[MDV]installer une tablette graphique( xorg.conf et xorg.0.log inside)

installer une tablette graphique( xorg.conf et xorg.0.log inside) [MDV] - Hardware - Linux et OS Alternatifs

Marsh Posté le 19-12-2009 à 20:21:31    

bonsoir
 
Mon père vien de me filer une table graphique A3, bon qui est assez ancienne mais qui marche aparement, c'est la summasketch 3 professionnal elle a une sorti en port série.
 
seulement je n'arrive pas a la faire fonctionner sous mandriva 2010.0, mon père l'a deja testé sous linux il ya quelques années. j'ai donc installé X11-input-summa sans problème, et modifié xorg.conf dans /etc/x11/ afin d' "installer la tablette", mais rien de se passe le curseur de la souris ne bouge pas quand j'utilise la tablette.
 
voici mon xorg.conf

Code :
  1. # File generated by XFdrake (rev )
  3. # nvidia-xconfig: X configuration file generated by nvidia-xconfig
  4. # nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Fri Aug 14 18:33:37 PDT 2009
  6. # File generated by XFdrake (rev )
  8. Section "ServerLayout"
  9.     Identifier "Layout0"
  10.     InputDevice "Keyboard0" "CoreKeyboard"
  11.     InputDevice "SummaSketch III" "SendCoreEvents"
  12.     Screen 0 "Screen0" 0 0
  13. EndSection
  15. Section "Files"
  16.     FontPath "/usr/share/fonts/default/Type1"
  17. EndSection
  19. Section "InputDevice"
  20.     # generated from data in "/etc/sysconfig/keyboard"
  21.     Identifier "Keyboard0"
  22.     Driver "kbd"
  23.     Option "XkbModel" "pc105"
  24.     Option "XkbLayout" "fr"
  25. EndSection
  27. Section "Monitor"
  28.     Identifier "Monitor0"
  29.     VendorName "Unknown"
  30.     ModelName "Unknown"
  31.     HorizSync 28.0 - 33.0
  32.     VertRefresh 43.0 - 72.0
  33.     Option "DPMS"
  34. EndSection
  36. Section "Device"
  37.     Identifier "Device0"
  38.     VendorName "NVIDIA Corporation"
  39.     Driver "nvidia"
  40. EndSection
  42. Section "Screen"
  43.     Identifier "Screen0"
  44.     Device "Device0"
  45.     Monitor "Monitor0"
  46.     DefaultDepth 24
  47.    
  48.     Subsection "Display"
  49.         Depth 24
  50.     EndSubsection
  51. EndSection
  53. Section "Module"
  54.     Load "summa"
  55. EndSection
  57. Section "InputDevice"
  58.     Identifier "SummaSketch III"
  59.     Driver "summa"
  60.     Option "Device" "/dev/ttyS0"
  61.     Option "Mode" "Absolute"
  62.     Option "Compatible" "true"
  63.     Option "MaxX" "12000"
  64.     Option "Potocol" "Auto"
  65.     Option "AlwaysCore" "true"
  66.     Option "Resolution" "2540"
  67.     Option "MaxY" "12000"
  68.     Option "InputFashion" "Tablet"
  69.     Option "Cursor" "stylus"
  70.     Option "Name" "SummaSketch III"
  71.     Option "SendCoreEvents" "on"
  72. EndSection


 
et voici /var/log/Xorg.0.log

Code :
  1. X.Org X Server 1.6.5
  2. Release Date: 2009-10-11
  3. X Protocol Version 11, Revision 0
  4. Build Operating System: Linux_2.6.22.12-server-1mdv Mandriva
  5. Current Operating System: Linux asterix.keridwenn.homeip.net 2.6.31.5-desktop-1mnb #1 SMP Fri Oct 23 00:05:22 EDT 2009 x86_64
  6. Build Date: 13 October 2009  12:19:32PM
  8. Before reporting problems, check http://qa.mandriva.com
  9. to make sure that you have the latest version.
  10. Markers: (--) probed, (**) from config file, (==) default setting,
  11. (++) from command line, (!!) notice, (II) informational,
  12. (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  13. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 19 21:49:55 2009
  14. (==) Using config file: "/etc/X11/xorg.conf"
  15. (==) ServerLayout "Layout0"
  16. (**) |-->Screen "Screen0" (0)
  17. (**) |   |-->Monitor "Monitor0"
  18. (**) |   |-->Device "Device0"
  19. (**) |-->Input Device "Keyboard0"
  20. (**) |-->Input Device "SummaSketch III"
  21. (==) Automatically adding devices
  22. (==) Automatically enabling devices
  23. (**) FontPath set to:
  24. /usr/share/fonts/default/Type1,
  25. catalogue:/etc/X11/fontpath.d
  26. (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
  27. (II) Cannot locate a core pointer device.
  28. (II) The server relies on HAL to provide the list of input devices.
  29. If no devices become available, reconfigure HAL or disable AllowEmptyInput.
  30. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
  31. (WW) Disabling Keyboard0
  32. (II) Loader magic: 0xb40
  33. (II) Module ABI versions:
  34. X.Org ANSI C Emulation: 0.4
  35. X.Org Video Driver: 5.0
  36. X.Org XInput driver : 4.0
  37. X.Org Server Extension : 2.0
  38. (II) Loader running on linux
  39. (++) using VT number 7
  41. (--) PCI:*(0:1:0:0) 10de:0402:10de:050e nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
  42. (II) Open ACPI successful (/var/run/acpid.socket)
  43. (II) System resource ranges:
  44. [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
  45. [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
  46. [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
  47. [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
  48. [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
  49. [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
  50. (II) "extmod" will be loaded by default.
  51. (II) "dbe" will be loaded by default.
  52. (II) "glx" will be loaded by default.
  53. (II) "record" will be loaded by default.
  54. (II) "dri" will be loaded by default.
  55. (II) "dri2" will be loaded by default.
  56. (II) LoadModule: "summa"
  57. (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
  58. (II) Module summa: vendor="X.Org Foundation"
  59. compiled for 1.4.2, module version = 1.2.0
  60. Module class: X.Org XInput Driver
  61. ABI class: X.Org XInput driver, version 2.0
  62. (EE) module ABI major version (2) doesn't match the server's version (4)
  63. (II) UnloadModule: "summa"
  64. (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
  65. (EE) Failed to load module "summa" (module requirement mismatch, 0)
  66. (II) LoadModule: "extmod"
  67. (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
  68. (II) Module extmod: vendor="X.Org Foundation"
  69. compiled for 1.6.5, module version = 1.0.0
  70. Module class: X.Org Server Extension
  71. ABI class: X.Org Server Extension, version 2.0
  72. (II) Loading extension Multi-Buffering
  73. (II) Loading extension MIT-SCREEN-SAVER
  74. (II) Loading extension XFree86-VidModeExtension
  75. (II) Loading extension XFree86-DGA
  76. (II) Loading extension DPMS
  77. (II) Loading extension XVideo
  78. (II) Loading extension XVideo-MotionCompensation
  79. (II) Loading extension X-Resource
  80. (II) LoadModule: "dbe"
  81. (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
  82. (II) Module dbe: vendor="X.Org Foundation"
  83. compiled for 1.6.5, module version = 1.0.0
  84. Module class: X.Org Server Extension
  85. ABI class: X.Org Server Extension, version 2.0
  86. (II) Loading extension DOUBLE-BUFFER
  87. (II) LoadModule: "glx"
  88. (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
  89. (II) Module glx: vendor="NVIDIA Corporation"
  90. compiled for 4.0.2, module version = 1.0.0
  91. Module class: X.Org Server Extension
  92. (II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009
  93. (II) Loading extension GLX
  94. (II) LoadModule: "record"
  95. (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
  96. (II) Module record: vendor="X.Org Foundation"
  97. compiled for 1.6.5, module version = 1.13.0
  98. Module class: X.Org Server Extension
  99. ABI class: X.Org Server Extension, version 2.0
  100. (II) Loading extension RECORD
  101. (II) LoadModule: "dri"
  102. (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
  103. (II) Module dri: vendor="X.Org Foundation"
  104. compiled for 1.6.5, module version = 1.0.0
  105. ABI class: X.Org Server Extension, version 2.0
  106. (II) Loading extension XFree86-DRI
  107. (II) LoadModule: "dri2"
  108. (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
  109. (II) Module dri2: vendor="X.Org Foundation"
  110. compiled for 1.6.5, module version = 1.1.0
  111. ABI class: X.Org Server Extension, version 2.0
  112. (II) Loading extension DRI2
  113. (II) LoadModule: "nvidia"
  114. (II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
  115. (II) Module nvidia: vendor="NVIDIA Corporation"
  116. compiled for 4.0.2, module version = 1.0.0
  117. Module class: X.Org Video Driver
  118. (II) LoadModule: "summa"
  119. (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
  120. (II) Module summa: vendor="X.Org Foundation"
  121. compiled for 1.4.2, module version = 1.2.0
  122. Module class: X.Org XInput Driver
  123. ABI class: X.Org XInput driver, version 2.0
  124. (EE) module ABI major version (2) doesn't match the server's version (4)
  125. (II) UnloadModule: "summa"
  126. (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
  127. (EE) Failed to load module "summa" (module requirement mismatch, 0)
  128. (II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:51:02 PDT 2009
  129. (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
  130. (II) Primary Device is: PCI 01@00:00:0
  131. (II) Loading sub module "fb"
  132. (II) LoadModule: "fb"
  133. (II) Loading /usr/lib64/xorg/modules//libfb.so
  134. (II) Module fb: vendor="X.Org Foundation"
  135. compiled for 1.6.5, module version = 1.0.0
  136. ABI class: X.Org ANSI C Emulation, version 0.4
  137. (II) Loading sub module "wfb"
  138. (II) LoadModule: "wfb"
  139. (II) Loading /usr/lib64/xorg/modules//libwfb.so
  140. (II) Module wfb: vendor="X.Org Foundation"
  141. compiled for 1.6.5, module version = 1.0.0
  142. ABI class: X.Org ANSI C Emulation, version 0.4
  143. (II) Loading sub module "ramdac"
  144. (II) LoadModule: "ramdac"
  145. (II) Module "ramdac" already built-in
  146. (II) resource ranges after probing:
  147. [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
  148. [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
  149. [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
  150. [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
  151. [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
  152. [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
  153. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
  154. (==) NVIDIA(0): RGB weight 888
  155. (==) NVIDIA(0): Default visual is TrueColor
  156. (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
  157. (**) NVIDIA(0): Enabling RENDER acceleration
  158. (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
  159. (II) NVIDIA(0):     enabled.
  160. (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
  161. (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
  162. (--) NVIDIA(0): Memory: 524288 kBytes
  163. (--) NVIDIA(0): VideoBIOS: 60.84.54.00.00
  164. (II) NVIDIA(0): Detected PCI Express Link width: 16X
  165. (--) NVIDIA(0): Interlaced video modes are supported on this GPU
  166. (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
  167. (--) NVIDIA(0):     CRT-0
  168. (--) NVIDIA(0):     ACI PW191 (CRT-1)
  169. (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
  170. (--) NVIDIA(0): ACI PW191 (CRT-1): 400.0 MHz maximum pixel clock
  171. (II) NVIDIA(0): Assigned Display Device: CRT-1
  172. (==) NVIDIA(0):
  173. (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
  174. (==) NVIDIA(0):     will be used as the requested mode.
  175. (==) NVIDIA(0):
  176. (II) NVIDIA(0): Validated modes:
  177. (II) NVIDIA(0):     "nvidia-auto-select"
  178. (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
  179. (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
  180. (--) NVIDIA(0):     option
  181. (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
  182. (--) Depth 24 pixmap format is 32 bpp
  183. (II) do I need RAC?  No, I don't.
  184. (II) resource ranges after preInit:
  185. [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
  186. [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
  187. [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
  188. [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
  189. [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
  190. [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
  191. (II) NVIDIA(0): Initialized GPU GART.
  192. (II) NVIDIA(0): Setting mode "nvidia-auto-select"
  193. (II) Loading extension NV-GLX
  194. (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
  195. (==) NVIDIA(0): Disabling shared memory pixmaps
  196. (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
  197. (==) NVIDIA(0): Backing store disabled
  198. (==) NVIDIA(0): Silken mouse enabled
  199. (**) NVIDIA(0): DPMS enabled
  200. (II) Loading extension NV-CONTROL
  201. (II) Loading extension XINERAMA
  202. (==) RandR enabled
  203. (II) Initializing built-in extension Generic Event Extension
  204. (II) Initializing built-in extension SHAPE
  205. (II) Initializing built-in extension MIT-SHM
  206. (II) Initializing built-in extension XInputExtension
  207. (II) Initializing built-in extension XTEST
  208. (II) Initializing built-in extension BIG-REQUESTS
  209. (II) Initializing built-in extension SYNC
  210. (II) Initializing built-in extension XKEYBOARD
  211. (II) Initializing built-in extension XC-MISC
  212. (II) Initializing built-in extension SECURITY
  213. (II) Initializing built-in extension XINERAMA
  214. (II) Initializing built-in extension XFIXES
  215. (II) Initializing built-in extension XFree86-Bigfont
  216. (II) Initializing built-in extension RENDER
  217. (II) Initializing built-in extension RANDR
  218. (II) Initializing built-in extension COMPOSITE
  219. (II) Initializing built-in extension DAMAGE
  220. (II) Initializing extension GLX
  221. (II) LoadModule: "summa"
  222. (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
  223. (II) Module summa: vendor="X.Org Foundation"
  224. compiled for 1.4.2, module version = 1.2.0
  225. Module class: X.Org XInput Driver
  226. ABI class: X.Org XInput driver, version 2.0
  227. (EE) module ABI major version (2) doesn't match the server's version (4)
  228. (II) UnloadModule: "summa"
  229. (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
  230. (EE) Failed to load module "summa" (module requirement mismatch, 0)
  231. (EE) No input driver matching `summa'
  232. (II) config/hal: Adding input device AT Translated Set 2 keyboard
  233. (II) LoadModule: "evdev"
  234. (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
  235. (II) Module evdev: vendor="X.Org Foundation"
  236. compiled for 1.6.3, module version = 2.2.5
  237. Module class: X.Org XInput Driver
  238. ABI class: X.Org XInput driver, version 4.0
  239. (**) AT Translated Set 2 keyboard: always reports core events
  240. (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
  241. (II) AT Translated Set 2 keyboard: Found keys
  242. (II) AT Translated Set 2 keyboard: Configuring as keyboard
  243. (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
  244. (**) Option "xkb_rules" "evdev"
  245. (**) Option "xkb_model" "pc105"
  246. (**) Option "xkb_layout" "fr"
  247. (**) Option "xkb_options" "compose:rwin"
  248. (II) config/hal: Adding input device Power Button
  249. (**) Power Button: always reports core events
  250. (**) Power Button: Device: "/dev/input/event3"
  251. (II) Power Button: Found keys
  252. (II) Power Button: Configuring as keyboard
  253. (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
  254. (**) Option "xkb_rules" "evdev"
  255. (**) Option "xkb_model" "pc105"
  256. (**) Option "xkb_layout" "fr"
  257. (**) Option "xkb_options" "compose:rwin"
  258. (II) config/hal: Adding input device Power Button
  259. (**) Power Button: always reports core events
  260. (**) Power Button: Device: "/dev/input/event2"
  261. (II) Power Button: Found keys
  262. (II) Power Button: Configuring as keyboard
  263. (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
  264. (**) Option "xkb_rules" "evdev"
  265. (**) Option "xkb_model" "pc105"
  266. (**) Option "xkb_layout" "fr"
  267. (**) Option "xkb_options" "compose:rwin"
  268. (II) config/hal: Adding input device Macintosh mouse button emulation
  269. (**) Macintosh mouse button emulation: always reports core events
  270. (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
  271. (II) Macintosh mouse button emulation: Found 3 mouse buttons
  272. (II) Macintosh mouse button emulation: Found x and y relative axes
  273. (II) Macintosh mouse button emulation: Configuring as mouse
  274. (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
  275. (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  276. (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
  277. (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
  278. (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
  279. (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
  280. (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
  281. (II) Macintosh mouse button emulation: initialized for relative axes.
  282. (II) Open ACPI successful (/var/run/acpid.socket)
  283. (II) NVIDIA(0): Setting mode "nvidia-auto-select"
  284. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
  285. (II) Power Button: Device reopened after 1 attempts.
  286. (II) Power Button: Device reopened after 1 attempts.
  287. (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
  288. (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
  289. (**) Logitech USB-PS/2 Optical Mouse: always reports core events
  290. (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
  291. (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
  292. (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
  293. (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
  294. (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
  295. (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
  296. (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  297. (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
  298. (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
  299. (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
  300. (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
  301. (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
  302. (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.


 
par contre on peut voir des message d'erreur a la ligne 63,64,65,66 - 125,126,127,128 - 228,229,230,231,232
 
comment puis-je les résoudre?
 
ps: j'ai essayé sous window seven par l'intermediaire d'un adaptateur serie usb j'arrive a voir "usb serial port" mais je n'arrive pas à le faire reconaitre et je vois aussi "usb serial converter" qui lui est reconnu mais sa c'est l'adaptateur serie/usb
 
euh si je ne suis pas dans la bonne catégorie veuilliez me le faire part


---------------
mon feed back : http://forum.hardware.fr/hfr/Achat [...] 4251_1.htm
Reply

Marsh Posté le 19-12-2009 à 20:21:31   

Reply

Marsh Posté le 19-12-2009 à 20:23:49    

T'es sous Mandriva et t'as pas testé avec le Mandriva Control Center ?


---------------
Décentralisons Internet-Bépo-Troll Bingo - "Pour adoucir le mélange, pressez trois quartiers d’orange !"
Reply

Marsh Posté le 19-12-2009 à 20:40:48    

si bien sur que j'ai regardé dans la partie configurer votre materiel mais je ne vois rien concernant cette tablette meme pas dans la partie "souris"


---------------
mon feed back : http://forum.hardware.fr/hfr/Achat [...] 4251_1.htm
Reply

Marsh Posté le 21-12-2009 à 10:32:48    

personne?


---------------
mon feed back : http://forum.hardware.fr/hfr/Achat [...] 4251_1.htm
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed