Cisco 851 et L2TP Passthrough

Cisco 851 et L2TP Passthrough - Réseaux - Réseaux grand public / SoHo

Marsh Posté le 18-03-2007 à 13:08:05    

Bonjour,
 
Nous avons un routeur Cisco 851 derrière lequel nous hébergeons des services Web (HTTP et HTTPS), email (SMTP) et VPN (PPTP, L2TP).
 
N'y connaissans pas grand chose en CLI Cisco, j'ai utilisé le SDM pour ouvrir les ports nécessaires.
J'ai pu ouvrir les ports Web, Mail et PPTP et ils sont fonctionnels. Cependant, bien que je pense avoir fait le nécessaire pour le protocol L2TP, la connexion n'est pas initiée et le serveur recevant les requetes L2TP ne reçoit aucun packet. Pouvez-vous valider ma configuration.
 
IP du Cisco : 192.168.0.254
Serveur Web, Mail, VPN : 192.168.0.253
 
J'ai ouvert et redirigé les ports suivants :
 

ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static udp 192.168.0.253 4500 interface Dialer0 4500
ip nat inside source static udp 192.168.0.253 500 interface Dialer0 500
ip nat inside source static udp 192.168.0.253 1701 interface Dialer0 1701
ip nat inside source static tcp 192.168.0.253 1723 interface Dialer0 1723
ip nat inside source static tcp 192.168.0.253 25 interface Dialer0 25
ip nat inside source static tcp 192.168.0.253 443 interface Dialer0 443
ip nat inside source static tcp 192.168.0.253 80 interface Dialer0 80


 
Et le Firewall a les règles suivantes
 

access-list 101 remark HTTP
access-list 101 permit tcp any any eq www
access-list 101 remark HTTPS
access-list 101 permit tcp any any eq 443
access-list 101 remark SMTP
access-list 101 permit tcp any any eq smtp
access-list 101 remark PPTP
access-list 101 permit tcp any any eq 1723
access-list 101 remark L2TP
access-list 101 permit udp any any eq 1701
access-list 101 remark IKE
access-list 101 permit udp any any eq isakmp
access-list 101 remark IPSec NAT-T
access-list 101 permit udp any any eq non500-isakmp
access-list 101 remark GRE
access-list 101 permit gre any any


 
 
Merci
 
FICHIER DE CONFIGURATION COMPLET
 


Building configuration...
 
Current configuration : 7101 bytes
!
! Last configuration change at 13:30:08 PCTime Sun Mar 18 2007 by admin
! NVRAM config last updated at 09:24:00 PCTime Tue Dec 26 2006 by cisco
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname fr-par-wan1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 debugging
logging console critical
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxx
!
no aaa new-model
!
resource policy
!
clock timezone PCTime 1
clock summer-time PCTime date Mar 30 2003 2:00 Oct 26 2003 3:00
ip subnet-zero
no ip source-route
!
!
ip cef
ip inspect name DEFAULT100 cuseeme
ip inspect name DEFAULT100 ftp
ip inspect name DEFAULT100 h323
ip inspect name DEFAULT100 icmp
ip inspect name DEFAULT100 rcmd
ip inspect name DEFAULT100 realaudio
ip inspect name DEFAULT100 rtsp
ip inspect name DEFAULT100 esmtp
ip inspect name DEFAULT100 sqlnet
ip inspect name DEFAULT100 streamworks
ip inspect name DEFAULT100 tftp
ip inspect name DEFAULT100 tcp
ip inspect name DEFAULT100 udp
ip inspect name DEFAULT100 vdolive
ip tcp synwait-time 10
no ip bootp server
ip domain name domaine.local
ip name-server 194.2.0.20
ip name-server 194.2.0.50
ip ssh time-out 60
ip ssh authentication-retries 2
!
!
crypto pki trustpoint TP-self-signed-361402317
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-361402317
 revocation-check none
 rsakeypair TP-self-signed-361402317
!
!
crypto pki certificate chain TP-self-signed-361402317
 certificate self-signed 01
 
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
 
  quit
username admin privilege 15 secret 5 xxxxxxxxxxxxxxxxxxx
!
!  
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
 description $ES_WAN$$FW_OUTSIDE$
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip route-cache flow
 duplex auto
 speed auto
 pppoe enable
 pppoe-client dial-pool-number 1
!
interface Vlan1
 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
 ip address 192.168.0.254 255.255.255.0
 ip access-group 100 in
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip nat inside
 ip virtual-reassembly
 ip route-cache flow
 ip tcp adjust-mss 1412
!
interface Dialer0
 description $FW_OUTSIDE$
 ip address negotiated
 ip access-group 101 in
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip mtu 1452
 ip inspect DEFAULT100 out
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 ip route-cache flow
 dialer pool 1
 dialer-group 1
 no cdp enable
 ppp authentication chap callin
 ppp chap hostname xxxxxxxxxxxxx
 ppp chap password 7 xxxxxxxxxxxxx
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static udp 192.168.0.253 4500 interface Dialer0 4500
ip nat inside source static udp 192.168.0.253 500 interface Dialer0 500
ip nat inside source static udp 192.168.0.253 1701 interface Dialer0 1701
ip nat inside source static tcp 192.168.0.253 1723 interface Dialer0 1723
ip nat inside source static tcp 192.168.0.253 25 interface Dialer0 25
ip nat inside source static tcp 192.168.0.253 443 interface Dialer0 443
ip nat inside source static tcp 192.168.0.253 80 interface Dialer0 80
!
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 100 remark auto generated by Cisco SDM Express firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny   ip host 255.255.255.255 any
access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by Cisco SDM Express firewall configuration
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp host 194.2.0.50 eq domain any
access-list 101 permit udp host 194.2.0.20 eq domain any
access-list 101 remark HTTP
access-list 101 permit tcp any any eq www
access-list 101 remark HTTPS
access-list 101 permit tcp any any eq 443
access-list 101 remark SMTP
access-list 101 permit tcp any any eq smtp
access-list 101 remark PPTP
access-list 101 permit tcp any any eq 1723
access-list 101 remark L2TP
access-list 101 permit udp any any eq 1701
access-list 101 remark IKE
access-list 101 permit udp any any eq isakmp
access-list 101 remark IPSec NAT-T
access-list 101 permit udp any any eq non500-isakmp
access-list 101 remark GRE
access-list 101 permit gre any any
access-list 101 deny   ip 192.168.0.0 0.0.0.255 any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny   ip 10.0.0.0 0.255.255.255 any
access-list 101 deny   ip 172.16.0.0 0.15.255.255 any
access-list 101 deny   ip 192.168.0.0 0.0.255.255 any
access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
access-list 101 deny   ip host 255.255.255.255 any
access-list 101 deny   ip host 0.0.0.0 any
access-list 101 deny   ip any any
dialer-list 1 protocol ip permit
no cdp run
!
control-plane
!
banner login ^CAuthorized access only!
 Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
 login local
 no modem enable
 transport output telnet
line aux 0
 login local
 transport output telnet
line vty 0 4
 privilege level 15
 login local
 transport input telnet ssh
!
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end


 

Reply

Marsh Posté le 18-03-2007 à 13:08:05   

Reply

Marsh Posté le 21-03-2007 à 23:12:50    

Un petit Up.

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed