14:39:10 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
 
14:41:15 #14 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
 
14:41:16 #15 Phase 29 File dlgbrnst.cpp, Line 1396
Speed measurement completed: 35,7x (5 355 Ko/s)
 
14:41:16 #16 Phase 32 File dlgbrnst.cpp, Line 1436
Simulation started at 8x (1 200 Ko/s)
 
14:41:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
 
14:50:25 #18 SCSI -1135 File Cdrdrv.cpp, Line 1407
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03BDADD8
Status:     0x04 (0x01, SCSI_ERR)
HA-Status   0x00 (0x00, OK)
TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key:  0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data:   0x2A 0x00 0x00 0x04 0xFE 0x25 0x00 0x00 0x1F 0x00  
Sense Data: 0xF0 0x00 0x03 0x00 0x04 0xFE 0xBB 0x0A  
            0x00 0x00 0x00 0x00 0x0C 0x07  
 
14:50:25 #19 mmc -1135 File Writer.cpp, Line 321
Write error
 
14:50:25 #20 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
 
14:50:25 #21 CDR -201 File WriterStatus.cpp, Line 145
Invalid writestate
 
14:50:25 #22 TRANSFER -18 File WriterStatus.cpp, Line 145
Could not perform EndTrack
 
14:50:25 #23 Phase 34 File dlgbrnst.cpp, Line 1436
Simulation failed at 8x (1 200 Ko/s)
 
14:50:25 #24 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
 
 
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 28/01/02 14:23:22
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69578 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00